Satellite L350 won't start or recover using the recovery disks

Similar Questions

• Re: Satellite Pro A210, stil does not start after you use the recovery disk

  Hi, my computer laptop girls stopped booting, I tried everything to fix this, but it seems to be on a loop.

  He runs the repair of your computer, but after a while, I get the message, this computer cannot repair this fault automatically (or something similar), there is also a message that says - if you have connected a camera or to this computer's portable music player, remove it now and restart.

  I tried to start in safe mode, safe mode with command prompt and last know good configuration but still no joy, so I eventually ran the recovery disc. Once it was finished, I was to square.

  Does anyone have an idea of what I can try next - other than to throw it out the nearest window.

  Thanks in advance.

  Hello

  Never heard talk of this error but sounds strange
  If I understood your first assignment; you were able to complete the installation of the OS from the recovery disc. Is this good?

  Well, in this case the HARD disk must be OK because the files were copied correctly

  I searched a bit in google and didn t have found a solution to 100%.
  Some have said that new OS install should solve this perhaps you could use clean up Windows Vista, Win XP disk

  You can also try to format the drive HARD integer first. Delete all partitions on the HARD drive, and then try again

  PS: You can check the HARD drive using the + Hitachi Drive Fitness Test. +
  Its free tool. You can find using google

• ERROR: F3-FFFF-0013 while using the recovery disk

  Hello everyone

  I m having a problem recovery my computer. I have Toshiba Satellite A100-va7 or something like that and now my computer won't start so I used the recovery disc fully format the system and start over.

  He gets up to 90% on disc 2, after copying the files and others and I get this error

  F3-FFFF-0013

  And it says press on enter to shut down the computer and nothing happens, and it keeps restart and reboot after that.

  I tried to use the disc of recovery twice and the same result every time. Is there a way I can fix it?

  Hello

  If you put this error message into Google, you will find this document http://209.167.114.38/support/techsupport/tsbs/all/-TSB001414.htm

  Maybe this will help.

• How to recover files before using the recovery disk?

  Hello

  I have a Toshiba Equium and when I turn it on it loads the screen where you log does not appear, it has a black screen with a mouse, and I need to use the recovery disk to get back to normal, but I don't want to format the hard drive that I have a lot of files so it is anyway to recover the files?

  Hello

  In my opinion the easiest way is you remove the laptop HARD drive and put it in a box external HARD disk. Then, you can connect this external HARD disk to a different computer now and have access to the files on your HARD drive and you can perform a backup.

  An alternative you can boot from a Linux Live CD and back up your files on a different USB devices.

• Satellite M300 - how to use the recovery disk

  Hello world

  I was wondering how to use the 2 recovery discs that I burned recently if I wanted to fix my USB ports (as seen in my Toshiba M300 - wire to USB ports)

  Any suggestions?

  Hello

  You can use the only recovery disk to reinstall the whole OS!
  This means that the use of the recovery disk will format the whole HARD drive and will set the laptop back to factory settings!

  If you want to use the recovery disk and then insert it into the ODD and the start-up of this disc.
  Then the installation of the OS should move forward and you should follow the instructions on the screen.

  All that s

• Satellite U300 - how to use the recovery disk?

  I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
  I really need to fix my cause cell it's time to review!

  Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

  Thank you!

  Hello!

  If you have inserted the recovery disc you must only start her everything that s!

  I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

  Good bye

• Satellite A300-1mz I use the recovery disks after an upgrade of the HARD drive?

  I'm upgrading the disk hard of my * toshiba a300-1mz *, but I am sure that I can use the * recovery disks * marked the first boots to the l.o. (vista)

  I expect your support...
  Thank you very much...

  Hello

  Yes, you can do it!
  If the HARD drive has been recognized by the BIOS, then you should boot from the recovery disk Toshiba in order to reinstall the operating system which has been pre-installed by Toshiba.

  Welcome them

• Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

  I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

  How can I fix my computer!

  Any help would be greatly appreciated.

  Have you tried to format the HARD disk until you try to use the recovery disk?
  Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

  But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

• F11 not opening and cannot restore using the recovery disk

  Hi I have a HP dv4 2106tx model recently I am facing a lot of problem on my OS so I decided to restore the system using the recovery disk that I created earlier when I purchaced my laptop recently.

  to restore when I restart my system and pressf1 systemdoes not open a windo recoveryrather it boot directly to the windows.

  on my hard drive that I have the recovery partition, even I am not able to restore my system.

  When you restore the system to factory settings using Recovery Manager of cyberlink it is said that to recover the factory setting system needs to restart on reboot it does not at all.

  so please find me the ways to restore my system.

