Can not get Macbook pro to connect to my network

Similar Questions

• I can't get MacBook Pro to start what it is.

  I have a MacBook in early 2011 Pro 15 ".  The other day, while he was playing in Mainstage my computer decided to restart but never got past the loading of 3/4 bar.  I have run all shortcuts start and seem to restrict the question down to the hard drive.  I bought a new ssd and then had to borrow a friends MacBook to connect with disk utility (my computer wasn't allowing me to any disk utility) to format the ssd drive and install OS X.  I installed the new ssd in my MacBook and I always get the same question.  I can't get into anything other than the single-user mode.  What is a motherboard problem or a firmware issue?  Someone at - it any other ideas?  RAM is tested ok, ssd tested ok, clean install of Mac OS X starts with another computer so that the work of.  Tested cable SATA, reset SMC and LANDAU, ok I can't access internet recovery mode (it loads, and then the screen goes black to white).  I'll try a firmware reset disk, I don't know how it will work but when I can't access anything whatsoever...

  I guess that's an incorrect configuration of the installed SSD. Assuming that there is no mechanical problem with the installation of the SSD, here is how you should have put in place.

  Clean Install of Mac OS X

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  This will not work if your computer is capable of a resumption of network. See the computers that can be upgraded to use OS X Internet Recovery to see if you can use this method. If this isn't the case, then your computer initially comes with a version of Snow Leopard on an installation disc. Can you use this disk to partition and format the SSD install Snow Leopard. 10.6.6 or later, is required to access the App Store, where you can download El Capitan for installation.

• BlackBerry Smartphones can not get my 8330 to connect to the computer

  Hello, this is a new phone - replacement of a previous 8330.  Initially it connected very well and I downloaded the new software for it - I am running 4.5 on both desktop and handheld computer, I was able to sync my contacts and apps for the new phone - everything seemed fine.  A few days later, I connected to my computer to update my calendar and it still not connected.  When I first log in, it says as well on handheld computer and the computer on which it is plugged - then it just stops.  I know that it is connected to the computer because the computer - simply not recognize Office Manager.  I deleted the program from the computer three times now (oh yes, I tried it on work and home computers) and re-installed and nothing seems to work.  If anyone has any ideas, please help - I called Telus technical support and they couldn't tell me a * beep * thing either!

  Cool! Gald you guessed it work.

  Take a second and solve the thread so that others will find your answer faster.

  Thank you

  Bifocals

• Can not get my TV to connect to internet wireless gateway ping error any ideas

  I have a samsung tv have information detects the router but gets the gateway ping error

  Hello

  1. what operating system do you use?

  I suggest you follow the link and check.

  HTTP://SUPPORT-US.SAMSUNG.COM/CYBER/POPUP/IFRAME/POP_TROUBLESHOOTING_FR.JSP?IDX=150825&MODELNAME=LN46C750R2F&MODELCODE=&SESSION_ID=NJC1LW8VRG2CJYCF5QVNDHTLS14W2J43BJDHP3Y2KSJGM1ZNJ012!-1826039379! 1761676444! 7501! -1! NONE! 1298367221195

• I just got a new router from ATT and I can not get my pinter to connect it fails with no filtering

  I have a printer of D410a Envy 100 e-all-in-one.  Whenever I try to connect, it finds the wireless SSid name, then I enter the WPA password, it tries, but it fails.  It fails on the no filtering.  The router is a Westell ATT.

  Thanks to everyone who tried to help me.  However, I knew that it would be something simple that I didn't, and I was right.  The network key is case specific, and I used only lowercase letters.  In something, I read late last night I saw this and readmitted by using uppercase letters and it connected.  Everything works fine now.  Again a big thank you to all the world.

• HP 8600 Pro: Windows 10 can't find HP Pro-8600, connected to the network

  I change my router to an Asus ac87u last week and reconnect the printer. The router sees the printer, but when I try to find the printer on the desktop Windows 10, it cannot find the printer. I reconnected it the printer using WPS and the printer says its connected.  When I used the wireless network test, it passes and not say congratulations no problem found.

  The network name is correct, the IP address is assigned, etc.  What should I do to get my Windows 10 office to find this printer... I put the IP address and it cannot be found.

