Can not pass traffic with label of vmware virtual switch fabric 10 GB

Similar Questions

• Can not pass traffic from the VPN client to remote VPN site to site

  Hello

  I can't get the traffic flowing between my VPN clients and my remote site-to-site VPN, I did step by step in this link:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

  my firewall says that the package is abandoned by statefull inspection.

  But this should be the command "same-security-traffic..." "this problem must be resolved

  % ASA-6-302020: built ICMP incoming connections for faddr gaddr laddr (nworks) 10.48.100.2/0 10.48.100.2/0 10.45.231.163/1

  % ASA-6-302020: built outgoing ICMP connection for faddr gaddr laddr 10.45.231.163/1 10.45.231.163/1 10.48.100.2/0

  % ASA-6-302021: disassembly ICMP connection for faddr gaddr laddr (nworks) 10.48.100.2/0 10.48.100.2/0 10.45.231.163/1

  % ASA-6-302021: disassembly ICMP connection for faddr gaddr laddr 10.45.231.163/1 10.45.231.163/1 10.48.100.2/0

  Is it all what you might think that I'm missing?

  Best regards

  Erik

  Erik,

  Please check it out because no decaps means the ASA does not what it is the other side of the tunnel.

  If you send traffic and you will see the crypt increment... but nothing in return... 99% sure that the problem is at the other end.

  Federico.

• Site to site VPN upward but not pass traffic (ASA 5505 8.3.1 and 9.2.3 version)

  Hello

  I'll put up a tunnel vpn site-to-site between two locations.  Both have cisco ASA 5505 running a different version, I'll explain in more detail below.  so far, I was able to get the tunnel to come but I can't seem to pass traffic, I work at this for days now and have not been able to understand why he will not pass traffic.  Needless to say that the customer's PO would be on the fact that their VPN is not upward and they had to do by hand.  I'll put the configs below, if possible can someone help me as soon as POSSIBLE, I really want to get this site up and running so that we do not lose the customer.

  An IP address of 0.0.0.0 = site
  Site B IP = 1.1.1.1

  A Version of the site = 8.3.1
  Version of the site B = 9.2.3

  __________________________

  _________

  A RACE OF THE SITE CONFIGURATION

  Output of the command: "sh run".

  : Saved
  :
  ASA Version 8.3 (1)
  !
  hostname SDMCLNASA01
  SDMCLNASA01 domain name. LOCAL
  Select 5E8js/Fs7qxjxWdp of encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  the IP 192.168.0.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  the IP 0.0.0.0 255.255.255.252
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT
  DNS lookup field inside
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  SDMCLNASA01 domain name. LOCAL
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  network of the NETWORK_OBJ_192.168.0.0_24 object
  192.168.0.0 subnet 255.255.255.0
  network of the NETWORK_OBJ_192.168.1.0_24 object
  subnet 192.168.1.0 255.255.255.0
  network lan_internal object
  192.168.0.0 subnet 255.255.255.0
  purpose of the smtp network
  Home 192.168.0.245
  Network http object
  Home 192.168.0.245
  rdp network object
  Home 192.168.0.245
  network ssl object
  Home 192.168.0.245
  network camera_1 object
  host 192.168.0.13
  network camerahttp object
  host 192.168.0.13
  service object 8081
  source eq 8081 destination eq 8081 tcp service
  Dvr description
  network camera-http object
  host 192.168.0.13
  network dvr-http object
  host 192.168.0.13
  network dvr-mediaport object
  host 192.168.0.13
  object-group Protocol DM_INLINE_PROTOCOL_1
  object-protocol udp
  object-tcp protocol
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  DM_INLINE_TCP_1 tcp service object-group
  EQ port 3389 object
  port-object eq www
  EQ object of the https port
  EQ smtp port object
  DM_INLINE_TCP_2 tcp service object-group
  port-object eq 34567
  port-object eq 34599
  EQ port 8081 object
  permit access ip 192.168.0.0 scope list outside_1_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0
  outside_access_in list extended access permit tcp any any eq smtp
  outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
  outside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group
  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any inside
  ICMP allow all outside
  don't allow no asdm history
  ARP timeout 14400
  NAT (inside, outside) static static source NETWORK_OBJ_192.168.1.0_24 destination NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.1.0_24
  NAT (exterior, Interior) static static source NETWORK_OBJ_192.168.0.0_24 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.0.0_24
  !

