Can not set folders to network HP8500A

Similar Questions

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• HP1510 0 x 00000709 can not set as the default printer

  I installed my new HP1510 printer on computer with Windows 7, but I can not set as default in Control Panel printer, get error message 0 x 00000709. This means I can't print a PDF file as my previous printer, which I uninstalled it, is always shown as default in Adobe Reader. I can print emails ok. Please help as I bought the computer to print a PDF file!

  Hello lanto17,

  Welcome to the HP Forums!

  I understand that you cannot set the default printer and are experience PDF problems. Please, try the following steps to answer all your questions:

  Click Start, type Regedit in the search bar. Right-click on it and choose "Run as Administrator". Now, find the following key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows

  You will need to give this key all permissions. To do this:

  (a) right click on the key that you need to change and/or delete. Click on "permissions...". »

  (b) click on 'Add' in the window that appears.

  (c) there will be an empty box under "enter the names of the objects to select. Type "Administrator" (without the quotes), then click on "check names".

  (d) an administrator name appears, click 'Ok' when it does.

  (e) you should be able to select the profile (click) the administrator under "group or user names. Once you click on it, click on "Advanced".

  (f) click the 'owner '.

  (g) click on the Administrator profile, then put the checkmark in "replace the owner of subcontainers and objects".

  (h) return to the "Permissions" tab, then make sure the Administrator profile is selected.

  (i) in the "Permissions" tab, put a check in each box available. Boxes will probably accompany "Include the permissions that can be inherited from the parent to this object" and "replace all permissions of child object with permissions inheritable of this object.

  (j) then click on 'change '. Put a mark chark in "Full control" under allow. Click Ok. Now click on apply (you may receive a message of Security window, simply click 'Yes'), and then click Ok.

  (k) out of the registry, and then restart the computer.

  The last step is to restart the print spooler. To do this, type services.msc in the search bar. Right-click on it and choose "Run as Administrator". Find print spooler and stop it, then start it.

  Now try to set the default printer like PDF files and printing. Let me know what happens. Thank you!

  Have a wonderful day!

  Mario

• Cisco ACS SE "set ip" error: could not set up new NETWORK card configuration.

  Hello

  I get the error "error: could not set up new NETWORK card configuration." When I try to set the IP ACS SE.

  When I called into the device image and tried to do an initial installation, the IP to not hold after the restart and went back to the default value.

  I went by NetPro and apparently it is a common problem. One person it is solved re-imaging unit, but who has not worked for me.

  Someone there with a solid solution? I use NIC 1 FYI.

  EDD.

  Ed,

  Please make sure that if ACS is associated with active before setting Ethernet connection

  or change the IP address of your ACS system engineer.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.0/installation/guide/appliance/admap.html#wp1109621

  Kind regards

  ~ JG

• Window can not automatically detects the network proxy settings

  Original title: window could not automatically detect the network proxy settings
   
  Windows network diagnostics says constantly "" window could not automatically detect the network proxy settings"" How can I fix it I have a Windows laptop, 8 and I can't use the internet, most of the time, but the internet bars are full and there is no yellow triangle with a! next to him.  Usind Ethernet instead of WIFI makes not much difference if you please, help.

  

  

  Hello Sarandeep Singh,

  Thanks for your reply Sarandeep. Now, this problem has been resolved. I that follows the steps of: https://support.microsoft.com/en-us/help/15287/windows-why-can-not-get-connected ( run Networking command after using the convenience store network )

  Thanks again.

• Can not share folders with a vista home another computer on my network.

  Have two Vista PCs over a wireless network. They can see the other computer name in the network window.

  I can share files remotely via the public folder. Can share a printer also but I can't share folders via the option "share files from any folder on your PC.

  I put in place to share the folder names appears in the PC network to the remote address, but when I click on it to open it I get an access denied message.

  See if these help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-sharing-files-and-folders-in-Windows-Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials
  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

• Can not understand how to network my laptop windows 8 with my PC running XP Tower.

  I have worked on it for hours and just can not understand. I have two computers connected wirelessly to the internet via a telephone line modem.  have changed both computers to have as the workgroup name. I ran assistants set up and got to the point where computers see eachother, but does not share anything between them. My main goal is to be able to print wireless from my Windows laptop, 8 to the PC that is connected to the printer. I followed all the steps in this link http://windows.microsoft.com/en-us/windows/networking-home-computers-running-different-windows#networking-home-computers-running-different-windows=windows-vistabut nothing works. Any ideas?

  PC connections from one to the other, is usually held with a CAT5

  cable... It looks like an ethernet cable, but is not. If both in the same database.

