INSTALLATION OF PRINTER OFFICEJET 7310

Similar Questions

• OfficeJet 7310: Reported Device Manager driver missing for printer Officejet 7310

  I used the full setting install software downloaded from the HP site to set up a printer Officejet 7310 on a Lenovo laptop, T540p with OS 64 - bit Windows 8.1.  Installation and printer seem to work fine since I can print and I can also scan from the HP Solution Center utility.  However, Device Manager reports two errors/anomalies as follows.

  Under the heading 'Multifunction cards' the Officejet 7300 series properties shows the status of the device such as:
  This device is disabled. (Code 22)
  Click Enable device to enable this device.

  To the title of the theOfficejet 7300 series entry 'Other devices' properties shows the status of the device as:
  The drivers for this device are not installed. (Code 28)
  There is no compatible driver for this device.
  To find a driver for this device, click Update driver.

  I find this a little confusing, because I believe that the installation of the software is supposed to include the pilot, as well as the printer seems to function (which could be due to default Microsoft drivers).

  Any thoughts on how things are in this State and how to recover would be deeply appreciated as I prefer not to "ignore" error messages.

  Thank you

  Glenn

  Well, I finally got a moment for all dismantle and reinstall according to the suggested procedure.  The offending Device Manager entry disappears not directly as a result of using the tools Microsoft and CCleaner, but after these steps in the process, I was able to remove the entry from the device.  I suspect that the registry was somehow blocked upward and demelee enough tools stuff for me to delete the entry.

  The relocation went well, but unfortunately, I misread the part about the reference of USB and initially installed with a USB connection.  I had to go back and add the network connection, which was not a problem.  I wonder if I can remove the USB from the printer through devices and printers instance while keeping the Solutions Center HP happy on the network printer instance.

  Thanks again for the detailed procedure.

  Kind regards
  Glenn

• Installation for printer Officejet 4622 software

  Ineed to reinstall my software for my printer officejet 4622 but have lost the disc. Is it possible to download the software? Thanks LindaJT

  All you have to do is to search the web and you will find...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=5218810

  Choose your operating system.

• Problems connecting an Officejet 7310, wireless and ethernet cable

  My printer (Officejet 7310) is connected to two PCs with an ethernet cable and the router. Now I want to install a laptop as well.

  I know that the lap top is communicating with the wireless router, but I can't get the laptop to recognize that there is a printer is installed.

  I tried to connect the printer directly (via Ethernet cable) to the laptop and it works fine. I downloaded the latest version of the software for the 7310 and used two options (without wire and cable).

  Any help would be most appreciated.

  Cutting the anti-virus made no difference.

  I HEALED NOW THE PROBLEM!

  Installed a new router 2wire.

  Thanks a lot for your help.

• HP OFFICEJET 7310: LOST INSTALL CD FOR OFFICEJET 7310 ALL-IN-ONE PRINTER - ANYONE KNOW HOW TO FIND THE DRIVER FOR IT?

  ANYONE ABLE TO WALK THROUGH WHERE TO FIND THE DRIVER FOR PRINTER HP OFFICEJET 7310?  I LOST INSTALLATION CD YEARS.

  Hello:

  You can download the driver from the link below...

  This download includes the HP Photosmart and Officejet Software Suite (advanced imagery and product functionality) and driver.

  File name: AIO_CDB_Net_Full_Win_WW_140_408 - 5.exe

• OfficeJet Pro 8610: complete installation of printer - computer laptop doesn't have a CD rom

  In order to complete the installation process, the instructions say to insert the CD supplied with the printer. My laptop does not a CD rom so I cannot insert the CD-ROM. How can I complete the installation?

  Thank you

  Hello

  If your operating system is available, you can download driver for installation:

  Printer software e-all-in-one-HP Officejet Pro 8610 & drivers | HP® Support
  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer-series/5367603/model/5367606/drivers

• HP Officejet 7310 AOL: Portable printer model HP Officejet 7310 won't come.