  Hello

  In Control Panel, select network and internet > network and sharing Center.

  What is the location listed for your PC? (See the example below)

  

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• I can't get Windows Live Mail connected online

  I have the internet connection, but I can not get Windows Live Mail connected online, nor Internet explorer.  Any other, Firefox, Skype, Chrome... works very well. Thanks you for FELP.

  Windows Live Mail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• How can I get my wii to connect?

  Hi all

  I just got a wag54g2 to replace and old 3com router. I got it working and it is implemented securly using wep. I have connected my nintendo DS without any problem but I can not get my Wii to connect. I entered the wep security key but it still not connect.

  Hey Hey I sorted it!

  Yes, I double checked the key. what I did to change the configuration of the router to allow anonymous computers attempt to connect.

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• I can not get connected. I log in ID w/microsoft and takes me to a sales page.

  I signed originally as AuntiM4.  I forgot my password then click on "forgotten password".  Went to the email, obtained the temporary code.  Copied and pasted into the password space and still get "incorrect password".  This is what was sent to me.

  If I sign with my identifier Microsoft I takes me to a page with no. where to go but home sales or support.  I was still not able to connect to this program.

  information from the other thread:

  Title:

  I can not get connected. I log in ID w/microsoft and takes me to a sales page.

  thread Description:

  In addition, my Skype name is passed to AuntiM4 somehow live: rosysdtr so I really don't know what password has been used. There is no change.

  Hello Marilyn,.

  Welcome to the Microsoft community!

  You cannot access the AuntiM4, get the message incorrect password and when you try to connect with Microsoft ID, you are redirected to another page.

  The problem may occur if there is a malicious content or if the hosts file is damaged.

  1. the problem occur only when you access the AuntiM4?

  2 did you do changes on the computer before the show?

  To check if the problem is due to malicious content or corruption of the hosts file, I suggest you follow the mentioned steps:

  Method 1:

  See the site:

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2: Reset the Hosts file

   

  See the site:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

  Method 3: Scan the computer to remove all possible malicious content

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• I can not get connected in my original post to Windows Live Hotmail.

  I can not get connected in my original post to hotmail.  I had a virus or someone hacked my account.  Microsoft has tried to help me for 2 days and can not solve my problem.  Is it possible that I can get my Inbox and contacts?

  original title: Correo electronico

  If Microsoft can't help, how the hell someone here would be able to? In all cases,.
  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• I can not get a wired connection on my Samsung laptop, model NP R780 J05uk.

  I can not get a wired connection on my Samsung laptop, model NP R780 J05uk.  In Device Manager, Ethernet controller has an error indicator, and when I click on properties says driver not installed.  I have asked for help to install through windows update, but found nothing.  On the site of Samsung nothing for this driver, only wireless.

  Hi Allan,

  Welcome to the Microsoft community. According to the description, you are unable to get a wired connection.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Residential Group / Network ID Issuee as I can't get the homegroup to connect to my home network

  I am running Win 7 Pro on my laptop and can't get the homegroup to connect to my home network. I have two other computers (wired, one wireless) which are connected and share without problem and can even see (that) the name of my laptop on the network home.

  When I run the troubleshooter to homegroup, it is to identify a network problem, but the next step cannot identify a because my laptop connects wireless both at home and on the road. I think that the problem is in my setting of the network ID and the Discovery Mode as when I try to change the setting for network ID for 'Home' instead of 'Business' it resets right back to business. Same thing happens with trying to turn the discovery mode 'On', it is 'Off '.

  I appreciate all the help that I have been fighting this issue for awhile now and just have not had time to fix.

  Thank you

  Robert

  Hello Robert,.

  Here are the network discovery. Since they may not appear in the Windows Firewall, the place to download Simple Service Discovery Protocol (SSDP-In) and outside, you try to check these services whether or not they are running.

  Follow ' Sebastian Woolley"" "response on August 18."
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4BFF-4DD3-ACEC-ffc3524d44a4

  I hope this helps. Feel free to write us back for assistance.

  Thank you

• How can I use MacBook Pro as an external display?

  I have an apple TV with HDMI and I was wondering how I can use my MacBook Pro (2015) as a screen for the apple TV? They would be connected. HDMI

  Study using ScreenRecycler.

  Ciao.