Can not start my pc Vista

Similar Questions

• Vista: The device can not start (error Code 10) for a USB CDC device which works fine in XP

  I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista.  The device uses the usbser.sys driver and emulation of the virtual Comm Port.

  The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes.  Shows Device Manager: device can not start (error Code 10).

  Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC.  With Xp, it all works very well on more than one PC, with Vista, there are questions.  I use the INF manufacturer provided for Vista, still no results.

  Any ideas on this would be greatly appreciated.

  Hi NuWaveDC,

  Thank you for taking the time to post on the Microsoft answers Forums.

  Please see the following article for an explanation of this error code 10.

  Explanation of error codes generated by Device Manager

  http://support.Microsoft.com/kb/310123

  Follow the steps listed for the error Code 10 see if this helps solve your problem or not.

  Please post back to let us know if this information was useful or not, so that we can help you if need be.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

• BITS can not start (error 80246008), tried to solve it, received error 1079, please help.

  Hello

  I tried to update my windows service, but the BITS can not start (error 80246008). I tried to solve it using the suggested steps, however, got an error 1079 (account specified for this service is different from the account specified for other services running in the same process). I use Windows Vista Home premium version 6.0. Third-party antivirus software, I don't have online protection of Rogers. For the record, I'm not a technical person at all. Any help will be appreciated. Thanks in advance!

  I tried to solve it using the steps suggested,

  It's what you tried, if not, please do it might help

  See if anything here helps.

  Error 1079: the account specified for this service is different from the account specified for other services running in the same process

  If you receive this error message, follow these steps:

  1. Click Start, click Run, type services.mscand click OK

  2. double-click on Background Intelligent Transfer Service.

  3. click on the tab to open a session.

  4. click Local System account and then click OK.

  5. right click on Background Intelligent Transfer Service and then click Start.

  0 x 80246008 WU_E_DM_FAILTOCONNECTTOBITS A download manager operation failed

  because the download manager could not connect the smart Background

  Transfer Service (BITS).

  http://support.Microsoft.com/?kbid=910337>

  You receive an error message when you try to download updates from the

  Windows Update Web site or the Microsoft Update Web site, or when you

  try to start the Background Intelligent Transfer Service 0 x 80246008

  http://support.Microsoft.com/kb/916251>

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

  13:06:42 UTC 08/26/11

• Can not start, help!

  Hello

  I use 16 G WiFi touchpad, I can not start my device, it's just to see the HP logo only, I think that my WebOS is dead, how can I get the OS and reinstall?

  Hello Refale,
  
  to restore your device, you will need to use the webOS Doctor tool. To access the webOS Doctor tool, you will need to go to http://www.hpwebos.com/account and sign in. Then, click on the Options button of the device next to your keyboard and click on Get webOS Doctor.
  
  There is a link on the site, in case you forgot your password.
  
  If it's still a no go. You can take a look at webOS Internals Web site. They have a list of addresses to download for all doctors to webOS.

• Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade

  Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade.

  The only option I have found is to click again on the download button, but the circle of download rest bike for a long time and ultimately that nothing happens.

  See if that helps...

  Start with CMD + r or the Option/alt key to boot from the recovery partition & use utility disk from there to repair the disk, and then repair permissions.

• can not start any other os that mac os install dvd

  I can not start any version of windows or ubuntu on my mac pro 1.1.

  Tried:

  Windows 98

  Windows 2000 Professional

  Windows 2008 Server

  Windows XP home

  versions of Windows 7 Professional 32 & 64

  Ubuntu 10.04 lts 32-bit

  Ubuntu 14.04 32-bit and 64-bit

  most will show a cd when you hold down the ALT to start up

  and those that I could start supposibly to give me a symbol of apple in alternation with the no symbol.

  searching the Internet, it seems many people have this problem.

  Details of my machine:

  Model name: Mac Pro

  Model identifier: MacPro1, 1

  Name of the processor: Dual-Core Intel Xeon

  Processor speed: 3 GHz

  Number of processors: 2

  Total number of Cores: 4

  L2 Cache (per CPU): 4 MB

  Memory: 16 GB

  Bus speed: 1.33 GHz

  Boot ROM version: MP11.005D.B00

  Version of the SCM (System): 1.7f10

  Chipset model: NVIDIA GeForce 7300 GT

  Type: GPU

  Bus: PCIe

  Slot: Slot-1

  The PCIe track width: x 16

  VRAM (Total): 256 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0 x 0393

  Revision ID: 0x00a1

  ROM revision: 3011

  
  

  The system version: Mac OS X 10.7.5 (11 G 63)

  Kernel version: Darwin 11.4.2

  Boot volume: OSX

  Boot Mode: Normal

  Ensure the virtual memory: enabled

  64-bit kernel and Extensions: No.

  We window directly on the hardware, you must install via Boot Camp

  http://www.Apple.com/support/Bootcamp/

  a 64 bit OS will not work unless you use an add-on as the EFI on 2006-2007 Mac Pros is only 32-bit.

