can not print when connected via the Explorer 9.0

Similar Questions

• InDesign extension is not displayed when run via the option "Debug as".

  InDesign extension is not displayed when run via the option "Debug as".

  Hi all

  I worked on an application InDesign Extension for a few months now. I am Member creative cloud. I FlashBuilder 4.6 + Extension Builder 2.1 (both licensed versions) and InDesign CS6 and CC installed on my machine. The application is targeted for InDesign CS 5.x and 6 CS and CC versions. So far, I've tested it via "run as" and "Debug as" options of the FB; and in time, I "export as" ZXP for internal versions.

  I'm having two problems, do not know if they are related.

  1. when I try to bundle manifest, it fails with the following error: (at first, I thought it was an installation problem, but I did another test project and bundle manifest works on that one)

  Could not open the Editor: an unexpected exception was thrown.

  Details:

  java.lang.NullPointerException

  at com.adobe.cside.ui.editors.pages.MainBundlePage.isPointProductSupported (unknown Source)

  at com.adobe.cside.ui.editors.pages.MainBundlePage.createTargetAppSection (unknown Source)

  at com.adobe.cside.ui.editors.pages.MainBundlePage.createFormContent (unknown Source)

  to org.eclipse.ui.forms.editor.FormPage$ 1.run(FormPage.java:152)

  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

  at org.eclipse.ui.forms.editor.FormPage.createPartControl(FormPage.java:150)

  at org.eclipse.ui.forms.editor.FormEditor.pageChange(FormEditor.java:471)

  at com.adobe.cside.ui.editors.BundleManifestEditor.pageChange (unknown Source)

  at org.eclipse.ui.part.MultiPageEditorPart.setActivePage(MultiPageEditorPart.java:1067)

  at org.eclipse.ui.forms.editor.FormEditor.setActivePage(FormEditor.java:603)

  at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:352)

  at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:670)

  at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)

  at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)

  at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:289)

  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2945)

  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2850)

  to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (WorkbenchPage.java:2842)

  to org.eclipse.ui.internal.WorkbenchPage$ 10.run(WorkbenchPage.java:2793)

  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2789)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2773)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2756)

  at com.adobe.cside.ui.popup.actions.CSIDEBundleEditorAction.run (unknown Source)

  at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)

  at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection (ActionContributionI tem.java:584)

  to org.eclipse.jface.action.ActionContributionItem.access$ 2 (ActionContributionItem.java:501)

  to org.eclipse.jface.action.ActionContributionItem$ 5.handleEvent (ActionContributionItem.java:411)

  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)

  at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)

  at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)

  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)

  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)

  at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)

  at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)

  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2494)

  to org.eclipse.ui.internal.Workbench$ 7.run(Workbench.java:674)

  at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)

  at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)

  at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)

  at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start (FlashBuilderApplication.ja goes: 108)

  at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)

  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication (EclipseAppLau ncher.java:110)

  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start (EclipseAppLauncher.jav one: 79)

  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)

  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)

  at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)

  at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

  Here is my manifest file:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < ExtensionManifest Version = "2.0" ExtensionBundleId = "ConnectXPress".

  " ExtensionBundleVersion ="1.0.0"xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance ">

  < author >

  <! [CDATA [Swati Sisodia]] >

  < / author >

  < ExtensionList >

  < extension Id = "com.pubpress.CXP.extension1" Version = "1.0" / > "