  Printer off; Impossible to get it back on by pressing the key. I checked all the electrical connections are OK. This problem started right after I replaced the Tricolor HP Ink Cartridge 95. THE indicator light will not illuminate. Is there a hidden fuse or lock activated I'm missing?  Any advice would be helpful. Thank you, Ken Yarber

  Thank you for the HP Forums @Kenyarber,

  I understand your Officejet 7310 is no longer turns on and the led "On" lights up or the other.

  We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in. Also, even if you have used a surge protector/power bar this whole time and you feel this isn't the cause, please plug it in to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  * In this document, you will see, QUESTION: questions or problems may occur when a printer HP LaserJet series printer is connected to a UPS (UPS), a power strip or a surge protector that is not limited to the Laserjet printers.

  I can't wait to hear back on your part. If performing a hard reset, or move the printer to a socket solves the problem, please click Accept as Solution button below so that the community can see your problem is solved. If the problem persists, what you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  Thank you, good luck.

• HP Officejet 7310: Installation with Windows 10 HP7310

  I just installed my HP7310 on a new computer running Windows 10, using the in all download a driver.  He is shown as a single device-' hp73300 series fax '-rather than two "-hp7300 of the series and 'fax of the hp7300 series' as previously.  I can't put it to print by default, he always wants to fax while I can print if I'm going the long way by selecting the printer each time.  How do I:

  (a) set the default printing function, or

  (b) uninstall the fax service as I do not use it

  Hi @Chris-bovey

  Thanks for the comments.

  Have you tried Control Panel > hardware and audio > devices and printers > right click on your printer and select "Set as default" and choose the NON-TELECOPIEUR HP Officejet 7310?  (this option was available?)

  Here is a sample photo:

  

  Spoiler (Highlight to read)

  Is there another driver, or a way to customize the pilot give features of the printer/copier/scanner, but exclude the fax feature?

• I try to connect my Acer Vista laptop for HP Officejet 7310 printer using a wireless connection.

  I try to connect my Acer Vista laptop for HP Officejet 7310 printer using a wireless connection.  The printer is connected to a Dell XPS running Windows 7.  Is there a way to do this?

  Hello

  Printers use a built-in wireless card and plug it into a power source, not your network or computer. After turning on the printer, you must refer to the documentation that came with the printer to set up a wireless connection for each computer.

  I suggest you to download and install drivers from the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=391182

  Please use the links below.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• HP OfficeJet 7310 all-in-One slow takes 15 minutes to print the page

  Why my HP OfficeJet 7310 all-in-One printer suddenly run so slow it takes 15 minutes or more to print a page? I use MacBook with OS 10.7 Lion and reinstalled the latest drivers that have been for OS Snow Leopard. How to speed this up?

  Hello

  If the same behavior appears in copying autonomous

  Even though the USB cable is disconnected, so the computer is without impact on the device and not related to the problem

  By the information provided, the problem is with your printer hardware

  However, make sure that your cartridges are without impact on your printer

  Make sure the expirations of ink did not both for black and color, as well, try to isolate the problem and check if cartridges it may as follows

  Remove the color cartridge and try to print from the computer

  Now repeat the same thing with black ink only

  If the problem occurs with a specific cartridge only, replace the cartridge.

  If the same behavior is displayed for either of these tests, I suggest you try a different power outlet. If there is no change yet, contact the HP call center in your area, in an attempt to reset your device.

  It is our last chance, otherwise it will repair the product

• OfficeJet 7310 all-in-one auto 2-sided printing problem

  Printer all-in-one Officejet 7310 with auto 2-sided does not even appear as a printing options in Windows 7. Is there a driver that will solve this problem?

  Babe7 salvation,

  Can you make a standalone copy from the glass?

  Can you make a standalone copy of the ADF?

  Follow the steps outlined in the document below.

  The ADF (ADF) captures no paper

• -What is the HP Officejet 7310 all in one able to print wireless

  -What is the HP Officejet 7310 all in one able to print wireless

  What operating system?  If Windows and with the printer connected to the router via Ethernet, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• HP support cannot get officejet 7310 all-in-one to print even though looks and sounds like it is.

