Can not install Windows 8, Installation failed.

Similar Questions

• can not install window xp sp2 on acer aspire 4736z

  I can't install Windows xp sp2 on acer aspire 4736z computer.

  Why would you install sp2? Install sp3. SP2 is no longer support for security updates.

  Service Pack 3 download

• Boot Camp can not install Windows because of the formatting?

  I have a 2012 MacBook Pro (500 GB to 8 GB memory storage) with the OS X 10.11.3. I try to install Windows 8 Pro (64-bit) using Boot Camp. When I restart my computer after creating the partition, I have two USB ins journal. They say Windows and the other says Boot EFI. When I click on the option of Windows, I am taken to a screen that says that there is no bootable disk and restart with an inserted. When I click on Boot EFI, I did get into the Windows partition and can start set up for installation, but when I get to the stage where it asks me to install Windows, none of the listed drives are able to have Windows installed. I have a list of 4 disks, all drive 0 and then partition 1,2,3,4 respectively. 4 is the one that is 46.6 GB (I created Windows to be 50 GB), so I guess it's that I need to be installed in. However, when I click on any of the partitions, this message appears: "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed to GPT disks. Windows cannot be installed to this disk. Hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu. "After talking with the Apple support (who told me it was a matter of putting in the form any and to talk to the Windows how do I reformat) and Windows support (who took the opportunity to remind me why I had stopped using them in the first place), I think I have a better idea of what it means , but I have no idea what to do about this. Anyone have an idea how I can fix?

  You have two choices.

  1. use GPT Fdisk to delete the MBR and continue boot EFI. Later, it is problematic when you install the drivers for the Apple hardware.

  2 use a USB2 flash drive and let BCA create setup of USB and partition your drive. No matter what Manual partitioning or manipulate the installer USB can cause problems.

• Can not install windows update to KB2656362 get the error code 880070490. Run fix, but it has not fixed the problem.

  Can not fix with fixit.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error. You can access and run this tool by reading this Knowledge Base article on the Microsoft Web site.

  If the system update readiness tool solves the problem, you will need repair Windows.

  Of course a repair installation will not solve the problem if it is due to an infection of virus/malware etc.

• Rebuild (OS disk) drives can re - install Windows after installation of Linux?

  Hi folks,.

  Question: Can the disks to rebuild (OS + pilots) Re-install Windows, after a Linux installation?

  Goal: The goal is to alternate between facilities of OS: Linux - and Windows - and Linux - etc.

  Thanks again, good people.

  Of

  a valued customer

  You have more question?

  If you do not, please click to accept as a Solution to close this case.

  Tank You

  Cristian

• Can not install Windows manually

  Hello!

  Recently I received my laptop Inspiron 7520 of provider, it was the power outage before but now they changed the motherboard, as well as the machine, I received the Windows product key, unfortunately I lost my recovery media, I tried to install Windows 8 and Windows language unique to DVD but when I enter the product key a message this product key does not match for images available for installation Windows. Image that will work for my laptop please suggest me. This is the title of W8H 32/64 BIT DPK SVC product key

  Its possible that you can use a product key generic to install and activate then with this key but its strange that Dell would give you a replacement product key and filtering of spare not at the same time?

• Can not install Windows on Portege M200

  Hello
  I bought a Portege M200 opportunity. I discovered that the HARD drive was broken, so I bought a new one, plus a (160 GB)
  I know the problems Porteges can do when triing to install the OS on them, so I used this tutorial for installation of the network:
  [http://blog.ryantadams.com/2008/02/01/how-to-boot-from-the-network-pxe-boot-with-tftp-and-windows-pe/ | http://blog.ryantadams.com/2008/02/01/how-to-boot-from-the-network-pxe-boot-with-tftp-and-windows-pe/]

  everything worked well. then, my xp installation 'button' was grey, so I went with this tutorial:
  http://blog.ryantadams.com/2008/07/30/option-to-install-Windows-is-grayed-out-when-running-network-install/

  that worked well, too. The installer kopies some files and the desire to do a restart. So he brought me to Windows PE, I typed 'wpeutil reboot' as described in the second tutorial. My PC has started again and then nothing happens.
  I chossed "boot from HDD" and all I can see is a black screen with a small flashing underscore white top.

  IT IS REALLY FRUSTRATING. I also tried another method, for example the back of things (like I got [my R100 to work | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=120473]), with the same result.

  Thanks a lot for your help!