  
  network lan_internal object
  NAT dynamic interface (indoor, outdoor)
  purpose of the smtp network
  NAT (all, outside) interface static tcp smtp smtp service
  Network http object
  NAT (all, outside) interface static tcp www www service
  rdp network object
  NAT (all, outside) interface static service tcp 3389 3389
  network ssl object
  NAT (all, outside) interface static tcp https https service
  network dvr-http object
  NAT (all, outside) interface static 8081 8081 tcp service
  network dvr-mediaport object
  NAT (all, outside) interface static 34567 34567 tcp service
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 71.42.194.209 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  http server enable 8080
  http 192.168.0.0 255.255.255.0 inside
  http 192.168.1.0 255.255.255.0 inside
  http 192.168.1.0 255.255.255.0 outside
  http 71.40.221.136 255.255.255.252 inside
  http 71.40.221.136 255.255.255.252 outside
  http 192.168.0.0 255.255.255.0 outside
  http 97.79.197.42 255.255.255.255 inside
  http 97.79.197.42 255.255.255.255 outside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto outside_map 1 match address outside_1_cryptomap
  card crypto outside_map 1 set peer 1.1.1.1
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  outside_map interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  dhcpd address 192.168.0.50 - 192.168.0.150 inside
  dhcpd dns 192.168.0.245 209.18.47.62 interface inside
  dhcpd SDMCLNASA01 field. LOCAL inside interface
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  attributes of Group Policy DfltGrpPolicy
  Protocol-tunnel-VPN IPSec l2tp ipsec
  tunnel-group 1.1.1.1 type ipsec-l2l
  tunnel-group 1.1.1.1 ipsec-attributes
  pre-shared key *.
  !
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  !
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:462428c25e9748896e98863f2d8aeee7
  : end

  ________________________________

  SITE B RUNNING CONFIG

  Output of the command: "sh run".

  : Saved
  :
  : Serial number: JMX1635Z1BV
  : Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor
  :
  ASA Version 9.2 (3)
  !
  ciscoasa hostname
  activate qddbwnZVxqYXToV9 encrypted password
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 1.1.1.1 255.255.255.252
  !
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  network camera_http object
  host 192.168.1.13
  network camera_media object
  host 192.168.1.13
  network of the NETWORK_OBJ_192.168.0.0_24 object
  192.168.0.0 subnet 255.255.255.0
  network of the NETWORK_OBJ_192.168.1.0_24 object
  subnet 192.168.1.0 255.255.255.0
  outside_access_in list extended access permit tcp any any eq 9000
  outside_access_in list extended access permit tcp any any eq www
  outside_access_in list extended access permit icmp any one
  outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object NETWORK_OBJ_192.168.0.0_24
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any inside
  ICMP allow all outside
  ASDM image disk0: / asdm - 732.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static static source NETWORK_OBJ_192.168.0.0_24 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.0.0_24
  NAT (exterior, Interior) static static source NETWORK_OBJ_192.168.1.0_24 destination NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.1.0_24
  !
  network camera_http object
  NAT (all, outside) interface static tcp www www service
  network camera_media object
  NAT (all, outside) interface static 9000 9000 tcp service
  !
  NAT source auto after (indoor, outdoor) dynamic one interface
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 71.40.221.137 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_cryptomap
  card crypto outside_map 1 peer set 0.0.0.0
  card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
  outside_map interface card crypto outside
  trustpool crypto ca policy
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev1 allow outside
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0

