Can not reset the NVRAM 10.11.2?

Similar Questions

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• Can not reset the page to the new tab. Have tried everything listed on this site.

  Somehow my the new tab page changed. Instead of the new default page its search.conduit tab. I tried to type in the topic: config in the address bar and changing the browser.newtab.url back to about: newtab but it won't save my changes. I can type in the new address, but as soon as I click ok it is still the search.conduit. I checked that I have no Add ons and any additional toolbar. I've tried everything.

  You can check in "Windows Control Panel > programs ' recently installed programs see if something Conduit or any other suspicious software appears.

  You can uninstall or disable the extension value Apps 1.3.0.2.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Uninstalling_add-ons
  • http://KB.mozillazine.org/Preferences_not_saved

• BlackBerry smartphones can not reset the config...

  The system is a laptop HP w / XP.

  I installed the Desktop Manager and when I try to click on: Configuration synchronization - I get an error window that says:

  Intellisync

  There was a problem of update synchronization settings. Click Reset and try again.

  So, when I try to reset Configuration. I get another error window that says:

  Synchronize

  Failed to remove the current configuration of desktop organizer for the user with PIN 30408 17. Please shut down all newspapers of synchronization, disable auto Organizer synchronization, restart the desktop computer and try again.

  I have uninstalled and installed the software.

  And still the problems.

  When I try to sync synchronization starts, it stops when it reaches the sync settings update and the

  Intellisync

  There was a problem of update synchronization settings. Click Reset and try again.

  Error window appears.

  Any suggestions?

  Hello

  It is a problem of intellisync. Please read the discussions on this subject:

  http://supportforums.BlackBerry.com/rim/search?submitted=true&type=message&sort_by=score&advanced=tr...

• How can I reset the old my wife's phone so I can use it and she can not remember any password or ID

  How can I reset the old my wife's phone so I can use it and she can not remember any password or ID

  Here are instructions, but she will need to recover his password: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Help find the ID and the password: https://iforgot.apple.com/appleid#! & section = appleid

• Someone has changed my password to Icloud and lock my phone by finding my phone app now, can't activate my phone I have to do. My apple ID still works but not my Icloud how can I reset the password

  Some * changed my password to Icloud and lock my phone by finding my phone app

  What should I do now, I can not activate my phone. My apple ID still works but not my Icloud how can I reset the password

  ACCOUNT SAFETY CONTACT NUMBERS

• НЕ МОГУ СБРОСИТЬ СЕКРЕТНЫЕ ВОПРОСЫ.  I can't reset the security questions.

  НЕ МОГУ СБРОСИТЬ СЕКРЕТНЫЕ ВОПРОСЫ. ДЕЛАЮ ВСЕ ПО ИНСТРУКЦИИ В ИТОГЕ ВЫХОДИТ: 'НЕДОСТАТОЧНО ИНФОРМАЦИИ ДЛЯ СБРОСА КОНТРОЛЬНЫХ ВОПРОСОВ' КАРТОЧКА ПРИВЯЗАНА ДЕЛАЛ ПОКУПКИ. ПОМОГИТЕ МОГУ ПРЕДОСТАВИТЬ ВСЮ ИНФОРМАЦИЮ.
  I can't reset the security questions. Do all that goes the instructions at the end: "not enough information to restore security" map is shopping. Help can provide all the information.
  -СТРАНА УКРАИНА ПОЭТОМУ И НЕ МОГУ ОБРАТИТЬСЯ В ПОДДЕРЖКУ-
  -LANDS OF UKRAINE AND CAN THEREFORE NOT APPLY TO THE SUPPORT.

  Did you follow this instruction? If you forgot your Apple ID - Apple Support security questions answered

• Firefox 34.0.5 cannot print correctly. I checked all the pages on firefox problems and still can not solve the problem.

  I use 34.0.5 with Windows 7 and that you cannot print correctly. In print preview, it appears in a label size. I double checked all my settings in firefox and my preferences from the printer, I checked all the pages on firefox problems and still can not solve the problem.

  I was able to finally solve the problem, but I had to do a complete reset of firefox. Thank you for your time.

• Firewall settings is enabled, disabled and cannot open the Web page in Internet Explorer: "IE can not display the webpage".

  Original title: how to manually configure the firewall?

  Let me know how I can configure my firewall setting manually as it is said that your firewall setting is disabled. I have HomeXP, SP3. I am now faced with another problem with IE8 when I try to open another page, I find this error-"IE can not display the webpage". Sometimes, it works when it is updated and not some time.

