Can only connect to wireless technology in some places far from the router

Similar Questions

• WRT150N wireless - download speed of connection is super slow when I move away from the router.

  I have a suggested internet high speed through Comcast, and my wired computer is get 6 download MBS. My wireless laptop is close when I'm a few feet from the router, but decreases significantly when I move out of the room - up to 200-300 KPS.

  I can't even watch a movie from netflix on the floor without stopping and buffering several times in a 1/2 hour show.

  Long-story-short: I expect too much on this Wireless N technology, or is there something wrong with my router, connection, configuration, etc. ?

  The strenth of signal on my laptop shows excellent quality for good, but the speed is terrible.

  Any suggestions / advice?

  JL

  It could be due to the wireless settings are on your router has its default value, which is the reason why you might be faced with the problem. I think you need to change some settings in your router...

  Connection to the router configuration page and then click on the tab below the Strip Radio Standard - 20 MHz and the Standard 11 - 2, 462 GHz channel change and wireless... Wireless SSID broadcast should be enabled and then click on save settings...

  Then click on the "Advance wireless settings" sub-tab and below change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• 13 - CL stream HP 110nr laptop: I can not connect to internet unless I'm right next to the router.

  I can't connect to the internet, unless I'm on top of the router. I walk 2 feet or less away and I lose my internet connection. I got the internet company come and check my router, I even got a new. It still does not connect.

  I have not had this computer for a year! It is useless unless I can connect to the internet.

  Can someone help me please!

  Thank you.

  Check the driver for the wireless communication update or uninstall the driver from Device Manager and download from hp.com

  See you soon

• Connection is de-energized when (not if) away from the router

  Hello you all fine technical staff.

  My name is Jake and I have a technical problem.

  So yes, the connection is either super slow or de-energized when I'm in my room. I am writing to you in the room next to the router and everything works A OK. But I'm going to the 7 additional meters to my room and the beginning of the problems. I have even a booster dose is plugged and it's on the same office that the laptop, but the problem persists. I'm getting full bars, but it still has problems.

  Is it maybe a problem with my wireless card? Or is there something interferes with the signal? Its a mystery wrapped in an Enigma, and I hope you smart people can help... Please.

  It could be many things, but first of all, I would recommend making sure you have the latest drivers available from the manufacturer of the system.  In this way you even if you have problems, you just the best possible start to their fixation.

  To do this, visit the Web site for the company that built your laptop (Dell, Asus, HP, etc) and go to the drivers/download section, choose your model and get the latest updates available for your wireless drivers.  This would not be a bad time to make sure that you have the updated Windows 8.1 and all other updates too.

• Can I connect to wireless networks far away?

  How to connect to wireless networks more away?

  Is there any way I can improve my reach wireless laptops so I can connect to wireless networks more away?

  Hello!

  You can only connect to wireless networks that recognizes the laptop. If the laptop recognizes a wireless network, you can connect to them. If he doesn t recognize (because it is further away) you can't connect.

  In addition, you cannot improve the scope of the laptop wireless. You can do it on a WIFI router, and not on the laptop.

  Good bye

• Can only connect wirelessly via Linux?

  I have a router Linksys/Cisco EA3500. I can connect to wireless internet, but no one else in the House can. They can connect to the router and they appear on the routing table, but they cannot connect to the internet. We tried to reset our modem and router repeatedly. Sometimes they access for a few minutes, but it then opens new.

  I am running Linux Mint 15, my wife and my mother have Windows 7 and my daughter has a Mac of some sort. We have also many android devices which doesn't connect either. I started my computer in Windows 7 and couldn't connect wirelessly. I went back to the Mint and had no problems.

  I tried to connect the Windows machine directly (cable) and it still does not work.

  What would cause a single device access while disabling for everyone? We have not changed anything recently, it just popped up out of the blue.

  Some providers of Internet services (ISP), especially cable companies, require you to register the MAC address of the modem, router or computer Ethernet card to access the Internet.  If you do not re-register the address MAC currently registered with your ISP, you can assign the MAC address, you are currently registered with your ISP to the router using the MAC address Clone feature.

  Try to perform the cloning of MAC address using your Linux Mint. For instructions, click here.

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• I can only connect to Windows safe mode. I get a blank screen otherwise

  Original title: I can only connect to my computer in safe mode. Start windows normally my screen begins to blink on the logon to the black screen. What should I do?

  I was told it had something to do with internet explorer and that I need to update my windows, but my computer won't let me.

  Safe mode is a number of things.  First, he starts using the clean boot programs needed to operate.  Second, he began to use a screen resolution 'safe' which is supported by all monitors (usually 640 x 480).  Your problem may be due to your video card being assigned to a resolution that your monitor does not support or does not reach.  If it is a recent development, the fastest solution may be to perform a system restore to a time before you had this problem.  You can do safe mode.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  Another suggestion is that, after the safe boot mode, change the display resolution (right click Desktop-> properties-> settings tab).

  If those who do not resolve your issue, you can use Microsoft System Configurator, msconfig, to choose what programs launch at startup.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  HTH,
  JW

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• Can you connect directly a Tablet wifi to your computer for the internet

  Can you connect directly a Tablet wifi to your computer for the internet

  Let me answer this way:

  Suppose you have a desktop or workstation that has a wired connection to the internet. Moreover, that this system also has a working wireless card. Another device with a pu wireless device to connect to desktop with a wireless ad-hoc connection. The desktop can be configured for connections to bridge the two and leave the system second to use "Internet connection sharing" to connect to the Internet.

