Can not get my PHP test email to work

Similar Questions

• Can not get my portable floppy drive to work on my computer

  Original title: I have a portable floppy drive that works on all computers but mine! It indicates that the device is installed and ready to use, but when I put in a disc, nothing happens. What can I do?

  It was in the shop and they said it worked fine in my computer to the shop. But at home, nothing. I tried on my old Mac and it works, too, but not on my PC.

  Hi Barrydraw1,

  ·         What operating system is installed on your computer?

  ·         What is the brand and model of the computer?

  ·         The floppy drive is not detected by the computer?

  ·         Have you tried to insert a different floppy disk and check?

  If the drift of floppy is not getting recognized by the computer, and then run the Fixit and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  If your computer does not support floppy drive so it will not work.

  I hope this helps.

• Can not get the XML save data to work

  I'm trying to store data in an XML file.

  I want to create and store this XML file, I copied this example directly from the documentation (http://developer.blackberry.com/cascades/documentation/device_platform/data_access/working_with_xml... but it does not work):

  // Create QVariantMap objects to contain the data for each employee
          QVariantMap firstEmployee;
  
          // Populate each object with data
          firstEmployee["firstName"] = QVariant("Mike");
          firstEmployee["lastName"] = QVariant("Chepesky");
          firstEmployee["number"] = QVariant("51649875");
  
          // Add each employee to a QVariantList
          QVariantList myEmployeeList = QVariantList() << QVariant(firstEmployee);
  
          // Add the employee list to a top-level QVariantMap, then wrap it in a QVariant
          QVariantMap topLevelEmployeeMap;
          topLevelEmployeeMap[".root"] = QVariant("employees");
          topLevelEmployeeMap["employee"] = QVariant(myEmployeeList);
          QVariant myData = QVariant(topLevelEmployeeMap);
  
          // Retrieve the working directory, and create a temporary .xml file in that
          // location
          QDir home = QDir::home();
          QTemporaryFile file2(home.absoluteFilePath("myXMLFile.xml"));
          qDebug() << "Came here";
          qDebug() << home.absoluteFilePath("myXMLFile.xml");
          // Open the file that was created
          if (file2.open()) {
              // Create an XmlDataAccess object and save the data to the file
              qDebug() << "I came in this if statement";
              XmlDataAccess xda;
              xda.save(myData, &file2);
          }
          else
              qDebug() << "I didn't come in this if statement";
  

  After having tried everything, I can't see the .xml file to display in the file Explorer. The print statement that prints the location... /data/ and the second print statement shows he's going in the case.

  I can not even an XML base to save, so I wonder if I'm doing something wrong.

  Thank you

  Hey there,

  Well, the thing is that she is using an object QTemporaryFile (file2) and according to the description of the class QTemporaryFile:

  ".... QTemporaryFile is used to create unique temporary files safely. The file itself is created by calling ( Open). The temporary file name is guaranteed to be unique (that is, you are guaranteed to not overwrite an existing file), and the file will be deleted eventually to the destruction of the object QTemporaryFile... »

  If the object of File2 is destroyed in your application, that would be your problem...  You check in the file while the application is running?  Otherwise, you must use QFile instead so that the file will still be there at the end of your app... etc. etc.

  https://developer.BlackBerry.com/Cascades/reference/QFile.html

• Can not get the States of relaxation for work in the widget of blank publication of Muse

  Hello

  I don't know what I'm doing wrong, but I cannot get States to trigger (thumbnail) to work in the blank publication. That's what I do:

  I click on one of the triggers (thumbnails), open the States Panel, select the Normal State and fill the tile bearing the image of the . Then I select the rollover State and reduce the opacity to 50% or make any other changes to this State. I see [in the States Panel, in design mode] now in the States Panel which show both normal and Active image with an opacity of 100% and turnover and the mouse down show with an opacity of 50%. BUT when I preview the page in the browser, move the pointer of the mouse on the trigger does not change state of the thumbnail. It does not raise the change of the target, but the thumbnail itself doesn't change States. The idea is that when I mouse over the thumbnail, an image appears in the target box. But I also want the thumbnail to change status while in the rollover State. I have attached a screenshot of the Options Panel in case it helps.

  Any help with this will be greatly appreciated!

  Tania

  

  Depending on your options settings of Composition, changing the active State to the same settings as your rollover State. When you hover over the trigger will change and show the target.

• BlackBerry smartphones can not get a stereo Bluetooth headset to work with Pandora

  I have a BB Storm 9530:

  Is it possible to get a stereo Bluetooth headset to work with Pandora?  Or it only works with the 3.5 mm headphone and internal speaker?

