Can Satellite Pro U400-13I - I reinstall the CD/DVD creation software?

Similar Questions

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro U400 freezes sometimes when the power cord is plugged

  Hello! I know that this problem has been addressed here and there, but I'd like to open a new thread about it. Here's the scenario.

  I recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original, (b) in addition purchased authentic of Toshiba PA3636U-1BRL, 7200 mAh. The laptop has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I use XP Pro SP3 (own installation by myself). Everything works fine, except for one thing:

  Sometimes (but), when the laptop is running on battery power and I plug in the power cord, everything hangs and I have to restart. A few observations:

  It tends to occur more frequently when the low battery alarm has rung;
  (b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery.
  (c) it seems to happen most often when a USB device (mouse, for example) has been linked to the laptop, but it is not a rule;
  (d) it seems to happen less often when I move the mouse USB at the time wherever I am connect the power cord.
  (e) I've experimented a lot with Toshiba PowerSaver settings (for example to change the levels of CPU for my profile) but nothing I changed seems to change the situation.
  (f) I tried different suggestions I found on various forums, but nothing works (for example the BIOS settings);
  (g) otherwise, I can say that I have not really seen a smoother computer, everything works really fine, no other problem :)

  Everything that makes me think it must be some sort of bug in the drivers of motherboard driver PowerSaver or other drivers interact with battery, CPU or possibly USB. Y at - it an explanation to this problem and can it be rectified in some way (for example, by providing a driver update)?

  Hello

  First of all, I never heard a driver from the motherboard.
  There is a drive chipset or a graphics card driver. There is no such thing as a driver of the motherboard!

  Look, man. laptop should work fine even the AC adapter is connected or not connected
  If the laptop freezes while there might be a software problem, but in my opinion it could be hardware problem
  You must reinstall the operating system if the laptop would freeze always the issue might be related to hardware

  First of all the memory modules and AC adapter must be verified.
  If the problem persists even using new modules and AC adapter, motherboard may be affected.

• Satellite Pro U400-11V - Installation using the floppy from XP downgrade

  Hello

  Yesterday I had to replace my HARD drive once it is simply dead.
  I didn't know it was a big deal that I had lost any data.
  I would just like to re - install Windows XP using the Downgrade XP disk came with the laptop.

  It turns out that: I have about 10 discs Downgrade XP each almost identical looking and everyone, I assume, associated with a particular Toshiba laptop my company bought at some point.
  Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V.

  What I did:
  -We selected at random.
  -Installed Win Xp Pro.
  -Tried to activate Windows.
  -It indicates that the product key is bad (and some drivers are missing, so it is obviously not the disc that came with the laptop, but he got me so far).
  -Correct the product key according to the key that is located on a sticker at the bottom on the laptop *.
  * On the sticker, this key is an OEMAct Windows Vista Business key, the OS of the laptop came with.
  -L'activation of Windows will not accept the key to the sticker.

  So I have 2 questions:
  1. is there another method of re - install Windows XP Pro using the * original * Downgrade XP disk that came with?
  2 (leading to #1) is it possible to identify which drive is the one shipped with my laptop? Perhaps by checking some serial numbers on the disc?

  Worst case scenario I'll have to make (at most) 10 Windows installs until one works.
  But I was really hoping some help & advice.

  I can't wait to hear all the answers,
  Thank you!

  Hello

  > I have about 10 discs Downgrade XP each almost identical search and each, I presume, associated with a particular Toshiba laptop my company bought at some point.
  > Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V
  Your ad is really funny :D

  I put t know how your Win XP drive looks like. My laptop came with the recovery disk and it was mentioned on the label that it's Toshiba recovery disc.

  In addition he s already enabled so I put t need to activate the operating system by using this key.
  Also, the key at the bottom of the unit belongs to the preinstalled operating system and it will NOT work with the new Win XP or another operating system.

  But back to your Win XP disks
  I recommend that you check the single disc... maybe a disc is already activated

• Satellite Pro S500-10F - cannot reinstall the operating system

  Hello

  I have a Satellite Pro S500-10F provided with Windows 7 Professional with downgrade rights (and DVD) to XP Pro. I downgraded to XP Pro and everything worked fine (I did it on a number of similar machines).

  Then Windows started to have problems and crashing with BSOD. I decided to rebuild the machine to reinstall Windows XP Pro from DVD supplied with the machine. The thing is it gets 2% and then gives the BSOD.

  I thought it was the hard drive because there was some disk errors when it removed and put it outside of another machine, so replaced. Still the same problem. I tried to connect external USB DVD drive and boot from that. He did indeed start the external drive but then for some reason, try to copy the files of its own DVD player. I tried to reinstall Windows 7 Pro of the DVD to the top together, I created, this failed. I tried to install Windows XP Pro since version box and have failed.

  At this stage do not know if DVD player or what. He tried to build start player flash, but even if the system seen as boot option, then tried to boot from the network?

