Connection is de-energized when (not if) away from the router
Hello you all fine technical staff.
My name is Jake and I have a technical problem.
So yes, the connection is either super slow or de-energized when I'm in my room. I am writing to you in the room next to the router and everything works A OK. But I'm going to the 7 additional meters to my room and the beginning of the problems. I have even a booster dose is plugged and it's on the same office that the laptop, but the problem persists. I'm getting full bars, but it still has problems.
Is it maybe a problem with my wireless card? Or is there something interferes with the signal? Its a mystery wrapped in an Enigma, and I hope you smart people can help... Please.
It could be many things, but first of all, I would recommend making sure you have the latest drivers available from the manufacturer of the system. In this way you even if you have problems, you just the best possible start to their fixation.
To do this, visit the Web site for the company that built your laptop (Dell, Asus, HP, etc) and go to the drivers/download section, choose your model and get the latest updates available for your wireless drivers. This would not be a bad time to make sure that you have the updated Windows 8.1 and all other updates too.
Tags: Windows
Similar Questions
-
I have a suggested internet high speed through Comcast, and my wired computer is get 6 download MBS. My wireless laptop is close when I'm a few feet from the router, but decreases significantly when I move out of the room - up to 200-300 KPS.
I can't even watch a movie from netflix on the floor without stopping and buffering several times in a 1/2 hour show.
Long-story-short: I expect too much on this Wireless N technology, or is there something wrong with my router, connection, configuration, etc. ?
The strenth of signal on my laptop shows excellent quality for good, but the speed is terrible.
Any suggestions / advice?
JL
It could be due to the wireless settings are on your router has its default value, which is the reason why you might be faced with the problem. I think you need to change some settings in your router...
Connection to the router configuration page and then click on the tab below the Strip Radio Standard - 20 MHz and the Standard 11 - 2, 462 GHz channel change and wireless... Wireless SSID broadcast should be enabled and then click on save settings...
Then click on the "Advance wireless settings" sub-tab and below change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...
Now let's see if you can locate your wireless network and try to connect...
-
Why the CTI will not go away from the next?
Hi all experts,
I want to assure you that all my clips are aligned side by side without gap. I voluntarily leave a slight space between 8 & 9 clip and move my left & placed CTI on clip 2 (ie the left opening)
So I test the function sequence > Goto Gap > following in the sequence but the CTI does not move!
Why the CTI doesn't move right away between the clip 8 & 9 clip?
Any ideas?
Thank you
Previous/next in the sequence will work only if there is a gap through all the titles in a sequence, video and audio. Instead, try next/previous on the track and make sure all (or part) of your tracks are targeted in the headers of the track.
-
Monday Nite I downloaded a driver site HTC syn my Android Hero phone. After extracting and installing the driver in the zip file, I tried to sync with my phone which was hook up my laptop. It did not work. Interrupt the synchronization process and I tried to check my email from outlook. Found it cannot send and receive mail. Open my browser and found that it disconnected. And so, using the LAN cable, fortunately, it worked. So I wonder what is happening to my function wireless on my laptop?
Can someone tell me what I need to do? Thank you very much.
Hello
Search for updated drivers and reinstall if no later by using the procedure below.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Can only connect to wireless technology in some places far from the router
My laptop, a Samsung with Windows 7, only connects to the internet in my room by the window. The router is located in another room, but it doesn't connect when I am near him. It shows that I am connected to the network, but I can't connect.
Hello
1. What's happening while you're trying to connect?
2. you get any error message? If Yes, what is the full error message?
Please follow the steps below and we update with the results.
Method 1: Run the network troubleshooter, and check.
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
Follow the steps in the following article and check.
Windows wireless and wired network connection problems
For more information, please see the links and check if it helps.
Why the my wireless signal strength is so low?
http://Windows.Microsoft.com/is-is/Windows7/why-is-my-wireless-signal-strength-so-low
Troubleshoot low wireless signal quality (applies to Windows 7 as well)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems
10 tips to help improve your wireless network
http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Let us know if it helps!
-
the wifi does not work on my iPhone when I'm away from the router in my room, but it's not too far, it's like a couple of inches away from the living room and it does not work for some reason...
First restart the router - remove all power for 15 to 30 seconds.
If that is fixed not try to change channels on the router using the router configuration panel.
On the phone go to settings/general/reset - Reset network settings if any of the above doesn't help. It will be reentering your WiFi password.
-
When using the Ctrl-alt-delete option and the Manager tasks appears it seems without borders. The task manager remains after the programs are all closed and will not go away, unless the computer is off.
It's called mode 'small footprint '. Double-click anywhere on the border of the Task Manager window and you will get the Menu bar in the rear.