  In addition, microsoft has a utility called 'print migrator' downloading to xp, open,.

  create a shortcut, move the shortcut to windows pc 8...

• Vista Home Premium can not find applications and networks.

  Vista Home Premium (manuf. installed) can not find applications (application to go to define associations in control panels?), does not recognize my wireless network and available restore points are only for dates after the problem has occurred.  If I buy a Home Premium DVD and do a clean install should I expect to get a working computer?

  Hello

  You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
  totally your data off the drive of backup, and you need to reinstall your programs. If you do not
  Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
  Then you can make a complete new installation - just select the format options that erases the entire disc (this
  Clears all data as well).

  Some system manufacturers use Partitions recovery and other methods to allow you to go back to a
  completely new facility. So check with your system manufacturer to see what options you must do
  - and it's certainly doable - just a question of the process the manufacturer of the system set in place to
  you.

  What are the system recovery options in Windows Vista?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx

  This tells you how to access the System Recovery Options and/or Vista disk (some manufacturer have other methods)
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  -----------------------------------------------------------------

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Can I set up a network with a WinMe computer?

  Hello. It is possible to set up a network between a WinME computer using Win Vista or Win7?

  There are two laptops that have the latest OS (Home Premium versions).

  WinME computer has just a modem 56 k inside. Laptops have phone ports (I forgot the name).

  Does anyone do this? Y at - it any installation or troubleshooting, I might have to do? do I need a cable/ethernet instead of phone ports ports?

  I don't want to scan the HARD drive on WinME computer for malicious software and be able to download a programme of protection for her with updates. I saw a few on cnet.com.

  If there is any advice that I might have, I appriciate it.

  WinMe has a Council of Gigabyte GA - 7ZM Rev 2.2. Mobo IDE. PCI expansion slots.

  The short answer is - maybe.

  I added a network adapter on a WinMe PC a few years ago so I could connect to a WinXP PC.  While it was a success, if I consider this now I sit and the purpose for which I use the network and then evaluate the alternative way to do the job from the list.  If you simply want to add in its storage capacity [as a backup location, just for example] then buy a USB would be cheaper, faster, less complex, more reliable, more flexible & infinitely safer.  I can't imagine what task I would now use the WinMe for that would justify the aggravation & costs of putting in place a network.  My old WinMe PC is now collecting dust, but if it has a residual interest as a storage device [though relatively very slow], I bought a hard drive for its internal drive enclosure.

  A couple of updates first:

  1 the WinMe machine will be a gaping hole in your security.  Because it is not updated for the modern vulnerabilities, you will need to consider as a risk and have never connected it while all other machines are connected to a network such as the internet.  This will remain true regardless of the modern antivirus / anti-malware applications you put on it.  You need to physically remove the head whenever you connect modern laptops.

  2 you will need to spend money & time to know if it works or not - there is no certainty of success.

  Well, this is what you need to do: -.

  1 check the "phone ports" on modern laptops.  They are actually a little bigger than the phone taken?  I think they are rather taken LAN cable.  If not then you need to buy a network card that fits into any card slots have spare.  If you are not sure, then get a LAN cable & see if it fits correctly or not.

  2. check the WinMe PC.  Is there a spare PC card slot?  It would be a slot that is 2.1 inches [5.4 cm] wide.  You will need to buy a network card for this PC and this was the only type of housing that I could get a network card for.

  3 I bought a Belkin CardBus network card F5D5010.  You will need to check that its modern equivalent has drivers for WinMe as this is not guaranteed.  I found that the Belkin instructions are very good and that the parameters of the proposed system worked correctly.

  4 unless you don't want to connect the WinMe for a computer laptop modern at once, you need to buy & set up a router.  You should also check that it can work with a WinMe PC.  The router must be able to manage all the settings of the system you need, but you certainly need to compare his instructions with the WinMe instructions provided by the network card that you may have to combine the two to get a positive result.

  5. If you want to only connect the WinMe to laptop modern both & you really are determined to move forward, then carry out a procedure step by step for the creation of a network of Ethernet cable of two computers between Windows 7 and Windows XP with ICS but change the proceedings with what you learn directions of the network card.  When I wrote this procedure to connect a Win7 for a Windows XP, I crushed my old notes for WinXP WinMe network and all I remember off the top of my head it's WinMe settings were practically the same, but I had to look in different places for them.

  Finally, once more, the short answer is - maybe.

• BlackBerry smartphones can not register on the network

  Hi, I tired a couple times to register my new 8520 on network with the Routing Table host following the instructions. But whenever I try to create a new internet service account, still my registed machine system not yet and so I can't set up my personal e-mail at all. really frustrating. can anyone help? Thank you.