  < / ExtensionList >

  < ExecutionEnvironment >

  < parameter Listehotes >

  < host name = "IDSN" Version = "7.0" / >

  < host name = "Clement POUPARD" Version = "7.0" / >

  < / parameter Listehotes >

  < LocaleList >

  < Locale code = 'All' / >

  < / LocaleList >

  < RequiredRuntimeList >

  < RequiredRuntime Name = "CSXS" Version = "2.0" / >

  < / RequiredRuntimeList >

  < / ExecutionEnvironment >

  < DispatchInfoList >

  < Id = "com.pubpress.CXP.extension1 extension" >

  < DispatchInfo >

  < resources >

  < SwfPath >./ConnectXPress.swf < / SwfPath >

  < / resource >

  life cycle of the <>

  < AutoVisible > true < / AutoVisible >

  < / life cycle >

  < UI >

  Panel < type > < / Type >

  ConnectXPress < menu > < / Menu >

  < geometry >

  < size >

  < height > 520 < / height >

  < width > 350 < / width >

  < / size >

  < / geometry >

  < icons >

  < Type icon = 'Normal' >./icons/normal_icon.png < / icon >

  < Type icon = "RollOver" >./icons/rollover_icon.png < / icon >

  < Type icon = "Disabled" >./icons/disabled_icon.png < / icon >

  < Type icon = "DarkNormal" >./icons/dark_icon.png < / icon >

  < Type icon = "DarkRollOver" >./icons/dark_icon.png < / icon >

  < / icons >

  < /UI >

  < / DispatchInfo >

  < / extension >

  < / DispatchInfoList >

  < / ExtensionManifest >

  2. my other problem is, I recently changed the name of the project and the name of the application in the Menu, and since I did that, my extension is not displayed when I perform "run as" or "Debug as" Flash Builder. To enforce as / debug as, the code compiles and appears in the folder "bin-debug", the application is triggered, but when I navigate to Windows > Extensions, my extension is not present here. Although when I export as ZXP and install via Extension Manager CS 6 or CC, it shows my last extension in Windows > Extensions with the correct name.

  Any help is very appreciated. Please let me know if I need to provide more information.

  Kind regards

  Swati.

  I've solved both of my problems. And I thought I'll post for others.

  First problem, where the manifest failed Bundle of FlashBuilder, was resolved by a change in the manifest.xml (who lives at /.staged-extension/CSXS). The change I made was tag. Earlier it was (generated by FlashBuilder 4.5):

  I changed it to:

  I did a bit of hit and trial and it seems that FlashBuilder generated 4.5 tag host with the Version with only the specialties of the minimum version while FlashBuilder 4.6 requires that all versions of specialties listed in the Version attribute.

  The second problem of debug/run as not to install the extension properly in InDesign, has been set as a result of the software update of FlashBuilder.

  This is what brought me to do:

  I retraced my steps and realized last thing I did before the "Debug as Adobe InDesign Extension" of in FlashBuilder broke on my machine has been updated InDesign CS6 to the latest available version, which probably ended up with flash/flex versions of InDesign and FlashBuilder. Therefore, perform a fixed update debugging.

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• R7000: UPNP Renderer not visible when connected via WiFi

  Hi all

  I use the R7000 as a router and I have the problem that my UPNP renderer (Denon DNP-F109) is not visible if connected via WiFi (via Ethernet, everything works very well).

  Can someone give me a clue what to do here?

  I went on DHCP and UPNP in the configuration. All UPNP (Server/converter/controller) devices are in the same 192.168. * network.

  Thank you very much

  Stefan

  Hello Stefan,

  Please perform a reset of the device and check again if still the same problem.

• Firefox and safari... can not establish a connection with the server of http sites

  Hi I have a mcbook pro loaded with OSX X Yosemite 10.10.3. For some time on safari and firefox I can access https sites only and get an error message "Unable to connect", then then specifically line "Firefox can't establish a connection to the server www.seek.co.nz.

  On the same network, I have an iMac OSX X Yosemite 10.10.5 running and can access http sites that my laptop will not. I compared the network settings and they are identical, I disabled the extension and erased the caches, but always without success. Any siggestions?

  Hello. Take a look at this article, maybe this will help you. OS X Yosemite: If you can't connect to the Internet

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• printer is not found when connected to the router with the ethernet cable

  My c6280 used to print wireless (not a wireless printer) because I had hooked to the router.  Now, it won't work - I'm on Mac OSX Lion.  I tried to delete the printer and reinstall.

  Hello

  Please make sure to remove the software completely, because there is no plans for Lion.

  While the printer is connected to your network,

  Go into System Preferences > print & scan and click on the sign more.

  Select your printer and the driver will download automatically the Apple software update.

  For more information, you can follow the document below:

  http://support.HP.com/us-en/document/c02911238

  If the update fails to install Apple servers, download and install the package of the latest version of the HP to Spple printer software:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers2.7.2.dmg

  After completing the installation, add your printer as explained previously.

• To connect to the PC - tab 8W - not seen when connected via USB - Help!

  My new 8W tab is not seen by the PC connected via USB. Both are Windows 10. Help!

  Out of curiosity I will pick up an OTG cable and let you know the result!

• Can send via e-mail Wndows Mail(Vista 64-bit) but can not receive & when I close the WM I get the window that says to compact messages.

  I am able to send email in Windows Mail but cannot receive e-mail.  When I click on receive all messages, it stops just downlod.  OS is Vista Home Premium.  I just defragged, did it he ruin?

  Make sure that your antivirus software is not interfering.  That's the problem most often met with this kind of problems.  Check first via webmail, if you have access and see if the account is good working there.  If so, then check out www.oehelp.com/OETips.aspx#3 and try to remove your email account, closing and reopening WinMail and then add your account back once again and then see if it works very well.