  dhcpd address 192.168.1.50 - 192.168.1.150 inside
  dhcpd dns 192.168.0.245 209.18.47.61 interface inside
  dhcpd SDPHARR field. LOCAL inside interface
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  AnyConnect essentials
  attributes of Group Policy DfltGrpPolicy
  Ikev1 VPN-tunnel-Protocol
  internal GroupPolicy_0.0.0.0 group strategy
  attributes of Group Policy GroupPolicy_0.0.0.0
  VPN-tunnel-Protocol ikev1, ikev2
  tunnel-group 0.0.0.0 type ipsec-l2l
  tunnel-group 0.0.0.0 ipsec-attributes
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  pre-shared-key authentication local IKEv2 *.
  !
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  !
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:19031ab1e3bae21d7cc8319fb7ecf0eb
  : end

  Sorry my mistake.

  Delete this if it's still there

  card crypto external_map 1 the value reverse-road

  Add this to both sides

  card crypto outside_map 1 the value reverse-road

  Sorry about that.

  Mike

• Why I can not contact you with FEEDBACK REAL

  Why I can not contact you with FEEDBACK REAL? Why Firefox to 28 allows me to download files from Web page complete, but worms 30 does not work? Plugins, Addons, Internet Security are the same on both systems. I can download the files in IE but not Firefox. What gives? I use NoScript, Better Privacy, Ghostery, and Kaspersky Internet Security configured the same on both systems. The only reason I checked is because on some sites, I can't download files and point of view completely. 30 to Firefox will download but not to create a complete directory html link so that I can open and view the file.

  Hi obliviondoll, the feedback site is here:

  https://input.Mozilla.org/feedback

  This is the page that opens if you use the Help menu in Firefox and choose to submit your comments...

  You can provide your e-mail address on the site of feedback where people reviewing the feedback have questions, but I think that it is rare that you would be so don't expect a response.

  In addition, I don't know if you scrolled down beyond the map on the contact page, but there are links down here (see the attached screenshot):

  https://www.Mozilla.org/contact/spaces/

• Once I downloaded the new version of Adobe Flash Player 11.3.300.262, I can not play games with my friends on Yahoo Messenger.

  It could be a coincidence, but when I upgraded to the latest version of Adobe Flash Player 11.3.300.262 I can not play games with my friends on Yahoo Messenger. I know that when I've updated for a reason that I had to try 3 times before it took. It shows that it is updated. I wonder if I have to uninstall and reinstall. Also, I never use Internet Explorer 8 but when I went there to check I found a plug check link there and it showed over there that Adobe Flash Player necessary update but it was an older version and not a Foxfire had updated me too. Now I'm really confused if it causes a problem. I've never had to control Internet Explorer for plug-ins before. Have always just updated to Foxfire since that's what I use. Adobe Flash Player seems to play videos OK not really sure if this is the issue or not. My Java plug-ins have been very well and have been updated some time there, so I know it's not that. Any help is appreciated. Thank you!

  Hey again,
  After hours of reading and checking to make sure I had good things enabled, I did, I gave up and uninstalled the latest version of Adobe Flash Player, they gave me and re-installed and later I had my friend get on Messenger and we tried games and it worked this time.
  For some strange reason when I updated it took me 3 tries before it took. So even if he told me that it has been installed, apparently it wasn't really. Just goes to show you that you can not trust what you see.
  What has really scratching my head was I went to Internet Explorer 8, which I never use more and discovered you can now get Mozilla plug in slip out there and when I did showed that same Adobe Flash Player is outdated but it was to a different version. Not knowing if it would help, I installed a new too and he said it was his understanding that it does not. So I guess you can have 1 version installed on the computer 1 despite 2 browsers different different versions. It becomes too complicated for me. Laughing out loud!
  I work with computers all the time at work but not the technical stuff. If it's something simple, I can guess through it to help someone but it's my first personal computer for me and is a former first, so I got experience using different types. We use the desk at work as well. Personally, I like computers laptops for various reasons. And the mention of people many browsers go way over my head.
  Please answer this question though and you answer back.
  DFelice

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• What happens in Windows Mail? I can not send attachments with any type of graph.

