Can not pass traffic from the VPN client to remote VPN site to site
Hello
I can't get the traffic flowing between my VPN clients and my remote site-to-site VPN, I did step by step in this link:
my firewall says that the package is abandoned by statefull inspection.
But this should be the command "same-security-traffic..." "this problem must be resolved
% ASA-6-302020: built ICMP incoming connections for faddr gaddr laddr (nworks) 10.48.100.2/0 10.48.100.2/0 10.45.231.163/1
% ASA-6-302020: built outgoing ICMP connection for faddr gaddr laddr 10.45.231.163/1 10.45.231.163/1 10.48.100.2/0
% ASA-6-302021: disassembly ICMP connection for faddr gaddr laddr (nworks) 10.48.100.2/0 10.48.100.2/0 10.45.231.163/1
% ASA-6-302021: disassembly ICMP connection for faddr gaddr laddr 10.45.231.163/1 10.45.231.163/1 10.48.100.2/0
Is it all what you might think that I'm missing?
Best regards
Erik
Erik,
Please check it out because no decaps means the ASA does not what it is the other side of the tunnel.
If you send traffic and you will see the crypt increment... but nothing in return... 99% sure that the problem is at the other end.
Federico.
Tags: Cisco Security
Similar Questions
-
Impossible to pass traffic through the VPN tunnel
I have an ASA 5505 9.1 running. I have the VPN tunnel connection, but I am not able to pass traffic. through the tunnel. Ping through the internet works fine.
Here is my config
LN-BLF-ASA5505 > en
Password: *.
ASA5505-BLF-LN # sho run
: Saved
:
: Serial number: JMX1216Z0SM
: Material: ASA5505, 256 MB RAM, 500 MHz Geode Processor
:
ASA 5,0000 Version 21
!
LN-BLF-ASA5505 hostname
domain lopeznegrete.com
activate the password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.116.254 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP 50.201.218.69 255.255.255.224
OSPF cost 10
!
boot system Disk0: / asa915-21 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain lopeznegrete.com
network obj_any object
subnet 0.0.0.0 0.0.0.0
the LNC_Local_TX_Nets object-group network
Description of internal networks Negrete Lopez (Texas)
object-network 192.168.1.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
object-network 192.168.3.0 255.255.255.0
object-network 192.168.4.0 255.255.255.0
object-network 192.168.5.0 255.255.255.0
object-network 192.168.51.0 255.255.255.0
object-network 192.168.55.0 255.255.255.0
object-network 192.168.52.0 255.255.255.0
object-network 192.168.20.0 255.255.255.0
object-network 192.168.56.0 255.255.255.0
object-network 192.168.59.0 255.255.255.0
object-network 10.111.14.0 255.255.255.0
object-network 10.111.19.0 255.255.255.0
the LNC_Blueleaf_Nets object-group network
object-network 192.168.116.0 255.255.255.0
access outside the permitted scope icmp any4 any4 list
extended outdoor access allowed icmp a whole list
outside_1_cryptomap list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
inside_nat0_outbound list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
LNC_BLF_HOU_VPN list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 741.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
outside access-group in external interface
!
router ospf 1
255.255.255.255 network 192.168.116.254 area 0
Journal-adj-changes
default-information originate always
!
Route outside 0.0.0.0 0.0.0.0 50.201.218.94 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 192.168.2.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 50.201.218.93
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
no use of validation
Configure CRL
trustpool crypto ca policy
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
crypto isakmp identity address
Crypto isakmp nat-traversal 1500
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access insidea basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
username
username
tunnel-group 50.201.218.93 type ipsec-l2l
IPSec-attributes tunnel-group 50.201.218.93
IKEv1 pre-shared-key *.
NOCHECK Peer-id-validate
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:e519f212867755f697101394f40d9ed7
: end
LN-BLF-ASA5505 #.Assuming that you have an active IPSEC security association (i.e. "show crypto ipsec his" shows the tunnel is up), please perform a packet trace to see why it's a failure:
packet-tracer input inside tcp 192.168.116.1 1025 192.168.1.1 80 detail
(simulating a hypothetical customer of blue LNC tries to navigate to a hypothetical LNC TX Local site server)
-
Can not download apps from the App Catalog
The screen is broken on my pre, so I bought a used meadow of Craigslist. I entered my info in Palm profile and there loading all my contacts, but he has been unable to download one of my installed applications. Not much, I've never really used most of them anyway so I just removed all. I wanted to download a select few that I use (Facebook, etc), but when you try to download from the App Catalog I get the message "failed download. I get the message for all the applications that I'm trying to download. There is no other just error message "download failed". This has happened for 24 hours now, hoping someone here can give me a solution.