  Hello

  1. do you use third-party security software that runs on the computer firewall settings?
  2. What is the error code / message displayed when trying to turn on the Windows Firewall?
  Please follow these steps in the KB article to turn on the Windows Firewall.
  Step 1
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Step 2
  How to enable Internet Connection Firewall in Windows XP
  http://TechNet.Microsoft.com/en-us/library/bb456986.aspx
  Follow the steps in order and read the content.
  See also,
  
  "Internet Explorer cannot display the webpage" error in Internet Explorer
  
  http://support.Microsoft.com/kb/956196

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  
  I hope this helps.

• can not access the internet even if my wifi connection status is "enabled", I go to another user and am connected, get updates and others and have the ability to nav.

  Windows 32-bit Vista on a HP laptop, wifi is on State is enabled and still on the past of the main user unrelated real, even when the State is supposed to be activated, I went my way, any other user and get the updates to download and other connect ability.  Can someone help me change it's for a 76 year old mother, who gets very nervous sometimes with the laptop that I gave him, help me please... Stevielee

  Hi Stevielee,
   
  1 you get an error message when trying to go online?
  2. what web browser do you use to go online?

  You are able to go online to a different user account. There must be a problem with the settings of the web browser. Try these steps and check the result.

  Step 1: Reset the Internet Explorer settings.
  1. Click Start, type inetcpl.cpl and press to enter.
  2. click on the tab advanced and then click Reset.
  3. click on reset.
  4. When you are finished, click Close, and then click OK.
  5. close Internet Explorer and reopen it before the changes take effect.
  6. check internet connectivity.
   
  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
  For more information on "Tips for solving problems with Internet Explorer", visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  Step 2: If the problem persists after you follow step 1, try to correct the user account.
  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• DeskJet F4580: new router cannot get connection and can not find the whole upward on macbook

  I had to get a new router as I have had problems with my fixed internet internet problems but now my printer does not work unless I connect with the usb cable, I have tried everything including the abolition of the printer, which now, I deleted the setting up of information out of my macbook and can not install the printer please help it worked very well with my other router...

  Hey @gingerjean1,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have replaced your router and are having trouble with your Deskjet F4580 of connection to the network. I can help you with that.

  As you use Macintosh 10.7 I recommend the use of a Windows PC to install the printer on and then to add to your wireless network. If this isn't a practical option there are a number of things we could try.

  Apple Software Update

  1. Click on your Apple icon and go to software updates.
  2. Install the available updates.
  3. Apple's HP printer driversdownload.

  If during the installation there is no wireless options then:

  1. Go to your Apple system and print and Scan preferences icon.
  2. Double-click your printer icon on the left side of this screen.
  3. In the pop-up window, click on settings, utility, and then click Open Printer Utility.
  4. In this new window, you must have a wireless tab along the top, that you can click.
  5. On the left side, we are looking for a wireless configuration wizard.
  6. Run the Wireless Setup Wizard to add the printer to your wireless network.
  7. Once the printer is connected, disconnect the USB cable to the back of the printer.
  8. Return to the Apple, system, print, and Scan preferences.
  9. Click on the button "+" at the bottom left.
  10. In this window, select your printer.
  11. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  12. Click on Add.
  13. Try to print.

  Ad-Hoc

  If the method above does not allow you to connect the printer wireless, then it can work.

  1. Perform a factory reset the printer. I will include guidance on how to do so shortly in a private message.
  2. Turn on the printer.
  3. Press the button on the front of the printer wireless.
  4. Wait for about a minute.
  5. On your Mac or another wireless device, you should see a network with a name similar to "HP Deskjet F4500 XX Print" listed. To connect to this network.
  6. Press and hold the scan button (the icon of the printer under the red x on the printer) for 10 seconds. When you release the printer should print a test wireless report.
  7. On the device you connected to the printer, open a web browser and type the IP address in the bar of address exactly as shown on the test report.
  8. You should have a network tab along the top of this window.
  9. On the left side, we are looking for a wireless configuration wizard.
  10. When you run that must connect the printer to your wireless network.
  11. Once the printer is connected, disconnect the USB cable to the back of the printer.
  12. If you have connected your Mac to the printer above and then reconnect the printer to your wireless network now.
  13. Return to the Apple, system, print, and Scan preferences.
  14. Click on the button "+" at the bottom left.
  15. In this window, select your printer.
  16. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  17. Click on Add.
  18. Try to print.