  I use my headset for Moto Rokr BT very well with Pandora. While the music is playing, try to hit the button options and see if you get an option to transfer to Bluetooth

• can not get the new hard drive to work in the Pavilion ze4805us laptop

  have an HP pavilion ze4805us laptop which had a total hard drive failure... recovery disks were lost in a fire... replaced the hard drive with a Western Digital 250 GB drive... computer recognizes the drive, but with only 137 GB... impossible to obtain the Windows Millennium disk to install... I have it get the PXE - E61 error code... have looked for answers and tried a few suggestions to fix the error code, but no luck so far... would like to throw this laptop and runs again, it was so nice all in operation. Can someone help me with this? Thanks to all in advance... rrcar6

  At the level of the BIOS, HARD drive should show the full capacity regardless of the distribution, but it will be limited based on what the current logical block installed the BIOS supports.  For example, the 250 GB HDD Needs LBA 48 bit to be recognized by the BIOS in its entirety.  Western Digital only provides downloads of software and support going back to Windows XP.  Windows Millennium Edition is not able to recognize the full capacity of the drive.  Finding drivers compatible with Windows ME is perhaps another challenge that XP uses a different architecture than Windows ME done.

  It seems that this laptop is the same time that the books mentioned in this thread.  Response from JackShack gives the best explanation as to why he shows quite different in the BIOS.  It has been many years, but I do not remember that the capacity of the HARD disk had exceeded what the BIOS at the time supported resulting in the 137 GB limit displayed in the BIOS.  This section of Western Digital shows that this problem is related to the operating system or BIOS supporting however, this should not prevent Windows to install correctly.

  I'm sure it's already done, as it was not a new BIOS since 2004, but guarantee the newest BIOS is installed.  Logical block address 48 bits, necessary for the larger disks (larger for the time) was released in 2003.  The 2004 related BIOS earlier than probably took supported LBA.  What is the current version of BIOS?

  What is the exact message that you get when you try to install Windows Millennium Edition?

• How can I get rid of "sos email stopped working on boot up.

  at the start I constantly get a message "sos messaging has stopped working" I don't know what it is or how to get rid of. I have used all available with my advanced system of care.  anti virus cleaner slim smart defrag 2, iorbit malware remover, spy bot search. older files and large complete systems check scans and scans, registry cleaners, I'm out of options and many require assistance

  Hello

  Welcome to the Microsoft Community Forums. We are happy to help you with any problem related to Windows.

  Description of the question, we understand that you wake up message "SOS messaging has stopped working" at startup.

  If you could answer a few questions that would help us resolve this problem:

  1. don't you make changes to the computer before the show?
  2. you use any software related SOS?

  3. you use SOS Online backup software?
   
  This pop up is probably due to left-over something you already had additional files installed on your computer.

  Here are some ways you can follow to resolve the problem:

   
  Method 1:
  Check if the problem persists in safe mode.
  Check out the link:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-in-safe-mode
  If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.
  http://support.Microsoft.com/kb/929135
  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"
  under more information to prepare the computer to start as usual after a repair.
   
  Method 2:
  If you use SOS Online backup software you can try uninstalling and reinstalling it and check if this may help:

  See the link below for the procedure:

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

   

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.
   
   
   
   
   
   
   
   
   

• Satellite A300D-11 t - can not get external Wlan Realtek 8187b at work

  Hello.

  I have the laptop A300D-11 t and I have a problem.

  The place I work is in a cellar. I have not any wi - fi there and I decided to buy a USB wireless, and a 5 m usb extension.
  I tried this on my colleague (not toshiba) laptop and it works. He has not worked for me.

  I realized later that the chipset of the usb stick wireless realtek 8187B, identical to my laptop.
  I think there must be a conflict between the two devices and their drivers.

  Even with build-in WiFi disabled, I can't yet do the wireless to work. Ideas, any help would be appreciated...

  Hello

  Have you checked if the external USB WLAN key has been recognized in the Device Manager?
  Please check this box.
  You can also disable the internal WLan card in Device Manager as well.
  The internal Wlan card is listed in the network adapters. Mark the Wlan card and ckicl to disable peripheral (sign with a crossed red circle).

  Please note; In many cases the software/driver must be installed before you plug the key into the USB port.
  See the installation instructions supplied with the WLAN key

• Can not get printer hp psc 750 to work with a new Dell dimension 8300

  Original title: the printer does not work

  I have a new Dell dimension 8300.  My printer is a former hp psc 750 printer scanner copier I can't print.  Can anyone help?

  Hello

  You should ask in the Forums of Windows answers corresponding to your version of Windows.

  Windows answers forums
  http://answers.Microsoft.com/en-us/Windows

  --------------------

  Check with HP Support, their drivers and documentation online and ask the HP
  forums for known problems.

  HP PSC 750 printer
  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=57769

  Drivers HP PSC 750
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=57769&

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ------------------------------

  It might be a problem with the computer as an OEM Dell provides support
  for Windows.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

• Can not get the graphic import settings to work

  Hello

  I try to import a graphic by reference to a set DPI (222). The following code example graphic design is important, but don't know the DPI setting. You can see what the problem is? A few notes:

  -J' wrote an equivalent FDK and everything worked well, the same exact way.

  -The GetImportDefaultParams() fills a table of about 45 members and GetPropIndex() retrieves the unique index, which suggests that the parties are working

  -After experimentation, I conclude that parms [index]. PropIdent is still not defined, that seems odd.