-
blocking confirmation dialog when you navigate away from pop up
Hello
In space, we have a pop-up that displays the search results in a custom component that allows users to search for employees. We would like to navigate from the name of the employee found to his profile page. I set up a go-link, which works, but when browsing the pop-up window I get a dialog box top of the page asking the user to confirm that it navigates away from the pop up because it will be closed after this action. We want to block this confirmation dialog box. Any ideas on how to do this?
Thank you for your help,
Christa
Hi Christa,
To resolve this problem, do not add the code in the page of your component, it should be on the page of the spaces.
For example: you have moved and abandoned your component on a page that is created in spaces on the run.
Lets say that the page is Page11.jspx (you could see the name in the URL of the page)
Step 1-> export MDS and locate the page, the path will be ususally look like this if you have created a page in SPACE
/ oracle/webcenter/page/scopedMD/s8bba98ff_4cbb_40b8_beee_296c916a23ed /.
Step 2-> to the page that you want to add this component and add the code above.
Step 3-> import back to MDS and check your feature now.
-
Using my current ID and password I can connect to Adobe. When I try to download the upgrade to Flash Player they ask for my ID and password. When I insert my current ID and password, it is rejected. How can I fix this problem? Is it a bad sign in a former ID, and/or an old password associated with Flash Player?
The password is provided by the operating system and is designed to protect you from accidentally install software. You will get this prompt for any installation outside the context of the App Store.
If you do not need to enter a user name or password when you start your computer, you can probably just leave the password field empty when recognizing this prompt.
-
Can I print a CD instead of a printer information when I'm away from my printer?
Can I print a CD instead of a printer information when I'm away from my printer?
Can I print a CD instead of a printer information when I'm away from my printer?
You can use PDF reDirect to print files and later print these files on your printer.
-
I use Outlook as my main e-mail client, but I have access to my email address when I'm away from my computer with Hot Mail.
When I do all of my incoming emails go to the "Deleted" folder instead of the "Inbox".
Please notify.
Bob BurnsAfter all the Hotmail issues in the appropriate forum found here:
http://windowslivehelp.com/ -
OFFICEJET 3830: How print on my printer when I'm away from him?
How to print on my printer when I'm away from him?
Hello
To print remotely when you are outside your range of wifi at home that you need to us ethe eprint feature that allows you to send content to your unique printers Correo electronico - it will display some conetent is sent by e-mail.
I've included details on the Setup here.
-
When I download PDFs from the internet to my documents, they get there but does not open.
Download Adobe Reader; Uncheck the box first the Google toolbar:
How to set file Associations:
http://articles.TechRepublic.com.com/5100-10878_11-6172036.html
How do I... Change file extension associations in Windows Vista?
See you soon.
Mick Murphy - Microsoft partner
-
I forgot my Hotmail password for access when I'm away from home.
When I was away from home recently, I couldn't remember my password to access my Hotmail emails. How will I know what it is?
You forgot my password option to retrieve your password.
-
Recently, when I download files from the SD card, LR6 not rename the files. How can I fix it?
If I open the folder, not through Lr, I can rename the file. Now, the problem disappeared. Maybe it was related to the DD. I removed and put back in place the protections in SD via the menu of my camera and the problem disappeared. Now, he works as usual. Amount and rename the files by LR. Thank you for your interest
Maybe you are looking for
-
How to install Windows XP on Portege S100 home after HARD drive crash
In my laptop s100-s1133 of a HARD drive crash. I buy a new one. Now, I can not intall OS (Windows XP). Windows is not installed, because it does not find my HARD drive. I got downlad drivers for toshiba (Toshiba RAID driver for XP (v1.3.8.0, 10/04/20
-
Refresh rate of the monitor 2310 m HP and how to set?
This may seem a stupid question, but I agree with the idea that there was no matter what stupid questions, people simply stupid. What is the refresh rate of the 2310 m, and how can I make sure that my PC card and/or graphic is set to the appropriate
-
Malwarebytes crash showing MSVCR100.dll as the problem (logs attached events)
work on a computer running windows 7 Home premium 64-bit, and according to the owner on the 16th malwarebytes began to break up the dialog box just says that the program had planted and windows must close, no information error or something. so I pull
-
Windows 7 wireless connection problem: unable to connect to my home network
Hello I just got a Dell laptop that is running Windows 7. However, when I try to connect to my home network it impossible apperantly. When I select "Troubleshoot Proplems" I get "Troubleshooting cannot identify the problem." I also already checked
-
Muse 2015.2 work terribly slow
Hello!This is my second post today, while I solved my first problem, this is bugging me for a while now. I use Muse a lot, I design themes of muse and Web sites for the company that I work. Recently, I switched to an iMac 27 "a lot more low spec PC.