Can only connect wirelessly via Linux?

Similar Questions

• Can I connect wireless and cable?

  I work with a HP Officejet 6700 Premium, newly bought and installed in my older desktop that is wired. I would like to be able to print from my two laptops wireless as well. Is this possible? And if so, how?

  Hello

  HP Officejet 6700 can be wired to the office computer (USB) and can be connected wireless to other laptops. To install wireless, please see the link below.

  http://support.HP.com/us-en/document/c03086294

• I can't connect wireless on the stage of the boot

  Hi all

  I hope that someone can help.

  I have a Pavilion G6 2002au and he died,

  I am trying to reinstall the windows 7 Home premium 64 on that.

  I can't connect wireless on the stage of the boot, it off when I was running for a recovery.

  dose - does anyone know how this can be done so the I can reboot the system.

  Hopefully reinstall the wireless drivers?

• I can only connect to Windows safe mode. I get a blank screen otherwise

  Original title: I can only connect to my computer in safe mode. Start windows normally my screen begins to blink on the logon to the black screen. What should I do?

  I was told it had something to do with internet explorer and that I need to update my windows, but my computer won't let me.

  Safe mode is a number of things.  First, he starts using the clean boot programs needed to operate.  Second, he began to use a screen resolution 'safe' which is supported by all monitors (usually 640 x 480).  Your problem may be due to your video card being assigned to a resolution that your monitor does not support or does not reach.  If it is a recent development, the fastest solution may be to perform a system restore to a time before you had this problem.  You can do safe mode.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  Another suggestion is that, after the safe boot mode, change the display resolution (right click Desktop-> properties-> settings tab).

  If those who do not resolve your issue, you can use Microsoft System Configurator, msconfig, to choose what programs launch at startup.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  HTH,
  JW

• II had built my pc cleaned he lost my webcam and I can't connect wirelessly I'm curent

  I paid to have my computer cleaned and lost my webcam and I can't connect wirelessly

  Hello

  Why don't take you back to where you guessed it 'fixed '?

  If you have a wireless network, switch power switch make sure it is turned on

  and make sure you have the latest vista drivers/software for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  Is the same for your webcam a cam laptop builtin or external webcam: manufacturer of the laptop or the webcam manufacturer's website and search for Vista drivers and software

• You wanted to spend 5.7 LR LR 6. I told myself I can only do this via download, but I prefer to use a disk, as it is much more reliable. It seems that I can buy the full product at a greatly inflated price, of the likes of PC World, a disk - then why

  You wanted to spend 5.7 LR LR 6. I told myself I can only do this via download, but I prefer to use a disk, as it is much more reliable. It seems that I can buy the full product at a greatly inflated price, of the likes of PC World, a disk - then why not upgrade?  Adobe is not interested in amateur photographers? First Photoshop becomes CC only and now this; I also understand that certain features of LR 6.1 are available only via CC.

  The download will be always available if you ever need it again.

  The last download is available in the links here: Lightroom CC 2015.1.1 is now available

  Save links, rather than save the download.

• How can I connect rman usig linux

  Hi friends
  
  How can I connect rman using linux enterprice

  This is due to another also called linux program rman. To invoke the Oracle rman has provided, you must specify the full path to the binary file or make sure, $ORACLE_HOME/bin in $PATH at first:

  $ORACLE_HOME/bin/rman target /
  

  Best regards

  Maxim

• Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

  I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

  Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

  I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

  Someone, please help!

  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  Hello

  When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

  First step, log on to the HP support and download the latest drivers for your wireless card.

  The HPG60 is a very good phone but its wireless card has problems with old drivers.

  In which case it's a hardware problem, contact HP support.

  In general, you can use this process to find out what's wrong with the wireless.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Can only connect to wireless technology in some places far from the router

  My laptop, a Samsung with Windows 7, only connects to the internet in my room by the window.  The router is located in another room, but it doesn't connect when I am near him.  It shows that I am connected to the network, but I can't connect.

  Hello

  1. What's happening while you're trying to connect?

  2. you get any error message? If Yes, what is the full error message?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Follow the steps in the following article and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, please see the links and check if it helps.

  Why the my wireless signal strength is so low?

  http://Windows.Microsoft.com/is-is/Windows7/why-is-my-wireless-signal-strength-so-low

  Troubleshoot low wireless signal quality (applies to Windows 7 as well)

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• having a wireless connection can only connect at home, at work, he says internet explore cannot display the Web page

  I have a laptop when I use the wireless at home I have no problem, but when I use the internet at work I can not connect it says Internet Explore cannot display the Web page so I have no internet access

  Can you help me

  Try to run diagnose connection problem, if it is in the work, you will probably need to configure some additional things such as VPN or Proxy, try to contact your IT Department and ask them.

• Can I connect wireless and wired to the Airport Extreme even? My House has plaster walls that inhibit the signal and I move to my office.

  I have a good Wi - fi network at home using an Airport Extreme and Airport Express, but am moving my office on the other side of the House. The walls are plaster that inhibit the signal. Can I connect another Express to my extreme via an Ethernet cable for the office. I still maintain the wireless network. Thanks for your help.

  Yes, it's the right way to do things.

  Only the express will not extend the wireless... you create a wireless network of the same name and security settings... This is called roaming network.

• I can't connect wirelessly to the Internet, while other devices are able?

  I can't connect to the Internet with my laptop.  This began a few days ago.  But we can still connect to the Internet via a wireless router with other devices yet.    Page says "Internet explorer cannot display the web page. When I click on diagnose connection problems, he said that it is my router or modem.  But my other devices still work.  I try the other suggestions but they just get into a circle with no result.   Any suggestions?  Ideas with my veryyyyyyy limited knowledge of computers.

  I also had this problem, but my husband seems to have found the answer by searching other responses. The problem seems to be related to windows 8.1.

  If you go to control panel, network and internet, then network and sharing Center, click on your WiFi connection, and then select the power management options, you may find that the option to "allow the computer to turn off this device to save power" is checked.

  Uncheck this option seems to have solved my problem, because I had no problems since

• Photosmart premium C309g-m: I can't connect wirelessly to my printer

  Hello.  I can't connect to the printer using a wireless connection. I reinstalled the printer using the installation disc, but no go!  I followed the instructions also.  I do not use a router - use hotspot from my phone or wifi to a campground.  Thanks Bob

  Sorry, not supported on a hotspot.

• I can't connect wireless in my office, but I do connect to other wireless?

  I can to another wireless network and it works perfectly, but I can't connect to a wireless network in my office but other do.i traveled with the same wireless net work once and since then, so it can connect again. What is the problem? After a repair, he said "the problem with wireless adapter or access point.
  my computer laptop description are
  Description: Antheros AR9285 802.11/b/g/n/wifi adapter
  progress: Antheros communication Inc.
  version: 9.2.0.310
  supplier: Antheros communication Inc.

  Hello

  Try this link to several methods:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/using-a-computer-connected-to-wireless-Internet-as/5f012204-72e5-498C-AF24-4f11aa114a61

  B Eddie

• Hello world. I, m Bengt from Sweden. Can, t connect wireless epson printer for my aspire m1.

  Hello world. I, m Bengt from Sweden. Unable to connect wireless epson printer for my aspire m1. I tried the drivers of each possible site, epson, windowsupdate and more with no success. Can you help me?

  Great! There is a material error in the printer! I'm going to usb it for now. Perhaps by a new printer, later! Best regards
  Bengt
  Thanks for a good and fast support!