  Thank you.

  var doc is app. ActiveDoc;

  var tl = new TextLoc();

  TL.obj = doc. FirstSelectedGraphicInDoc;

  If (!) TL.obj.ObjectValid) tl.obj is doc. MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  TL.offset = 0;

  var parms = GetImportDefaultParams();

  index = GetPropIndex (parms, Constants.FS_GraphicDpi);

  parms [index]. TypedVal = 222;

  index = GetPropIndex (parms, Constants.FS_FitGraphicInSelectedRect);

  parms [index]. TypedVal = false;

  var returnParms = new PropVals();

  doc. Import (tl, "C:\\temp\\delete\\222_dpi.jpg", parms, returnParms);

  Hi Russ,

  What exactly is your problem, I don't think that its really the value NULL of PropIdent?

  So I guess that your problem is, dpi is not defined.

  If I change one of them * DefaultParams(), I use this function:

  function SetPropVal (prop, propval, params)

  {

  var i = GetPropIndex (params, prop);

  If (i<>

  Returns false;

  If (typeof (propval) is 'number')

  params [i].propVal.ival = propval;

  If (typeof (propval) is 'chain')

  params [i].propVal.sval = propval;

  Returns true;

  }

  First parameter is the value of constant, the second the value to set, and the third the * DefaultParams.

  Hope this helps

  Markus

• Can not get the Google domain name to work with Adobe-accommodation

  Hello world

  First of all - I am a novice in that kind of stuff so any help is much appreciated, while I watch through this. I am the owner of my domain through Google domains and I try to the host through the Adobe Business Catalyst with my custom domain name: outercoastseafood.com. I changed what I thought was the correct DNS settings in Google, but after waiting 48 hours there is still nothing available. Google settings are:

  

  I also have a Microsoft email account that uses this field which seems to work fine. I looked at the field on intoDNS and got these results: http://www.intodns.com/outercoastseafood.com

  Any help or ideas are appreciated!

  Thank you
  Erik

  Hello

  Please remove 1st two records and leave ns1, ns2 and ns3, wait a few hours and it should be good.

  unless this is done, use the url to access the site

  http://outercoastseafood.BusinessCatalyst.com/Admin/index.aspx

  Let me know if you have any question.

• BlackBerry smartphones can not get rid of the old email address

  Hello, I just got old storm my friend and I can't get rid of her email address! I try to create a new one and it is said that the PIN is already associated with another account. Do I need a new PIN? If so, how do I?

  Yes - by contacting your carrier... they control this system.

• I have a new mac air and can not get the bookmark to be deleted in Safari.

  I have a new mac air and can not get the bookmark to be deleted in Safari.  It has default Favorites - I don't want to see them--when I right click and select Remove - I get this error message.

  You are using Safari with bookmarks, history, and imported passwords of Firefox. To change your Favorites, you must first keep or delete data from Firefox.

  When I click on "do not keep" nothing happens.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Preferences/com.apple.Safari.plist

  A right click or Ctrl-click on the line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Quit the application runs. Move selected item to the office, leaving the window open. Restart the application and test. If there is no change, leave again and place the item you back where he was, crushing the that may have been created in its place. If not, remove the item you moved. If possible, restore from a backup prior to the problem.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• can not get the pass first stage of conversation! in Red Faction: Guerrilla

  He walks for a short period, he points to the sky (no airship appears) then there begin to walk around, while im stuck, only able to look around.

  Does anyone have a solution to this?

  Check your Games for Windows Live in the control panel and uninstall who said not "Redistributable". It has passed me this point and I can pass the level, however can not get any further.  This seems to be a game very buggy Windows.

  http://forums.steampowered.com/forums/showthread.php?t=1324709

• I can not get connected. I log in ID w/microsoft and takes me to a sales page.

  I signed originally as AuntiM4.  I forgot my password then click on "forgotten password".  Went to the email, obtained the temporary code.  Copied and pasted into the password space and still get "incorrect password".  This is what was sent to me.

  If I sign with my identifier Microsoft I takes me to a page with no. where to go but home sales or support.  I was still not able to connect to this program.

  information from the other thread:

  Title:

  I can not get connected. I log in ID w/microsoft and takes me to a sales page.

  thread Description:

  In addition, my Skype name is passed to AuntiM4 somehow live: rosysdtr so I really don't know what password has been used. There is no change.

  Hello Marilyn,.

  Welcome to the Microsoft community!

  You cannot access the AuntiM4, get the message incorrect password and when you try to connect with Microsoft ID, you are redirected to another page.

  The problem may occur if there is a malicious content or if the hosts file is damaged.

  1. the problem occur only when you access the AuntiM4?

  2 did you do changes on the computer before the show?

  To check if the problem is due to malicious content or corruption of the hosts file, I suggest you follow the mentioned steps:

  Method 1:

  See the site:

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2: Reset the Hosts file

   

  See the site:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

  Method 3: Scan the computer to remove all possible malicious content

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.