  Unreal

  What happens in Windows Mail? I can not send attachments with any type of graph. People receiving my email with attachments receive between 60 and 70 copies. I called my provider, my safety, send the computer for a week for a Tech and no one can answer this problem for me. If I don't get this problem resolved I will never use Microsofts again e-mail programs.

  Tools | Accounts | Mail | Properties | Advanced. Uncheck the box: "Break apart messages...". ».
  If this isn't the cause, try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• I have been using Dreamweaver CS6 on my old laptop broke. When I tried to load cs6 once again, the installer for adobe dreamweaver cc on my computer. I can not activate dreamweaver with my dreamweaver cs6 serial number. What should I do?

  I have been using Dreamweaver CS6 on my old laptop broke. When I tried to load cs6 once again, the installer for adobe dreamweaver cc on my computer. I can not activate dreamweaver with my dreamweaver cs6 serial number. What should I do?

  Uninstall it and then use the cleaning tool too.

  Adobe Creative Suite cleanup tool
  ---------------------------------

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  Then download the CS6 licensed software and install and activate with your serial number.

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

• I can not open files with PS Elements9 (Mac) NAVE and conducted just every success. updates

  I can not open files with PS Elements9 (Mac) NAVE and conducted just every success. updates.  What should do?

  For the D600 NAVE, you have two options:

  (1) upgrade to PES 11. (2) DOWNLOAD and install the free Adobe DNG converter to convert your raw files to the universal Raw format files and Adobe will open in all versions of PSE (keep your originals as backups and for uses in the software of the camera factory)

  Windows download Click DNG Converter 7.3

  Mac download click DNG Converter 7.3

  You can convert an entire folder of images raw with a single click. See this quick video tutorial:

  You Tube click here for the DNG Converter tutorial

• I downloaded a few movies with firefox, now they are stuck in a section of load down and they don't play and I can not pass them anywhere to burn to a disc that I can do?

  I downloaded a few movies and they went to download some file in fire fox and now I can not play them or move to another file were I can play or burn them. What can I do to fix this?

  Are the files still physically on the hard drive?

  You can check that in the window of download via the context menu Manager.

  • https://support.Mozilla.org/KB/downloads+window

  If open the containing folder and then dimmed Open files have been removed and are no longer present in the original download location.

• SDK can not connect to the Simulator in VMware

  My operating system: Windows 7 64-bit

  SDK version: 10.0.9; Build id: v201212072306

  VMware Player Version: 5.0.1 build-894247

  Video card: NVIDIA GTX 560 Ti

  I'm trying to use the simulator of 10 BlackBerry, running in VMware Player, to test applications under development in the native BlackBerry SDK. However, when I try to run these applications from the SDK and connect to the Simulator, I see that even though (I think) I got the correctly configured IP address for the target, it is still listed as "Not connected" in the list of Options of the target (I don't know if this is normal or not). Then, if I try to launch the project in any case, I get the following error message:

  "Unable to connect. Make sure USB cable or Wi - Fi is connected, the IP address is correct, and the mode of development. »

  Sorry if I didn't explain very clearly, this is very new to me, and I still have trouble getting my head around it. I'm sure there is probably some information that I forgot to include in this post, but I will provide if I think that whatever it is.