  The CD of Ubuntu 64 regular bits have to begin on older Intel Mac, as MacPro1, 1, because of incompatibilities EFI. You must download a special + mac CD of Ubuntu to work around this problem. To 11.04, you can get it here:http://cdimage.ubuntu.com/releases/11.04/release/

  http://Forum.Netkas.org/index.php?topic=1123.90

  Also:

  https://help.Ubuntu.com/community/MacPro

  http://AskUbuntu.com/questions/507354/how-to-install-Ubuntu-14-04-on-my-Mac-Pro-1-1-with-a-raw-hard-drive-by-a-bootabl

• I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

  I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

  You can repair XP or try the following:
  http://support.Microsoft.com/kb/917964
  http://support.Microsoft.com/kb/307545

  TO

  Re - install http://support.microsoft.com/kb/978788

• I have age of empires 3 and I can not start the program.

  Hello

  I have age of empires 3 and I can not start the program.
  The program is installed, but once the autorun.exe appears (with the icons of the game, uninstall, website, out) I click on play and the game does not just start. My computing needs are fairly good for the game because I used to play the game on the same computer later.

  Thanks for your help

  David

  Bink is what plays the scenes cut in many games.

  Installation folder of AOE 3 the binkw32.dll should be in games.
  If it is then it is may be damaged and reinstall the game normally would set the
  problem.

  AutoPatcher.exe - I do not know because I never use auto-patchers with games.
  I have always to download the patch and install manually.
  However, my game has the RockallDLL.dll file.

  I don't really know a good site to lead you to these files.
  You can find a binkw32.dll in another game. Try doing a search of
  Program Files (x 86) (or another location if you install games to the default locations). If you have the file in another game you can copy into your AOE3
  folder of the master installation.

  There was a lot of discussion on these forums about AOE3 so a
  search of these forums may find another suggestion.
  You can also try the specific AOE3 forums-

  Age of Empires Forums - Forums

  Age of Empires III heaven Forum

  .

• CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)

  Hello

  Can someone help on this

  CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)

  I just installed esx 4.0 update, one under vmware workstation and get this error

  Try to do this:

  Client-> ESX vSphere / vCenter-> left click on the ESX Server-> Configuration-> advanced-> vmkernel.boot.usenumainfo-> Vmkernel-> uncheck the box (this may require a restart if she does not take effect immediately)

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Windows (Vista) can not start because the following file is missing or corrupt: < root windows > \system32\ntoskrnl.exe

  When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt: \system32\ntoskrnl.exe. Please reinstall a copy of the above file.

  I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.

  I tried to restore my computer and there is no restore point.

  I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:

  1. Turn on your computer and insert the CD or the DVD of Windows Vista.

  2. Install Windows page, follow all of the instructions that appear, and then clickInstall now.

  3. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.

  6. Follow the instructions on each page. On the type of installation do you want? page, clickCustom.

  7. On the place where you want to install Windows? page, select the partition where you want to install.

  8. Click next to begin the installation. You can see a compatibility report.

  and then had this error that says;

  windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.

  Now I am stuck and don't know what to do.

  Someone at - it solutions for me. Help, please.

  Hello

  1. on which the drive was initially installed OS?
  2. What partition you selected to install Windows?

  You can try to perform a startup repair by using the Vista installation disc.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

  How can I fix a startup (startup)?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem 

  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly 

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista 

  If nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.

  Kind regards
  Afzal Taher - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not start my Satellite L305D-S5940

  My laptop is Toshiba Satellite L305D-S5940 with Windows Vista Home Premium. The following message comes when I try to start it.

  Windows could not start. A recent hardware or software change might be the cause. For fox the problem:
  1. Insert your windows installation disc and restart your computer.
  2. Select language settings and then click on "next".
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Boot\BCD
  Status: 0xc000000f
  Info: An error occurred trying to read the boot configuration data.

  Unfortunately, I do not have the windows installation disc. What am I supposed to do? I can't access "safe mode" by pressing F8. I'd be grateful if someone helped me feed my computer please.

  Now, it's quite complicated especially if you cannot boot your laptop in safe mode.
  I'm afraid you may not do much and best and solution the easiest would be to new installation OS m.

  You don t have the windows installation disc, but you maybe DVD recovery?

• My Satellite will not start after installing Vista updates

  My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

  I didn't have any rescue CD or save a Vista CD with my computer

  Can someone help me. Do you have ideas how to run again.

  Thank you very much
  Christine

  Hello Christine

  Can you please tell us which laptop model you have?
  Did you start your laptop with F8?
  What happens when you click Repair option?

  Please give us more information.

• Equium A100-338 does not start the OS Vista - update Bios?

  Hi guys,.

  My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version of windows. Are there any other mirror to get the traditional update or even a way to convert a the update the BIOS from Windows startup disk?

  Thank you

  Hello

  If you can see that one version of BIOS on Toshiba page then only one version exists and is available!

  > The problem is that the computer does not start the Vista operating system
  I don t think that BIOS could be responsible for this problem.

  You must first provide more info on this problem!
  The laptop goes to home Toshiba screen? Have you tried to recover the laptop with the Toshiba Recovery CD?

  Please provide details!