  Start here:

  http://support.Microsoft.com/kb/306126

  Tom Ferguson.

• I can't connect to creative cloud, and so I can not install the Photoshop account I paid for.  I changed my ID adobe several times, but I can't connect to creative cloud, he always says I have the wrong password.  Help, please. Thank U

  I can't connect to creative cloud, and so I can not install the Photoshop account I paid for.  I changed my ID adobe several times, but I can't connect to creative cloud, he always says I have the wrong password.  Help, please. Thank U

  Hello

  Please contact the support.

  Contact the customer service

  Concerning

• Registry files have been deleted via a Norton 360 3.0 registry clean up - can't get an ip address from the router

  I'm running Vista Ultimate, -connection (Ethernet) with Verizon FIOS I ran a Norton registry clean and foolishly trust what he says to remove.

  At first, all of my USB cards have been screwed up (noted in the Device Manager with exclamation next to each one points)
  I did a system restore and that corrects this problem, but now I'm having a problem with my network card.
  , All diagnostic tests, etc. show that the material is very good. My router is also fine the problem is that windows can't get an IP address from the router and then assigns his own
  (a # 169 instead of a # 192)
  In the network connection properties, it says that the device is functioning correctly, and the driver is up-to-date.
  'Connection speed' tab: a window of diagnosstics is: I ran testto test adapters connect to connect to the network.
  Results: connection Test
  Test details:

  I have "this card is configured to obtain an IP address automatically. No DHCP server is present on the network. Windows selected an IP address by using the alternative private IP addressing. »

  X "Ping 0.0.0.0 Gateway: failure.
  !  "No DNS server is available for this connection.
  ! "No WINS server is available for this computer.
  X "Ping 0.0.0.0 network: failure.
  ------------------- -------------------------------------------------------------------------------------------------------------
  In this same window of diagnostics under the "LinksTab".
  Link current test status: (what is determine the current connection speed of the adapter and link partner)
  Results:
  ! The adapter is configured to negotiate the speed with the link partner, but 1000 Mbps was chosen as one of the possible speeds.

  The best link options-results of the speed test:
  ! Could not detect way reliable speed and duplex settings. Possible speed/duplex settings are 100 Mbps Full Duplex and Half Duplex 100.
  (Note that these link tests are online and I can't online)

  Also in the Diagnostics window-under the 'Cable' link cable - past-polarity is normal.
  Depending on the tab is the Hardware tab
  Hardware diagnostics check for I/O conflicts...
  Results: all the tests:
  EEPROM test
  FIFO test
  Test register
  Interruption of the tests
  Loopback test

  I also went in the prompt type in IPCONFIG... c which shows:
  Ethernet connection to the Local network card:
  ConnectionSpecific DNS suffix: (it's completely empty here)
  Link-local IPv6 address: fe80::bda9:951 d: 619f:a0dc 9%
  Autoconfiguration IPv4 address: 169.254.160.220
  Subnet mask: 255.255.0.0
  Default Gateway: 0.0.0.0

  I also have a sort of ping command here-cant remember the command, but the results were in the CBS... I didn't know how to reach. He however escape from something on the registry files.

  I went throughD-Link Tech router (router) support is good, Fios Tech support everything set up right, - Norton support(Norton denies that the files were not to be touched-although their report shows these registry files were deleted)-Dell Tech support because my warranty missed 3 weeks ago - although I still have the "your Tech Support team until 2013 - which is valid only if you have a hardware warranty-made no sense sold me the car without. the engine - directed the FTC to bring a complaint about it - after I get this fixed number.

  I hope someone can help... by the way I get perfectly in line with my laptop - I know this isn't my router. I'm sure it's due to some registry files being moved-(j'ai eu deles de messages d'erreur indiquant que les fichiers de Registre ont été endommagées ou manquantes) what do I do now? No system restore to restore this part of the register - I also installed the drivers from the dell drivers and Utilities disc - but maybe I've done that correctly? I put the disc - extract files-(he says they have been unpacked) was a new step for me to do after that? Help, please!
  Thank you!

  Hello
   
  We recommend that you install the router (see its manual) and the pilot of NIC once more and check the difference. In the first post, you mentioned that you decompressed or extracted files. Once the files are extracted, you will be asked to install the driver. However if you do not receive any prompts for the driver, then you will need to locate the destination folder where the files are checked to find the configuration file.
  
  Open the destination folder where the files are extracted and run the Setup file to complete the installation.
   
  To download and install the latest network card driver, visit the site Web of the manufacturer of the device or system.
   
  For more information on downloading and installing the drivers, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware
   
  I hope this helps.
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Can I recover my phone numbers of my Iphone 4 from the Cloud

  Can I recover my phone numbers of my Iphone 4 from the Cloud?

  Do you mean your contacts?

  Go to icloud.com and see if your contacts are there.  If so, you can recover.

• Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

  I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

  Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

  I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

  Someone, please help!

  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  Hello

  When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

  First step, log on to the HP support and download the latest drivers for your wireless card.

  The HPG60 is a very good phone but its wireless card has problems with old drivers.

  In which case it's a hardware problem, contact HP support.

  In general, you can use this process to find out what's wrong with the wireless.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• having a wireless connection can only connect at home, at work, he says internet explore cannot display the Web page

  I have a laptop when I use the wireless at home I have no problem, but when I use the internet at work I can not connect it says Internet Explore cannot display the Web page so I have no internet access

  Can you help me

  Try to run diagnose connection problem, if it is in the work, you will probably need to configure some additional things such as VPN or Proxy, try to contact your IT Department and ask them.