  I have been looking for solutions to the question, but it seems that there could be many possible causes, so I thought it would be better to make a new thread specifically for my situation. I tried the following:

  -Check that the development Mode has been activated (it seems that it has been enabled by default)

  -Ping I thought several times, was the IP address of the command line simulator (sometimes I had to meet with success, but not at the beginning)
  -Disabling Windows Firewall
  -Running a .bat file with 'ipconfig/release; ipconfig / renew. ipconfig/flushdns ".
  -I check the correct target for the Simulator IP address (double-check this confuses me a little, but I think I can find it in "Settings"-> "About" simulation-> 'Network' menu?)
  -Temporarily disable Avast! antivirus software to check if she is interfering
  -Verification of VMware Windows were running (I think he installed four of them in total)
  -Uninstall (then reboot) and reinstall the SDK, Simulator and VMware and restarting, repeatedly

  -Windows asked to troubleshoot the connection of VMnet8 of VMware; He said DHCP must be enabled, but then failed to do this for me (this left me confused; I wasn't sure if it was important or not)

  -Passage of the NAT VMware Bridged mode for the simulator mode, then the connectivity test (it doesn't seem to help, and the "About"-> page 'Network' in the simulation was empty), then power back up

  Any help or any what pointers to additional information, I would give, would be greatly appreciated. Thank you!

  EDIT: I also cant seem to get QML previews to work at all. I don't know if it is related to my other question, but I thought it might be worth mentioning, and this is something else I would try to fix, if possible. I tried to update my drivers, but to no avail.

  Solution found! I just tried to add a target in the software development kit using the IP address on 'Settings' of the Simulator-> "About"-> "Network" screen, but the target has been filtered out of the list, unless I unchecked "target filter based on the selection of C/C++ applications". If I unchecked, the target has been classified as ' 192.168.31.128 (Neutrino / x 86) ', but the Run button was grayed out when I chose it and I noticed the error message, ' binary Selected target do not match x 86 "at the top of the window." I have googled this error message and found the following (quite old) thread:

  http://supportforums.BlackBerry.com/T5/native-development/QNX-IDE-target-selected-binary-and-target-...

  After reading through and testing, it turns out that all I had to do was change the active configuration in the drop-down list at the top of the window SDK 'Device-Debug' for 'Simulator-Debug", little"hammer"that I needed to build to the Simulator and not a real physical BlackBerry device. Here is a quote from the post of cdamus, which is where I found the solution:

  "A little trick to streamline your workflow: prospects for development C/C++ has a little"hammer"toolbar of action that you can pull down (click on the black triangle next to it) to define and build the active configuration in one step, for one or several projects."  The icon to the right (it looks a bit like a sundial) defines the active configuration, but is not build. »

  I took a screenshot to help indicate the setting that I need to use:

  

  Hope this helps you chuma and anyone else who has this problem. Thanks for the tip, cdamus!

• Satellite Pro A100: Why can not connect Internet with the net card

  I can't connet Internet whith this net card, but I always connect it with a wireless network card

  Hello

  I put t know why you can not connect to the internet, but we need to study a little.
  Have you checked if the network card has been properly installed? The network adapter appears in Device Manager correctly?

  What do you use to connect to the internet; Modem or router WLAN?
  Have you checked the TCP/IP protocol if the IP address setting has been configured to automatically get?

  Check if there is an active firewall

  As you can see, there are a lot of restrictions and everything must be checked!

• can not paly DVD with digital copy, message: windows media security upgrade

  I recently put a dvd with a copy digital in. He talling keeps me to upgrade my windows media security. When I click on the link on the web page to upgrade nothing happens and I can not even download digital dvd. any ideas. brand

  Hello

  1. You use windows media player to play the DVD?
  2. What is the format of the video file you are trying to play?

  You can try the following methods:

  Method 1:

  You may be unable to read content protected after your computer hardware changes

  http://support.Microsoft.com/kb/891664

  Method 2:

  Windows Media Player error message help

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11D7&OriginalID=C00D2760

• new password can not pass password requiremensts has although uppercase, lowercase, # and 9 to 10 characters

  When I try to use Control Panel to change the password that I asked that the password does not pass needs even if the password contains ten characters long, upper and lower case, a # or a % and a number.  How can I get around this, please.

  If your computer is connected to a domain then you need to talk to your domain administrator.

  If it is not connected to a domain, then you must run the secpol.msc command and follow this path: security settings / account policies / password policy. Now change the settings according to your needs.