  You have a smaller HARD drive you can try?

  The M200 may be limited to 120 GB HDD due to the LBA48 137 GB limit. More info here: http://www.48bitlba.com/

  Ultimately, you must use the original Toshiba Portege M200 recovery disk to reinstall Windows. You can order from Toshiba https://backupmedia.toshiba.eu/landing.aspx

• Can not install windows KB973917 update and getting error code 8000FFF

  I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

  A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

• Changed HARD drive and now I can not install windows 7

  I bought a new HARD drive and interlaced old, now I am trying to install windows 7 home Premium and I get an error: "Windows Setup cannot configure Windows to run on this hardware of computers.

  See if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Copy the files to a flash usb without all the folders drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• can not install Windows 10

  Any attempt window 10 installation I get a message: remove Symantec EndPoint Protection and continue. I searched my laptop and find no evidence of EndPoint Protection. In desperation I removed my Norton Security Suite - which made no difference.

  I am running Windows 7 Premium and try to upgrade using the Windows site.

  Did you use the Symantec removal tool?  Product Symantec are notoriously difficult to remove

  Symantec is a common cause of BSOD.

  
  
  
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• Can not install Windows 8.1 store as it fails with the error message "fails to install.

  Original title: Surface Pro Windows 8.1 update slice pro

  Hey guys can someone answer my question:

  I have update problems to Windows 8.1 pro it say fails to install I am downloading form the app store of windows 8?

  Someone know the answer

  Hey sorry for not responding for a while. I found the problem, it was the language and the country usa.  It was changed to nz and the update worked.

• I can not install Windows Defender 64

  I want Windows Defender on my computer. I went to the site of Defender and downloaded the X 64 version. My system is a 64-bit system. When I tried to install it I got an error message "you need not to install this software, because Windows Defender is included in Windows Vista. You can access Windows Defender from the Security section of the Windows Control Panel. "The problem with this is that there is no section No. security listed in my control panel. This computer has never had Vista installed on it! What should I do now?

  You should only use an antivirus programs, using several programs at the same time will cause problems.

  By default, Windows already has Defender it contains, and where, let's say that you install MS security essentials, security essentials disables Defender.

  My advice would be to use MS security essentials and use only malware cleaner so essential to security cannot cure a problem.

  If you do not pick up a virus and security essentials cannot heal, I suggest to use this program:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Cannot install Lightroom 6, had a disc for Christmas and I can not install once the installation starts, it stops at 1-2%

  first he said I was on vista but I run windows 7 after fixing that via guides found on this forum, I went to install again and he just used to do it stops at 1-2% each time, ive tried to download the installer and don't use only not the disk, the same question. turned off the firewall and a load more things I found online that did not help. I am out of ideas now if you please any suggestions would be great.

  Did you try mentioned to make older programs in this version of Windows - Windows help?

• having the 1935 error code and can not install windows vista from my recovery disc

  I have a recurring error when trying to install all programs (Error 1935).

  and have reinstalled windows using my vista full 23 bits and when installing any program, even a basic program I get the error code 1935. I have a recovery disk, but I don't know how to start to charge and use the recovery disc supplied with my PC
  can someone help please because I am a beginner

  Thank you very much
  Dave

  Each manufacturer is different things about the recovery partition.  You need to contact the computer manufacturer (online - they can publish procedures - or by telephone) for instructions on how to use the recovery disk (there are probably a combination of special keys at boot that activates the process).  Keep in mind that this type of resettlement will completely eliminate your primary system partition, so don't forget to backup your important data until you try it.

  Here is an article on the 1935 error and solution to fix it.  Maybe this will help (he has a little advanced, but so is the problem then do your best to fight the operating instructions).  http://blogs.msdn.com/astebner/archive/2004/11/10/255346.aspx.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• HP ProLiant DL380 G4 can not install Windows 2003 x 64 error «...» CPU is not compatible with x 64 mode... »

  I try to install a Win2003 64 bit VM on ESXi 4 but get the error that x 64 processor not supported. The server has Intel E7520 Chipset and Xeon 2 x 64-bit clocked at 3.6 GHz processors. It should be possible to run virtual machines with Win2003 x 64, right? Anyone know what I'm doing wrong?

  Thanks for any help.

  While ESXi 4 will install, DL380 G4 platform is not supported.  This generation of processor (Xeon 51xx) taken supported operating systems for 64-bit, but there is no VT extensions.  It's why he can't support 64-bit clients.