  Hello and welcome to the Forums of Support BlackBerry.com.

  Do you have a BlackBerry data Plan on your mobile service provider account? You will need to call your provider and confirm that.

• can not find the wireless network

  Hello

  I hope someone can help. Today, I got a new installed wireless router. Until now my main and most recent computer can connect to the internet fine (so I know this isn't a network problem), but my old computer does not find the network when scherching of available networks, it may pick up other networks and communicate with them simply not my own. It is the first time that I am trying to connect to this wireless computer.

  The computer is a HP pavilion t770.uk Windows xp sp3.

  You need to replace the network adapter. The current NIC is older than the specification of N, so it can not communicate with this Protocol.

  You can try to configure your router and the new pc to use b, if they allow.

• can not set default page

  I can't set the default page. It keeps coming back to: http://search.jzip.com/

  1. Uninstall jZip (or jZip Windows or Windows jZip Toolbar) from the control panel > Add / Remove programs.
  2. Open Windows Explorer
     • Navigate to the folder C:\Program Files\jZip Toolbar
     • Double-click on uninstall
     • Delete the folder of Windows jZip toolbar.
  3. In Firefox, delete the add-on if it's there
     • Choose the modules > Extensions.
     • Select the jZip entry Toolbar If it is there and click Uninstall.
     • Close the window/tab of the Add-ons Manager
  4. In Firefox, reset preferences
     • Type of topic: config in the address bar and press ENTER.
     • If you see a cautionary, accept it (promise to be careful)
     • Filter = jzip
     • Results in the bottom panel, right-click each entry and click Reset.
  5. Restart Firefox.

  It would have taken options when installing jZip; See the image below.

  An excellent free application in lieu of jZip (and one that I used for a time very long) that does not install all the 'extras' are 7zip:

  • http://www.7-zip.org/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• Printer HP Officejet 6100 (h611a) can not find the WiFi network

  My printer HP Officejet 6100 has recently lost its eprint connection and would not reconnect.  I asked for help and told

  try to use an IP address manually.  I tried this according to the instructions provided to me for the manual IP address, subnet mask and so on.  I selected apply.

  The restarted printer and now the printer cannot be found or will not connect to my

  wireless network.

  I tried to power on the printer, the modem and the router so that it would reset but the printer would not still find or connect to the wireless network.  The little blue light on the printer for wireless connection just continues to blink.

  Because it connects to the wireless network I can not go back in the server web part to cancel the IP address manually and other changes.

  Is there a way I can reset this?  Or get my printer to connect to the wireless network.

  Steve

  Hi scthom,

  Welcome to the Forums of HP Support! I see your HP Officejet 6100 has recently lost its connection ePrint, and now, you are not able to get connected to your wireless home network. I would like you to follow the steps below:

  Please start here: convert from a connected printer USB wireless

  You are now connected to your wireless network? Please let me know the results, I'll watch for your reply.

  Thank you

• Problems with the DC Power supply QL 355TP: I can not set the tension level

  Hello

  I'm trying to control a power supply DC via GPIB. The power supply being used is the QL355TP of society Thurlby Thandar Instruments (TTi). There are no drivers of OR to control the instruments, then I need to download and install the driver from the website of TTi: the package I installed is as follows:

  "QL - P power supplies, (including QL Series II) series pilot National instruments (Labview and CVI)"

  and I also installed the following:

  "QL - P power supplies (including QL Series II) series, IVI driver"

  So, my problem is that when I try to use the sample application of the driver 'Volts.vi DC Ouput'; defines a specific level voltage, does not work properly. The application gives no error, but it is not set the specific level voltage. However, other functions work properly, as the measure or activate the output. I tried a lot of things, but I don't know why it does not work.

  I enclose the block diagram of the application and the front panel:

  

  

  I must say that I barely control instruments using Labview and is possible that this problem would be because I did not consider things basic and mandatory.

  Any help is appreciated.

  Thank you.

  p.s. Try to replace the decimal comma to period. It is possible that the driver does not correctly handle the comma.

• BBM BBM with z10 can not work under cell network

  Hi all

  My edge network-(3) use z10 and now he can't use BBM when networking is enabled.

  but the other app can run as well as browser, BBW. BBM just offline in the present case.

  also, the logo 4 star disappears when you only use the cellular network.

  all ok when the wifi network.

  is it soming to config? or defined?

  Another question for teachers:

  I have bold 9780 and flashed version 6.x. This device can freely use BBM without BIS/BES services?

  Thanks and waiting.

  Glad you're up and running!

  Let us know if you need more assistance.