I'm on the Bell Canada network, and I've never had a problem installing apps with my old pre.
Thanks in advance.
There are several clients who report problems regarding not being able to download apps on the Bell network.
We are currently investigating the issue to identify the root cause and do the analysis.
Currently as it sits now we noticed that the download above EV network runs out of Bell, but downloading via a wireless network works. At this stage with the prior information he don't currently seems to be a problem of the App Catalog.
-
Equium A100-147: can not play videos from the site with WMP
When I try to play videos from a Web site, I get an error message. "Windows Media Player received. Error message Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »
ERROR CODE DOOD11D2My computer settings are set out at the time of purchase. Is this normal?
Hello
I think the error messages says that everything you need to know:
You can not read the file because:-Is the file may be in use
-you won't have access to the computer where the file is stored
-your proxy settings are may not be not correctThe proxy settings must be defined on use web browser proxy settings, you can find the setting when you open the WMP and tab marks the Protocol HTTP and meadows configure network.
-
BlackBerry smartphones can not make calls from the home page or the phone book.
I've had my curve for several months now and the other day, that my most young got a hold of it... I don't know how they do it, but my children can do things with my phone and computers that I did not know they could do... In any case I tried to access my voicemail by organizing the 1 on the homepage and it took me to instead call log, so I tried to make a call from the phone book by selecting the name pressing on do it call button and no as soon as I actually had to go into the call log and manually type the number.
My question is... What did do? It is very aggravating and I would ask him, but he is two... I know he did not drop it or I would take it to a service provider. All of the suggestions.
Thank you
If you go in your call log icon or by phone, click your menu button and go to Options. Then, go to the General Options. See if your the home screen dial is set to Yes.
Also try to reset your device by removing the battery for 1 minute and replacig it to leave the unit restarts. Try it later
-
Can not pass traffic with label of vmware virtual switch fabric 10 GB
Hello
I need to understand how to move traffic labeled VMware VST to these virtual Fabric switch. Blades IBM HS22 connecting internally to the virtual switch between ports 1 to 14. I use 2 external ports (17-18), one connects to the Netgear switch and another to the other switch to virtual fabric. Did the same on the other virtual fabric switch. My Synology rackstation is configured with LUN iscsi that connect to the Netgear switch and I would like to connect my HS 22 rackstation blades. My main concern is that I can't ping the IP of netgear on the same interface vlan. I can ping my Synology diskstation to the netgear which are in the same vlan. NETGEAR and BNT switches are connected by cables DAC SFP +.
Even VLAN is also configured on Netgear switch. The default pvid is set as 1 on all interfaces, can I disable this? Do I need to use tagpvid-penetration on all interfaces.
SH run
Current configuration:
!
version "7.8.7.
switch type "IBM Networking OS virtual fabric 10 Gb Switch Module for IBM BladeCenter"
iscli-new
!
timezone system 295
! Europe/Denmark
Advanced System
!SNMP-name of the server "BNT01".
!
hostname "BNT01".
!
!
enable access userbbi
!
INT1 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT2 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT3 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT4 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT5 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT6 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT7 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!INT8 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT9 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT10 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT11 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!INT12 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
INT13 interface port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
interface INT14 port
switchport trunk allowed vlan 1, 16-50, 3998-4000, 4095
output
!
EXT1 interface port
switchport mode trunk
switchport trunk allowed vlan 1, 16-50, 3998-4000
output
!
EXT2 interface port
switchport mode trunk
switchport trunk allowed vlan 1, 16-50, 3998-4000
output
!!
VLAN 1
the name "Default".
!
VLAN 16
name "VLAN16".
!
VLAN 17
name "VLAN17".
!
VLAN 18
name "VLAN18".
!
VLAN 19
name "VLAN19".
