can ocr and vote files resident on the same disc?

Hello

We use 11.2.0.3 on linux.

When I created OCRVOTE diskgroup with 5 raw disks, oracle created default 3 discs with right of vote and rest 2 discs to keep the OCR files.

But when I created OCRVOTE diskgroup with 5 raw disks, I have found that all 3 disks are votingdisks and OCR, also located in the same diskgroup.


How can it be possible? That is to say, is it possible for OCR files be placed disks marked as voting disk?

Kind regards

Saikat

Advertisement

Hello

Check: RAC: frequently asked Questions (Doc ID 220970.1)

How the registry of Cluster Oracle (OCR) is retained when using ASM?

https://support.Oracle.com/epmos/faces/DocContentDisplay?ID=220970.1

> Oracle instructor is to show that scopes are spread over only 2 discs among the 8 discs.

As far as I understand:

What Oracle instructor shows an example of how is stored the mirror of the measure where OCR has been stored, it has used a simple example with only 2 measure showing a measure and a mirror of measure on different failgroup, does not mean wich used only OCR 2 measure or use only 2 asmdisk.

In this case, Oracle will use all failgroups placing a (primary) measure in each failgroup and store a copy of the measure (mirror) in a different failgroup.

Concerns about redundancy (that was the point):

Votedisk you have a right to vote in each asmdisk.

OCR store using a diskgroup redundancy with normal you have a measure mirrored in a different failgroup. (she)

How to measure Oracle Store OCR?

She spread file OCR on all disks if ASM Diskgroup configuration allows do.

If you have an OCR with 300 MB and store you it in a Diskgroup with external redundancy using 1 MB AU_SIZE and the size of the measure is 1 MB ASM spreads extended across all the disks in the Diskgroup storing bodies in all the balancing asmdisk.

But we should consider the OCR file size and configuration of the ASM Diskgroup

The ASM file content is stored in a disk group as a set or collection, extensions of data that are stored on individual disks in disk groups. Each extension resides on an individual disk. Extensions are made up of one or more allocation units (to THE).

When you create a disk group, you can set the Oracle ASM with A unit allocation size U_SIZE disc of the group attribute. The values can be 1, 2, 4, 8, 16, 32 or 64 MB

Therefore, if you create an external redundancy diskgroup with 8 ASMDISK using 64 MB AU_SIZE, EXTENT_SIZE is 64 MB and size of 100 MB Oracle will use OCR only two ASMDISK using 2 scope of 64 (128 MB) does not matter if you have 8 DISKS ASM.

Kind regards

Levi Pereira

Tags: Database

Similar Questions

  • I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

    I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

    Hi sindres79946597,

    Open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in the new tab in the same window.

    Now, reboot your system, when you open multiple PDFs that all will open in a new window so that you can easily compare.

    Kind regards
    Nicos

  • can't have 2 files open at the same time PS? !!

    I just upgraded to cs3 to cs6.  I open a file photoshop very well, then I click on another PS file so that I can drag a layer from one to the other.  but when I click the second file it opens - but it closes the first file!  This cant be right.  How to make 2 ps files open at the same time?

    User error.

    Just acheck "Documents open as tabs" in Photoshop preferences.

  • Can I put several Windows PC with the same disc?

    I'm upgrading two Windows Vista and two Windows 7 PCs.

    Can I use the same disc 32-bit on Vista PC and the same 64-bit disk to upgrade the two Windows 7 PC?

    Thank you

    danoVista

    Hello and welcome!

    As long as all the four activation keys are different, it is not to be a problem.

  • Had a project done with first elements 11.  All media files and PRE files were in the same folder on an external hard drive.  Received a new computer, loaded first items 11 (which of course doesn't recognize not all previous projects as it is)

    Had a project done using first items 11 (the file exported and posted on youtube).  All the media files and PRE files associated with this project were located in the same folder on an external hard drive.  Got a new computer, responsible for first 11 elements (which of course doesn't recognize not all previous projects because it is a new installation) and now cannot open the original project to make some adjustments (connected to the external hard drive of course)...  Even tried to open the last saved auto program as well, no luck.  Just get a shell of the original project, but no real media file is passed in. Then get a prompt asking you where the file "rendering-3090026..." (20 More digits) is located.  Looking for C drive and external hard drive without success. Help!

    delilah12

    Which operating systems are involved - old and new?

