Can someone tell me if the accounts with PHD Mobile finally works?

Similar Questions

• Live stream 8: can someone tell me if the Stream 8 should charge when it is turned on.

  Can someone tell me if the Stream 8 should charge when it is on and the unit is plugged to the power source. Mine only supported when the system is off, I thought that it used to charge when it was pluged. It also seems to go through the battery very quickly compared to what he did when he was on the window 8. In addition, I don't always get a full reload during the night. Any help would be greatly appreciated. I looked at a few Utubs and these review not be complaint not about it after the side step for windows 10

  Hello rhoisy,

  I have a couple of flow 8, with 10 Windows. I have no problem with her charge on or off.

  What charger do you use? It should be a 2 amp. If it's a phone with a lot less amperage charger, this could be a problem. In addition, some have reported that if they do not use the usb cord that is appropriate, it will reduce the power and charging problems cause. Its own cable is thicker than use some phone chargers and not more than 2 feet in length.

  Other that that, I missed all the problems you encounter.

• When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its id.

  When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its ID thanks

  It seems that if the application has been downloaded on his iPad while it is connected to your Apple ID. If so, he'll always want to be updated with your Apple ID.

  You must remove the application from his iPad and then download it again while it is connected to its own code of Apple.

• Can someone tell me where the mailsent.log has been archived?

  I checked my mailsent.log and I can't find where the archived file.

  Can someone tell me where the mailsent.log has been archived?

  First, go to the ColdFusion Administrator and check if the option 'Save all mail messages sent by ColdFusion' was checked. The file mailsent.log must be in {directory ColdFusion or cfusion} /logs/

• Can someone tell me what is happening with my Satellite A30?

  Can someone tell me what is the problem with my computer laptop satellite A30 514 is? The problem is that my laptop is very easy get hot and the fan never stop turning after 15 minutes and I continue to use the laptop about 1 hour, I guess that the laptop GET overheat auto power off.
  Help me to know what is the problem.
  Thank you.

  HI Yves,

  It sounds like overheating to me. This is usually caused by a build-up of dust in the cPU-heatsink which keeps air from cooling fans to pass through. You can try to use a hose of vacuum cleaner against the bars of suction air suction debris.

  Kind regards

• Can someone tell me about the GPS?

  I install the GPS of ThinkVantage software, but he told me that there is no GPS hardware?

  and install it using the script will install the software, but when it works, it seems "cannot communicate with com port.

  My W500 model is CTO 4058, and can someone tell me how to set up the GPS?

  Hello Whitebob,

  Yes you are right! Please look here, it seems that a sim card must be in the card reader.

  Also, consider the hardware switch.

• Can someone tell me please the difference between...

  Hello

  I was going to buy the Envy 14 but recently on the refurbished HP UK site and found the Envy 14 with a huge discount contrary to what I was willing to pay. The only difference between the two is that the nine is a desire 1190ea refurbished is a desire 1050ef, my question is obvious... What is the difference?

  I would also advice on the purchase of a laptop used... is - this risky? is the macbook pro a better option?

  Any advice/help is greatly appreciated.

  Thank you

  Hello:

  Because I don't know how much difference of cost that you look at, I can't help you there.

  But I can give you this link to a comparison side by side 2 processors, and you can decide for yourself if the one with the fastest processor is worth the extra cost. They are of the same family. Basically, we're just faster than the other.

  http://ark.intel.com/Compare.aspx?ids=49022, 50179,

  Paul

• I can't set up a new account with T-Mobile 4G

  I have recently buy a slate of 10 HD 3600 us with Android JellyBean and I was just the initial game upward. Instructions to set up a new account 4G with T-Mobile seem simple enough in the tutorial:
  
  http://WWW8.HP.com/us/en/ads/free-mobility/overview.html?JumpID=va_r11260_go_freemobility
  
  BUT THEY DO NOT WORK ON MY TABLET! So I unplug my Wi - Fi tablet, went to Chrome, and that's all I ever get:
  
  You are in offline mode
  
  A Wi - Fi connection and mobile data are turned off.
  This page can be loaded once you connect to a network.
  Error code: ERR_Internet_DISCONNECTED
  
  I tried different cities, just to check if the T-Mobile signal was weak, where I live, with the same results. Could there be a problem with my SIM card?

  I saw in Amazon.com that I was not the only person having problems with implementation of this 4 G with T-Mobile account.  So I finally got a hand on Amazon and HP technical support, and the later explained to me that:

  "As you use the SIM card that is T-Mobile, you must activate the mobile data connection. You can enable it from the setting of the notification. In the top right drop-down menu panel. »

  So if you go to home page main of your device and make your finger down on the upper right corner, there is a menu with different options in the device settings. And of course, there is a T-Mobile utility that allows you to transform the mobile data. I did know about this because I'm all new to Android, and this is my first tablet. I could follow the tutorials to set up the account 4G T-Mobile after that.

• I have a microsoft wireless keyboard4000 when I try to use the question mark I get / can you tell me what the problem with it I was getting with a line above.

  I have a microsoft wireless 4000 keyboard when I try to use the question mark I get / can you tell me how to fix

  or what is the problem, I received an e with a line above.

  Hello
  
  1. what was your keyboard last working fine?
  2. you remember to make changes on your computer recently?
  Try the steps and mark for the question below.
  a. click the Start button, type region and language and press ENTER.
  b. click the keyboards and languages tab.
  c. click Change keyboards.
  d. in the pop-up window, click Legeneralonglet.
  e. under default input language, select English (United States) - US or any another language you use generally.
  f. click on the OK button.
  g. click OK button region and language.
  I hope this helps.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Can someone tell me where the links to 'Manage your sites' moved to the menu where I discovered my creative cloud files?