  If it allows you to connect your printer to your wireless network and then do other forum users know clicking on accept as Solution below my post. Even if you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!

• Computer shows as connected... but we can not access the internet.

  Original title: but alas... internet no.

  Recently, we had this problem where our shows as connected pc... but we can not access the internet.  What I've been able to solve, is that somehow my IP settings change.

  I'm going to "Obtain an IP address automatically" and "Obtain DNS server address automatically", but of course... when the problem occurs again I find that my "Obtain DNS server automatically an address" has been changed to "use the following DNS server address".

  What is causing my computer to change my settings?

  I think you're DIY too.  Normally, your computer and your wireless router assign dynamic IP addresses, and they change periodically - that is part of the security design.

  In your case, the DNS server is the router.

  Most of the time what you describe is your computer is able to find a wireless router but the router doesn't send an IP (its normal function).

  This is usually:

  1. Your Internet service provider is down or your connection to it is broken.  If this is the case there is nothing you can do about it.
  2. Your computer network security key does not match the one in the router.

  1 reset the modem & router.  Follow these instructions precisely: http://canadiantech.info/?page_id=136

  2. If that does not resolve the problem, you must remove this network from your list of networks to manage Windows 7.  Then try to connect again using the network key, you know.

  3. If this does not work, you will need to do a factory reset on the router and re - install the router according to the router set up instructions.

  4. If after all the above does not correct the problem, you must replace your router.

• Can not find the handle!

  Hello

  I am updating an application and it works well in 5.0.But he can not just run under althougth 5.0, its icon appears in the home screen.

  All modules does not appear to be loaded compeletely.

  DEBUG:

  CodeStore.DependencyList.reset () - can not find the handle of the name update_1000-1

  CodeStore.DependencyList.reset () - can not find the handle of the name update_1000-1

  CodeStore.DependencyList.reset () - can not find the handle of the name update_1000-4

  Thanks in advance

  What version of BlackBerry Java SDK or BlackBerry JDE do you use? See the link below for information on compatibility.

  http://supportforums.BlackBerry.com/T5/Java-development/appropriate-version-of-the-BlackBerry-JDE-an...

• Microsoft Visual C ++ Runtime Error - can not see the path of the file.

  When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.

  All it says, this is:

  Runtime error!

  Program: C:\Program F...

  How can I extend the above so I can see the path of the actual file?

  Also going to go for a 2 for 1 here...

  Immediately after the closure of the runtime error box, I get the message that search settings stopped working.  I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place.  I run Windows 7 Ultimate.

  Error information:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SearchSettings.exe
  Application version: 4.5.0.2
  Application timestamp: 4e04ab86
  Fault Module name: MSVCR90.dll
  Fault Module Version: 9.0.30729.4940
  Timestamp of Module error: 4ca2ef57
  Exception code: 40000015
  Exception offset: 0005beae
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:9956
  More information 2: 995611374799875ff43c42d4b1b84d70
  3 more information: 3d4b
  Additional information 4: 3d4b4db0455ea2295d172b959897673c

  Maybe just download a new MSVCR90.dll but I would like to hear what you have to say.

  Hello

  ·         Did you the latest changes on the computer?

  We must first identify to identify the program that is causing startup problems.

  Step 1:

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  Step 2:

   

   

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Startup error: DLL Load error can not load the resource dll: REPLRES. RLL the specified module could not be found

  Original title:

  ReplSync.dll - error loading DLL cannot load resource dll: REPLRES. RLL the specified module could not be found

  I get this error message whenever I start my computer: replsync.dll - DLL Load error can not load the resource dll: REPLRES. RLL specified module is not found Help please?  Thank you!

  Hello
  You did changes to the computer before the show?
  Method 1:
  Step 1:
  
  You can try to start in safe mode and check if the problem persists.

  The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Advanced startup options
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  
  Step 2:

  If the problem does not occur in safe mode, and then try to perform the clean boot and see if the problem still occurs. Clean boot helps eliminate software conflicts. For more information, see the following link:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the article mentioned above.

  Method 2:
  
  You can run Windows Defender Offline tool.

  See the following link for more information about the same:

  What is Windows Defender in offline mode?

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
  
  Windows Defender Offline: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ
  
  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3:
  
  Try the SFC (System File Checker) scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know if it helps!