  Steve

• iPhone not charging when connected to the computer via USB

  Original title:

  I use windows 7, when I connect my iphone to laptop, it does not load .i don't know it's because of device drivers not installed.when I connect my phone to another laptop its load.  Thank you

  Hello

  1. are you facing problems with USB devices?

  2. that you get an error? If Yes, what is the exact error message?

  3. is your phone detected in iTunes?

  4. doesn't Windows detect the iPhone as storage medium?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Run the hardware troubleshooter and check the issue.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to plug it into a different USB port and verification.

  Method 3:

  Check out the following link.

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  I hope this helps.

• GPIB has not detected when connected to the internet

  Hello

  I have keysight power supply connected to the PXI-8880 via GPIB, it does not detect when it is connected to the internet & it was detected when its not connected. Any body can help me to solve this problem.

  Hello

  This problem occurs because of a conflict in present multiple network adapters in the system. It was a question that has used for detection of targets ethernet to the system that has been resolved. But then this question has also resolved to do the same thing. You can follow the link on how to change the order of the present network adapters in the system.

  http://digital.NI.com/public.nsf/allkb/FD9E1AF5AB1343098625736F0076DE6B

  You must also make sure that the IP addresses of the network adapters are different, otherwise conflict can happen also.

• Class not registered when connecting to the Express Edition

  
  On my laptop I was able to install the 11.2.0.2.1 XE and Developer SQL 4.0.1.

  TNSNAMES. ORA is properly configured, the SQLPlus and SQL Developer therefore have access to the database, I can create tablespaces, users, tables, etc. SQLDeveloper connects using the TNSNAMES file. ORA.

  XE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = PORTLEKU)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  FITTING_SERVICE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = PORTLEKU)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  However, when I run my application program, "Fitting.EXE", it gives me a 'Class not registered' error message when I run Connection.DoConnect.

  The connection string is configured to connect through OLE DB, use Fitting_Service as data source. This is known to work, such that the program works correctly on my desktop PC that is running Oracle 10 g with OLE DB and is used to compile and link the executable file (the laptop has no software development).

  My first thoughts on this problem are:

  (1) I need ODAC on the laptop. But that creates a new home of the Oracle, is not?  So if I set up the TNSNAMES file. ORA in this new folder tree, how it can reach the server database on the same PC, a server that already has a listener configured and known to work as SQLDeveloper can see the database. There is already a TNSNAMES file. ORA files in the tree of files server and properly configured. If I install a new listener, don't he substitute somehow the existing one, may break the connection that uses SQLDeveloper?

  (2) the program Fitting.EXE has been linked on a system with 10 g and the corresponding OLE DB software. Perhaps it is impossible to connect to an 11g database, either by an OLE DB 11g if I install it to ODAC 11.2.0.2.1? I have not yet tried ODAC installation because I was afraid to disturb something that works - see already 1) above.

  As you can probably guess, I'm a little lost on this and need someone to point me in the right direction instead of groping in the dark.

  --

  JF

  Success, finally!

  Take your index on copying tnsnames alias in the client tnsnames file, I installed ODAC112021 and did just that. It works amazingly!

  Problem solved. Thank you.

  Plomong

• the music does not work when connected to the internet

  While my ipod as we connected to the internet, I can not play any music, it only put in place a picture with music on it. I don't really know yet how to explain this

  Nevermind, he just buggy upward and has no shiw the button continue

• Can not download or update via the internal proxy (company)

  Hello, me and other users actualy have problΦme during the installation or upgrade Adobe CC group Orange network and computers.

  The Group's policy forbids us the connection to your cloud particular computer offices E-desktop (Windows 7 Enterprise) using a Web proxy and this proxy increasing security in recent months and prevents us from installing any software available through your cloud, so I'm allowed to have licenses, but now I can not install the software on new computers!

  I'm trying to solve this problem, but he went a few times to do!

  You have any other solution to download the software (cd, etc.)?

  Best regards

  Creative Suite Enterprise Deployment. Adobe Developer Connection

  LWS CS6 product activation problem. Adobe community

• Web page does not appear when connected to the internet

  I have an older Dell Inspiron I try to connect to the internet.  When I connect it to a wireless or ethernet card in my desktop, I get a message that says that I seem to be connected to the internet, but it cannot display this Web page.  Any help would be appreciated.  Thank you.

  check this

  http://support.Microsoft.com/kb/956196