!
VLAN 20
name "VLAN20.
!.
.
.
.
.
.
..
VLAN 46
name "VLAN46".
!
VLAN 47
name "VLAN47".
!
VLAN 48
name "VLAN48".
!
VLAN 49
name "VLAN49".
!
VLAN 50
name "VLAN50".
!
VLAN 3998
name "iscsi".
!
VLAN 3999
name "vmotion".
!
VLAN 4000
name "mgmt".
!
!
!
spanning tree mst configuration
lethosting-name "region1".
revision 2
output
!
spanning tree mst mode
!
spanning tree mst configuration
example of 1 vlan 16-50
instance 2 vlan 3997,4000
example 3 vlan 3998-3999
outputThe configuration is for Teddy. I donno what I'm missing here? Any ideas would be very appreciated.
Yes. Finally managed to do work. Tagged traffic now connects blades with ESXI 5.5 U2 to the Synology rackstation.
It was the same thing we had. ESXi 6.0 is not supported by this adapter emulex. Also ESXi 5.5 does not I think with the iSCSI driver. So I have updated drivers using esxcli.
VMware
Updated network driver
/ tmp # software esxcli vib install v - /tmp/elxnet-10.0.575.9-1OEM.550.0.0.1331820.x86_64.vib
Result of the installation
Message: The update completed successfully, but the system must be restarted for the changes to be effective.
Restart required: true
VIBs installed: Emulex_bootbank_elxnet_10.0.575.9 - 1OEM.550.0.0.1331820
VIBs removed: VMware_bootbank_elxnet_10.0.100.0v - 1vmw.550.0.0.1331820
VIBs ignored:ISCSI driver update
/ tmp # software esxcli vib install v - /tmp/scsi-be2iscsi-4.6.261.0-1OEM.550.0.0.1198611.x86_64.vib
Result of the installation
Message: The update completed successfully, but the system must be restarted for the changes to be effective.
Restart required: true
VIBs installed: Emulex_bootbank_scsi - be2iscsi_4.6.261.0 - 1OEM.550.0.0.1198611
VIBs deleted:
VIBs ignored:
/ tmp # software esxcli vib install v - /tmp/ima-be2iscsi-4.6.261.0-1OEM.550.0.0.1198611.i386.vib
Result of the installation
Message: The update completed successfully, but the system must be restarted for the changes to be effective.
Restart required: true
VIBs installed: Emulex_bootbank_ima - be2iscsi_4.6.261.0 - 1OEM.550.0.0.1198611
VIBs deleted:
VIBs ignored:esxcli system set to true EI maintenanceMode
esxcli system shutdown reboot - r = driverupdate d = 10After that, I created iSCSI vmkernel ports with the grouping. Ping has started working and now I can connect to the storage
-
Why can not download apps from the US store?
I live in Costa Rica and my apple ID that was created here. I would like to download applications from the iTunes store to US, but it won't allow me with the apple ID I have. What is the best way to get around this? I can create a second Apple ID it's just for the US store? Can I attach more than one identifier apple for all my devices?
You cannot use other country iTunes stores.
In order to use iTunes store of any country, you must be physically located within the borders of this country.
-
Problem passing traffic through the VPN tunnel
With well over 150 VPN lan-to-lan tunnels configured, I can usually get tunnels upward. However, this one is stumping me, unless the ISP is to give false information. Using a router Cisco 871 on-site a Cisco 3005 concentrator in my data center, I have set up my tunnel. The tunnel will go up but won't traffic. I am sure that the configurations on both devices are correct because I use a lot of "cut-and - paste." So, the only question seems to be the modem/router provided by your ISP. Usually, when this happens, the problem is with NAT enabled on their equipment. According to them, that it is not enabled on their NAT router. Where can else I check? Any ideas?
Check access lists and a static route
Try these links: >
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_tech_note09186a00800949c5.shtml
-
Can not import addresses from the old computer
I can't import addresses my old computer to the new Thunderbird. The import function simply stops. I waited for her several times, tried twice, abandoned.
What you are trying to import from?
Users from a different mail program generally target functions of import in Thunderbird.
If you move Thunderbird from one computer to another, the best way is to copy the profile to the new computer.