  Any help much appreciated.
  Thank you
  J

  Hey Buddy,

  To be honest I put t think that it is what you can do. You have tested the recovery disk and a new HARD drive, but the same happens. So that would mean it's hardware related problem.

  TOSHIBA recovery disk contains an image pre-tested all drivers and tools. This means that you can still install Windows recovery disc and it will work. If it's not (like in your case) it something wrong with the hardware.

  If your laptop is still under warranty valid, you can bring it to a service provider allowed in your country and guys can fix this for free because of the guarantee. Get in touch with technicians and explain your problem, they will sort it out for you. ;)

• Satellite Pro U300 - how to reinstall the system from original Vista operating?

  My Satellite U300 (bought in 2008) came with Vista and a fallback to option of XP pre-installed. I drove back to XP at the time. Now, end of support from Microsoft for XP, I would like to re - install the Vista operating system.
  I have the recovery disks, but there is a wizard to help the resettlement?

  Or is there a function to restore to original factory setting, which I guess would be Vista? (I backed up all my files where a clean install is required). Any help appreciated, thanks.

  I checked the specifications of the laptop and this laptop model was offered with Vista preinstalled and DVD recovery Windows XP Home edition. In General original recovery image can be installed with the recovery disk. You got laptop with Vista pre-installed (without the Vista recovery disk) allowing you to create the Vista recovery disk using the preinstalled Toshiba Recovery Disk Creator.

  There is also the option of HARD drive recovery, but it works with the factory only settings. After installing WXP that this HARD drive option will not work more then now you Vista recovery DVDs. Unfortunately in your ad I didn't understand whether or not you have the Vista recovery disk.

  If so, just start your laptop and press F12. When the boot menu appears put Vista recovery disc into the optical disc drive, has chosen the CD/DVD on the list in the menu and press ENTER. ODD will start to read the recovery disc and all what you need to do is follow the menu on the screen.

• Satellite Pro L300 - where to get the recovery DVDs

  Hello

  Can someone help me please.

  My satellite pro L300 laptop has crashed I have repaired.
  Unfortunately, I have no operating system such as Windows Vista recovery disk.

  I can't find how to get these discs on Toshibe website or to be honest, that these disks are correctly as.

  Any help would be appreciated...

  Hello

  The laptop supports recovery of HARD drive option. This means that you can reinstall the image of Toshiba without using the recovery DVD. You must boot up the laptop and press the F8 key. The advanced boot menu is displayed and there you choose the first option to fix my computer. Then choose recovery Toshiba (last option) and start the installation.

  After this installation, you can use the Toshiba pre-installed called TOSHIBA Recovery Disc Creator to create an own recovery DVDs software of engraving

  But if you have formatted the HARD drive, the repair option won't work because the recovery folder has also been removed. In this case, you will not be abele to create clean restore DVD.

  But you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite Pro A300 wrong interpret all THE CD/DVD

  Hello

  I need help!, I have a Satellite Pro A300 equipped with a multimode GSA - T50N (RT04), DVD player, but it does not work.

  The drive appears as DVD RW drive (e :))

  If I put a DVD or a CD player will not autorun and will, say something like 0 bytes free 645 MB (for example), when I right click on the drive icon and select Explorer, I get a message "prepare this blank disc.
  It doesn't matter what kind of media, I put in or even if its Blanck, formatted, a cd of music etc the size 0 bytes free of 645 (can be anything) is always different, but always appears the message "prepare this blank disc.

  How can I solve this that the laptop is totally useless without the player works correctly.

  Scott

  I had the same idea

  I recommend first of all remove all the system burning software.
  Go to Device Manager, and then remove the drive from CD/DVD to the list of devices. Then start the registry and go to completely remove the Upperfilters and Lowerfilters from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the device and wait for the CD/DVD drive was recognized again

• Satellite Pro U400 - how to upgrade the BIOS from 17/07/08

  I downloaded the update to the bios - the following file: bios - 20080717104036.zip
  I unzipped. But the way I did it twice and then I can not find the file to install this update.

  The first file of the sip consists of another zip file and in the second, there are 3 foulders: BOOT, EFI and SOURCES and 1 file BOOTMGR that is not a program.

  Can someone tell me what should I do with this update in order to install?

  Hello, Olga

  Updated the BIOS, you can use 3, 00 - WIN version. Extract all the files listed on the desktop, run WinPhlash.exe. Update BIOS version WIN can be done under operating system running.

• I lost Windows Vista on Satellite Pro U400 - how to get the original configuration

  All;

  I missed upwards at the start of my new laptop... I fail to use Vista.
  So I used the system recovery DVD. a version of Xp installation crashed the Vista partition!

  How can I get the original installation of this machine...?

  Any help is welcome...

  Kind regards...