    The external drive has the same drive letter on the new computer as it did when it was used on the other computer?

    Where are the video preview and the old led, Audio preview files compared to new? See Edit Menu/preferences/Scratch discs?

    Are all the place where is the file... messages just to render files? If all are for rendering files, what happens if you click ignore for their

    messages? Can you enter into the project and render it again if necessary and proceed with the project?

    Please see the bulletin. With the above information, we will decide which way to go? It seems that a media disconnect situation has developed in

    the passage from one computer to the other.

    RTA

  • Open and save files uploaded at the same time (with one click)

    GENERAL OBJECTIVE: To click on the PDF links online, save the files to my downloads folder AND open them in Acrobat Pro, all with a single click.

    Anyone has a suggestion for how I would say Firefox to save and open my downloads? I use OS X, if it help/questions.

    This happens automatically with my Mac. I a using 10.4 and another with 10.6. I use PDFView rather than Adobe, but I doubt that it makes much difference. You use Adobe as a request for assistance, not a plugin, right?

  • Can DeviceNet and CanOpen co-exist on the same bus - CAN?



  • Write a string and an integer and a table all in the same file?

    Hello

    I am currently it several different types of values with LabView.

    I have a shot, a few numbers and several paintings.

    Thus, for example, I have a timestamp of the chain, several values of "integer" amplitude of the signal for example, RMS value, frequency and I have several paintings - table of signal, the FFT (PIC and location) values.

    Basically, I'm trying to find a way to write all the values in a single file. I can write all the individual types to separate files (so I can write the RMS, amplitude and frequency to a single file, some of the tables in the other)
    but is it possible to write a string and an integer and a table all in the same file?

    Pointers would be much appreciated,

    Thank you

    Paula

    Your file will be all text... any format in a table of text, to build as a single table, "table chain worksheet", to write to the file.

    (I'm sure this has been on the forums before... a search it would have thrown upward)

  • In Windows Mail, I can not open .doc files, I get the error that it was not bound

    In Windows Mail, I can not open .doc files, I get the error that it is not associated, and he tries to search in appdata/IE5 for a reason any.  PDF, PPT, XLS all work fine.  I tried unassoc to unassociate file types for .doc and .docx associate then again these via Control Panel and it STILL does not work.  I'm at the end of my home please help.
    Nicki

    I had to remove the regedit.  for some reason the mail windows refuses to unassociate so go to regedit, I don't like playing with regedit, but it worked, I deleted and then again, all ok now.

    Thanks for the help!

  • For a given file, how to add and change file properties on the Details tab, for properties that are not in the properties list?

    Now, I am aware of the modification of the properties of the file is simple in Windows 7 Explorer. Select a file, 'Properties', then tab "Details".  Some are not editable, and that's understandable.  Click on next to any area classified as year, Genre, Publisher, etc. and the apply.  No problems so far.

    Then of course in Explorer, when you right click on a column header, you get several choices of column beyond the usual that is displayed by default; Date, the Type, size, etc.  But, there is an option "More...", which has up to now, MUCH more useful properties to choose from, such as the model project, Department, job statusand so on.

    It's fantastic!

    But when you look into the details of any given file, none of these additional properties even are listed to be edited.  Why offer to view these details, if you don't change them, or add them to different files?  I must be missing something.  I do not need to add my own custom details, this additional list has a choice, that I need; If only I could edit the files to get this info.

    How to add and change these properties to files?  Word, Excel, MP4, AVI, JPG; I would add these properties, so I can set directly in the Solution Explorer, as you would by name or Type.

    Any help would be greatly appreciated!

    My experience is that most of these 'extra fields' no existence not as fields in the directory (folder) itself.  On the contrary, these fields exist in the target file itself. Each file type has its own format and established file except for the types of files that belong to Microsoft, Microsoft cannot control or arbitrarily change the format of a particular file type.