  Thank you

  Put 1 of all the recovery CD in the drive power on and press F9 repeatedly when you see the HP logo, and then select the reader of cd/dvd in the startup list, when it appears, it should start the PC from disk 1 and start the Recovery Manager.

• Desktop HP pavilion s5-1540: using the recovery disk

  I have the recovery disc I made when I got this pc.

  Now, I need to use.  I started the pc with the disc, but nothing happened.

  Can I get advice on how to use the recovery disk?

  Note.  I'm not very computer savy.

  I sent my pc in for repair to a place of repair no HP (insurance).  They have installed a generic operating system but there is no program file.  I want my pc as it was when I got it.

  I can't get these disks to run.

  any help is much ajppreciated.

  Insert the recovery disk 1 in the drive, restart the PC, when you see the HP logo screen start to type F9 on the keyboard, this should load the Boot Manager, and then highlight (using up/down keys) internal CD-ROM drive cd/dvd and press ENTER, it will now boot from the recovery disc 1 and we hope to start the restore process.

  It is a long process not to disturb the tactile keys or pc, while he recovers, it will reboot several times on his own, you know when it is done when it asks you to set up the pc for first time use.

  Make sure that the recovery discs are clean before you start.

• Sony vaio fw Series notebook PC hangs after complete recovery using the recovery disk

  I have sony vaio fw notebook computer series. the problem is that a week ago my laptop keyboard did not work properly, his work of sttops not all but a few keys and I stop directly by using the power button / stop and then I turn it on after day and the computer started to freez. I though I could get rid of this by restoring the complete system and I did it by using the recovery disk that I created at the firrst time I've had this laptop. during the recovery process, my laptop crashes twice but in any case, I managed to do thanks to a system of complete restoration and after that when I turn on my laptop, then it worked fine for 10-15 minutes but after that it started to freeze up again. I had to stop it again using the button / stop and it happened about 5 - 10 times, after that I decided to do a full restore using the restore disc. as I was doing that the process is not complete because it crashes when I do this. Finally, I managed to do a full system restore after more than 10 + time and guess what it lights up then my laptop crashes completely. I can't open anything... mouse works very well but if tried click on any program then you can not click on it, please help what should I do now... p.s, my computer works fine in safe mode with networking, but in normal mode its completely freeze

  Hello

  Go to the Sony website and download the latest Vista drivers for your model.

  http://eSupport.Sony.com/us/p/select-System.pl?model_type_group_id=10

  If the problem persists after that, you may have a hardware problem.

  See you soon.

• Re: How to get Corel WinDVD without using the recovery disk?

  The update for Corel WinDVD was rather messy and because of this some owners laptop uninstalled to try to install the new software. Now, we ended up with the only possibility of an image recovery, which, in practice, means losing the software.

  Updates for the Bluetooth and wifi are also pretty messy.
  Is isn´t possible to get this software back without using the recovery disk?

  As you probably know recovery image installed on Toshiba laptops is a kind of software that includes the operating system, drivers, tools specific to Toshiba and utilities but also some additional software like antivirus or DVD player application.

  All drivers and Toshiba tools and utilities are available on the Toshiba download page, and if you want to install the version of the OS, you can download each of them.
  This additional software is not available for download. It's a kind of gift on the owner of the laptop because as the new owner, your machine must be ready to employment with full protection and opportunities to use multimedia content.

  If you don't like it, you can remove the system and use your own applications.

  Summary: this software cannot be downloaded separately and if you want to have it again, you must install original image of recovery designed for your machine.

  If you have any other questions do not hesitate to ask.

• Question aboput using the recovery disk

  If I use the recovery disk, it will remove the Toshiba assist installed on my pc? I don't have the tools and disk utilities.

  Thank you

  Using the recovery disc disc HARD integer will be erased but it is applied to factory as from the date of purchase. This means that everything will be installed again (all drivers, tools, and utilities).

  The laptop will be as good as new. And of course Toshiba Assist is part of the recovery image and it will be there again.

  Good bye

• How do you reinstall to factory settings using the recovery disk

  Hi, I created the set of recovery disks. Can you please guide me how to reinstall to factory settings using the recovery disk.
  Thank you

  Put the first disc in the CD/DVD drive.
  Turn on the device, press F12, choose ODD as device boot and boot from the CD/DVD drive containing the recovery disc.
  Follow the instructions on the screen.

• HP Pavilion p6290d: change to smaller capacity desktop hard drive using the recovery disks

  Currently my hard drive (750 GB) is having a problem. I have a spare hard drive (500 GB), I can replace the 750Go with the 500 GB hard drive using the recovery disks that I created when I got the pc?

  Hello:

  All I can say is that you have nothing to lose to give a try.

  500 GB could be sufficient to allow the recovery discs, you did to work.