  Hello

  Try with https://backupmedia.toshiba.eu/landing.aspx

  Good bye

• Satellite Pro A60 does not recognize the accept/DVDs blank

  My computer will not accept blank CD - R disc so I can burn data on them, but my computer will not accept blank DVD discs that I want to be able to use to store more data.

  In the drive of my computer D reads "DVD - RW", I guess so, but am not sure that this means that my pc should be usable with DVD-R and DVD - RW discs but it do not accepts / acknowledges these when I put a try to burn something on them.

  My computer also does not accept / recognize DVD + R Virgin discs as I have tried those, just in case they might work.

  Help please!

  Post edited by: EDS

  Hello

  Have you also tried to burn DVD-R discs?
  I had also some problems with DVD + R discs, so I changed to a DVD-R and since all works well! :)

  I don't use Windows Media Player to burn discs, I use CD Burner XP. It is a freeware tool, very small and fast. It works on most versions of Windows, and you should try it too!

  Also check the Toshiba page for an update of the firmware!

• Satellite Pro A120 - how to replace the CD/DVD drive?

  Hello

  My DVD/CD drive does not work much more and I want to replace it, but cannot find a way how to remove it from the drive. Anyone able to help me with that? Which screws I need to remove and where? Thank you!

  Hi caribman,

  As much as I know the ODD of replacement is not so easy. The drive is secured by a screw and to remove this screw, you need to remove the keyboard and the other parties as well.

  In my opinion, this should be done by a technician of laptop because it s a delicate procedure. It is not as easy as on the desktop, so I would contact a professional help

• Satellite Pro U400-153 - replacement HARD drive

  Hello

  I need help with a new hard drive for the Satellite U400-153. My wife and I have a laptop (canada) U300 as well with a hard drive of 160 GB and a laptop U400-153 (europe) with a 120 GB HARD drive. I wanted to put the larger HARD drive in the U400 but the screws that hold the HARD drive in the laptop are closer together on the 160 GB HARD drive as this 120 GB HARD drive and so I can plug the HARD drive, but I can't replace the casing on the bottom of the laptop. I want to upgrade and put in a new HARD drive, but I can't seem to find any info on weither all readers will be the right size. will be the screws on this form? How will I know

  http://www.ebuyer.com/product/219414
  MK3265GSX Toshiba 320 GB 2.5 "hard drive SATAII 5400 RPM 8 MB Cache - OEM

  Does it matter what company it comes? I thought I got it was weird that the Satellite U300 would not transfer more easily.

  If anyone has any ideas please let me know...

  Thank you

  Hey,.

  Theoretically, you can install each HARD drive with SATA 2.5 form factor interface in Satellite Pro U400.

  If you install a new HARD drive in Satellite Pro U400, you must use the old disk cover/case HARD to install.
  I put t know what you mean exactly with that, but maybe you can upload a photo to make it clearer.

  Finally and above all it doesn t matter what company it comes. You can use a Toshiba or another company HARD disk too like Western Digital, Seagate, etc..

• Satellite Pro U400-130 - "Please wait" is displayed during startup

  I brought a new laptop Satellite Pro U400-130.
  While the l' interrupteur switch on the laptop, each time between the initial screen (vista logo) & the Welcome screen, please wait for t0 60 63 seconds continuous screen is this normal.

  Maybe its waiting for a network connection? Try to disable network devices in Device Manager and reboot.

  Or if you have installed an antivirus program, check that its not not looking for a floppy disk at startup drive.

  Vista event viewer can tell you which delays the startup process.

• Dynadock and Satellite Pro U400-135 - external monitor question

  Hello.
  We have a serious problem on the 26 dynadock vga e Satellite Pro U400-135 unit

  The problem is:
  If set to host as a single external monitor during startup frequent windows loses resolution external monitor.

  Example of resolution monitor post seting like 1280 x 1024, start with connected dyndaock, frequent resolution 1280 x 800 not correct and external monitor image not correct.

  Operating system is Vista 32 bit, driver dynadock is 2.3 update and dynadock displaylink displaylink site 4.6.16208 site.
  Same problem with Windows Xp 32 bit.

  How can I solve the problem?

  Hello

  If I understand the first message, external monitor resolution automatically goes to 1280 x 800 even if you set it to 1280 x 1024.
  I guess that your external monitor is connected to the dynadock.
  Is this good?

  AFAIK, you can customize the video settings of the dynodock.
  It provides a video output in two modes: Mode and extended Mode of mirror.

  Mirror mode creates an identical display of your computer to the external monitor screen. In mirror Mode, the dynadock automatically selects the settings (screen resolution, color quality and discount rates) for the external monitor that will allow the best resolution based on your computer's settings.

  Maybe you use the mirror mode and therefore the dynadock the resolution automatically because it of the best for the external monitor.

  I recommend checking the Dynadock manual for more details.
  There are two modes are described there.

  Welcome them