  Someone at - it a link? I used to go online to manage my sites and make appropriate changes directly in the browser with the service. Where did you go!!! Oh no.!

  Wow, I'm really sorry to post this, HAHA, or even ask. After about 25 seconds, I realize you would simply enter in the browser of your web site address followed by/Admin example www.mysite.com/admin Silly me... I love Adobe :-)

• Can someone tell me please the steps the program USB-6211 with C. will I receive the software to program the unit as well as the drivers CD that I got when I bought the unit?

  Is - this required that I need to buy the Labwindows or there's someother way of programming using C?

  Thank you

  Diya

  
  

• Can someone tell me what the steps are to ensure that my system works best?

  I feel the wheel that rotates a lot.

  I have a powerful system, so I thought that he must perform well.  I am running Yosemite 10.10.5, 3.4 Ghz, 32 GB of memory.

  I know that my internet is often slow and explains that some of my problems.  However, some applications seem to take a lot of time too, when they use INTERNET.  One such application is a database called genomematepro.  It seems to take up to one minute to change screens.  I questioned my problem in the Group of users of GMP, most seem to slow performance report during the import, but not not using real data.  My import seems fast enough compared to others, but when actually using the program is quite slow.

  I tried repair disk permissions, clear cache via screen Safari 'developing' and 'MemoryFreer' app.  Is there anything else I can do?

  I encounter this problem with iTunes and Photos too, but not as consistent as GMP.

  When I went to the apple store someone suggested re my charging base operating system software.  I don't know what this means?  Upgrade to El Capitan would do that?

  A Possible Cause for a slow computer

  (Thanks to for this contribution EtreSoft .)

  If you have a problem with a slow machine and use Google Docs, then check if the Google Docs page shows the top sites in your browser. Once he enters the Top Sites, you get a Safari Web Content process that slows down the whole machine, but you do not even get a window for it. This is the key point. The problem will be definitively resolved until you remove the Google Docs of Top Sites page.

  [This was changed for clarity and syntax of khati.]

  
  

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

  Safari runs slowly and Fans running

  Open Safari preferences. Click on the Privacy icon in the toolbar. Click on the button delete all data from the Web site .

  Open system preferences. Select Flash Player; Click on the Advanced tab click the clear all button. Check the box labeled "delete all data and Site Settings", then click on the delete data button.

  dominic23

  1 June 2015 16:38

  Re: why the computer takes so long to load in safari

  Go step by step by step and test.

  1. power off the router.

  Unplug it from the wall. Wait a while. Plug it in, back to the wall. Turn on the router.

  Wait for all lights are light up properly. It will take a while. Restart the computer.

  Start in Safe Mode.

  2 remove Caches.db.

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to the trash.

  Shut down windows and restart Safari.

  3 empty Caches.

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies.

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 safari > Preferences > Extensions

  Disable any Extensions and launch Safari again to test.

  Turn on some and test.

  6 deselect if selected proxies.

  System Preferences > network > advanced > proxies tab

  Under 'Select the Protocol', uncheck any box if selected.

  Click 'OK' and then 'apply '.

  7. If it does not help.

  Launch EtreCheck and post the report here please.

• Can someone tell me what's wrong with my loop of consumer queue or producer?

  A Labview engineer helped me with the overall structure of my program, made necessary by the rapid sampling rate data and post-processing requirements. He recommended the producer/consumer, loop and using one of the example (Cont CQI graph - int clk voltage) files to actual data acquisition. So I put the loop on foot and spend my two channels of data acq past in the loop of the producer. However, nothing is get picked up in the loop of consumer and none of my data gets displayed there.

  Someone wants to take a look and let me know what I am doing wrong?

  It seems that the only time where you have to write the data in the queue (in the loop of the producer), when you stop the DAQ while loop or the acquisition of data generates an error.

  You may need to place the element from the queue node in the data acquisition while loop.

• can someone tell me why the sound becomes distorted on my external speakers when I plug the charger on my netbook?

  I have a set of logitech speakers and a subwoofer that I use on my netbook, but when I plug the charger to recharge the battery, the sound distorts seriously which means I can listen only as long as the battery, I sent l; ogitech but they said it was a problem on my computer. Anyone have any ideas why?

  Hi gaz2558,

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  http://support.Microsoft.com/kb/813498

  Also update the latest audio drivers.

  http://support.Microsoft.com/kb/166774

  Reference: http://support.microsoft.com/kb/307918/en-gb

• I got an avast! cautionary statement regarding a windows tmp file. Can someone tell me what the file is for?

  • The program is: C:\WINDOWS\Installer\MS1306.tmp
  • System resources: Services and drivers
  • Target object: \REGISTRY\MACHINE\System\... Beginning
  • Request forwarded: C:\WINDOWS\system32\services.exe

  I NEVER use IE, but had to install IE8 (he hates as much as all other versions, sorry!) for a work related issue (on my PC at home) and I have a feeling is something pertaining to this, but of course cannot find anything safe.

  Thank you!

  By convention/common agreement, files with extension tmp are temporaty. That is to say, they are created by an application for its own use and are intended to be removed when this use is over. These files are usually deleted by the application until the application ends.

  In all cases, it should cause no problems to delete all these files.

  Tom Ferguson

  PS OT

  I was not very fond of IE 8. I like much better IE 9. The most recent Firefox is OK, I think.