-
Can not install applications from the App Store
I am in Bangladesh and has recently bought an iphone 6. After you have configured the phone, when I tried to install an app on the App Store, he wanted me to enter/verify my payment information, it took me to the settings where I first had to choose my country, but my country is not listed. So I chose the closest of the India, but then I had to put an address, details of credit card that would not match with mine cause, I chose the country as the India. Now, whenever I try to install an app (free) it takes me to the account settings page to check my payment information. What can I do?
Try entering an iTunes gift card - should allow you the credit, you must download the free apps and buying new ones until the money runs out
-
I try to download, a window appears showing AVG scans emails and the line on the bottom left says download 1 x messages, and again, nothing happens. When I go to the server and open web mail, the messages are here and can be read, but will not download to the desktop.
Don't let not AVG scan your Thunderbird profiles folder.
-
I can't import video camcorder do a lask of the firewall port imput. Reserched replacement cable IEEE 1394 with a USB one and found it won't work for video. I tried a dvc 100, but the video editing progrm isn't pinnicle. How can I load the video into the computer, or can I charge my current camera videos? He uses the digital band map memeory for photos only.
You kind of mutilated the terms, but if the camcorder needs a firewire IEEE 1394, your PC cable card cannot accommodate a. There may be some devices that claim to USB conversions, but normally, they will not work with a camcorder. It seems that another PC is going to be necessary or another camera.
-
If you are unsure which model of phone is the following, it is the same one that Zte Monte-Carlo in UK. He say that my device is not compatible with it.
ZTE Skate has an ARMv6 CPU. Firefox doesn't currently work on ARMv7. There is the release of Firefox for ARMv6 phones work, but there is no ETA on this project yet.
-
The error message "printer is off-line" showed a day all of a sudden
I tried to download the driver of scanning and printing doctor as suggested help forum, never downloaded.
The download (or Install) window presented with percentage bar.
but the percentage remains at 0% for 10 minutes.
I thought that something was wrong with the Scan Doctor
I decided to take the alternative; uninstall the current printer driver in my computer (computer laptop HP 'Pavilion', Windows8).
I uninstalled it then tried to download the same driver on the HP site.
It is same as the pilot of scanning and printing doctor;
same window, "0% download" forever.
Now, I'm totally at a loss. Have what wrong I done? How can I make my printer work again or how do I know what is the problem?
The driver is big enough, I would say save to disk, and then run the installation program. You could do a right click on the link here, select "Save as", then download the file. Depending on your internet speed, it make take some time downloading. If it doesn't for you please specify exactly what is happening when you try to download the file, and any error messages see you.
-
BlackBerry smartphones can not get contacts from the Sim Card.
I just bought a Blackberry Bold 9780 and put my current sim card in it to copy my contacts in. However, this is not the case - that one or two contacts copied when all of my contacts have been permanently recorded on the sim card. My Blackberry bolt ons have not yet been activated (not sure if this is relevant). Would appreciate any help, thank you.
Open your address book > press Menu > SIM Phone Book > press the Menu key again > copy everything to the address book
Maybe you are looking for
-
In this webpage (example): http://Athena.unige.ch/Athena/citations/Cholokhov.htmltext-align-justify is quite correct note (see the second paragraph of the English and French texts). Why?...It is OK with IE and other browsers.
-
Need drivers XP for Satellite A100-784
Hello When I bought it was insalled windows vista.for some reason, I prefer windows xp. so I formatted my laptop, insalled sucesfully xp operating system but there are no drivers. When I asked the seller why my laptop doesen't have driver CD for his
-
Already purchased music does not give me the option to download
Bought the songs awhile back, they may not appear in the history of my purchase, but when I search on the itunes store, it says 'buy' and does not give me the option to download. I bought like 350 songs and now I can only download 150 of them, only,
-
I just bought a new 8470p WIN764, but it came without a user manual. I downloaded the HP site the reference guide for HP laptop, but it is generic and not specific to the p 8470. For example, I can't tell which USB ports are USB3.0. Help please Thank
-
Nodes property RT for Typedefs
I add a new feature to an application of the CR for which I would like to maintain scalability and flexibility by using a type of cluster definition. The cluster will represent the channels to use for a particular modular Subvi. I will reference this