    For example, a ".jpg" file  The format of this file type allows a large number of areas such as comments, Tags, date taken, opening, device manufacturer and so on.  If you go into the properties on a .jpg file, you will see a lot of them and will be able to change.  After changing any of these fields, you will find that the file itself has been changed to contain this information (as can be verified by the parity of the file and to come check upward with a different checksum).  If you display one of these fields in Explorer and 10000 ".jpg" files in this folder, then Explorer must open each of these 10000 files to extract the data in the corresponding fields, you have chosen to display.  May take some time.

    Compare that to the same picture saved to a file ".bmp".  The ".bmp" format has no provisions for any of these fields, so you will not be able to view, save, edit, or sort by them.  If the editable fields are directly related to the type of file that is displayed.

    Microsoft has apparently interviewed a lot of file types and made a compilation of the editable fields in each type of file and the Union of the selected fields in which can be displayed and modified.   That's apparently what you see in the option «More...» ».   So, in summary, the file type determines which fields are available for editing and posting.

    HTH,

    JW

  • Template file - y at - it an easy way to update the files related to a model, and download them (put) at the same time?

    First of all, I am a user of Adobe software for 20 years now.  I love the adobe range. I want to just clarify.

    Question... Template Files - y at - it an easy way to update the files related to a model, and download them (put) at the same time?

    Its been bothering me since I started using Dreamwever 10 years now, when you use template files to create small, who later turn wholesale websites. Whenever I update a template file I have to find each file in the files Panel, then download them. When I navigate through a lot of directories to find it can get a lot of time and boring.  Whey cant be just a button that does it? See the attached file.

    Is there a way to do this?  Any help would be appreciated.

    Thank you very much

    Andy

    Dreamweaver-Updated-Template-File.jpg

    The sync tool should do what you want (second "circular arrows" icon in the files window).

    Who checks your files against the files of the current server and download all that is changed. By default, is also download any file from the server which is more recent than your local files at the same time, but you can set it to 'Put the latest files remotely' rather than 'get and put newer files' and you should be good to go.

  • Why can't I open INDD files using exactly the same InDesign CS6 product I've used to create them?

    I tried to modify the work sent by another designer. He sent me the INDD files (as part of the packages) but I could not open in my version of Windows of InDesign CS6. My computer told me that I had not any software installed that could open the file. While searching on the forums, I thought it could use InDesign CC, that for some reason any crazy I can't open INDD files created using the CC version and so I have to send him the IDML files. OK, fine, he sent me the IDML files.

    IDML files open correctly in my version of InDesign CS6. Large. They open in the form of documents not saved, so I save them as files InDesign CS6. OK, well. Except that I can't open files INDD, that I just created. Yet once, my computer tells me that I don't have any software installed that can open the file. But how can this be? I just create the files using this software!

    If I do a test. I can't open a file that I create from scratch? N ° it seems that I can't open INDD files in my version of Windows of InDesign CS6, even if I create them from scratch. Can anyone help?

    I found an answer here: http://forums.adobe.com/message/2604646

    1. I opened Windows Explorer and went to tools >... Folder Options > File Types.
    2. I selected INDD and click Advanced.
    3. I chose the action open and press edit.
    4. I went to Adobe InDesign (for some reason any, that adobe does not appear in Program Files by default, but if I go to Program Files and then type Adobe in the zone file name and touch open then I can browse the Adobe programs).
    5. I chose InDesign and press open.
    6. Then back in the editing window of action, I added '%1' in the application used to perform action text box, so that all read: "C:\Program Files\Adobe\Adobe InDesign CS6\InDesign.exe" '%1 '.
    7. I entered indesign in the Application text box and then click OK.
    8. InDesign CS6 will now open INDD files. Finally!
  • So, now that the iPhone 7 no longer a listener, how can we charge the iPhone and listen to music at the same time?  There is an adapter that will be a separator so that the two things are possible?

    So, now that the iPhone 7 no longer a listener, how will we be able to charge phone and listen to music at the same time?  Will it be a card which will be a dispatcher?

    You can use a dock of lightning to reload everything using plug the dock integrated headset for listening to music.

    http://www.MacRumors.com/2016/09/08/lightning-dock-iPhone-7-charging-with-music/

  • My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

    my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

    If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

    Good day.

  • in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

    in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

    From the link 'related items' below, see:

    Give your book a new internal ID.

Maybe you are looking for