  Printer, HP officejet 7310 all-in-one had not been used in 3 weeks.  Cartridge black ink but nevermind. New in color cartridge.  Print test works very well.   Do you have the drilling cleaning cartridge.  Downloaded diagnostic printing and scanning tool.  He ran.    Yes, it prints, but only a couple of lines are visible, but barely, ghostly, and then nada.  The color cartridge is not used.  This on a PC with windows XP.  So far, the printer worked great.  The same results if using Notepad or an Internet site.  Suggestions anyone?

  The obvious suggestion is to replace the black cartridge.  If you need print now, you can use reserve mode or select photo paper (which will use only the color cartridge).

  The printer will automatically not using the color cartridge when the black cartridge is out of ink.  If you want to use the color cartridge to print in black, you can remove the black cartridge.  The printer will then give an error on the screen but is printed in reserve mode using only the color cartridge.  Copies cannot be predicted with the printer by way of reservation, you will need to replace the black cartridge.

• OfficeJet 7310 all-in-One: the device is not complete - Officejet 7310

  Initially, a 10 on my network windows desktop could no longer communicate with my Officejet 7310 all-in-one ethernet connection.  The Office recognizes the 7310 as a printer, but not as an all-in-one.  I tried to reinstall the software using the prescribed protocols, without success. I decided to ignore the problem.  The Office could still use the 7310 as a printer, but not as an all-in-one. In addition, my two laptops could always use the all-in-one features.

  Today, no reason apparent, the all-in-one feature has stopped working on my windows of 10 laptops.  When I tried to scan a document, I received a message that says: "device to complete installation. Attach the usb cable or reinstall the software. "I am more able to reinstall the all-in-one software.  Just like with my office, my laptop can use the all-in-one printing function, but cannot use the functions of HP Solutions Center.

  I used the protocols recommended - uninstall the 7310, running windows disk cleanup, run ccleaner registery cleaner, closing all devices on the network except the 7310 and a laptop.  Nothing works, despite several attempts on various computers.  Is no longer, I can install the software of HP Solutions Center on any of my windows 10, 64-bit, PCs - wired or wireless.  The 7310 is essentially a 'brick', because it no longer works as an all-in-one.

  What can I do to fix this? Help.

  Hey @fatz2fly,

  I don't think that you have missed something, but I recommend you uninstall a more holistic approach at this stage. I know that this appears at first sight very complicated, but I burst in instructions step by step to make it easy to follow

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
     • Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  2. Delete the printer devices and printers and the driver from the properties of the server. See the instructions below before proceeding to step 3.
  3. Download the software and choose Save as, save to desktop >AIO_CDB_Net_Full_Win_WW_130_141.exe
     • After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
     • Locate and open the folder starting with 7z (example: 7zS2356)
     • Open the Util folder
     • The CCC folder
     • If you have a computer HP run the L3uninstall.exe. If you have acomputer no HP run the L4uninstall.exe
  4. Once the uninstall is complete, reboot the computer
  5. Download and run CCleaner - How to use CCleaner.

     Installing software on the computer with a registry key, its place would be like trying to paint a wall with a hole in it, you need to patch the hole first. Repair the registry, and then install the software. Registry cleaners can be useful tools to solve certain types of problems in the registry, as those that are created when a program does not properly uninstall or a malware infection is not cleaned properly.

     This suggestion is not a document of HP, it is my own opinion. My preference is CCleaner, I use it on my computers. If you have a registry cleaner already, or that you prefer, you can use it.

• Follow these steps to reset the registry settings and options for Windows Installer.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec /Unregister, and then click OK.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec/regserver, and then click OK

* Note: there is a space between the c and the /.

If you do not at this stage, use this link to perform another way. Restart Windows install

1. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup
2. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
3. Restart the computer
4. Download and run the HP printer install wizard for Windows
5. The HP printer for window installation wizard was created to help Windows 7, 8, 8.1 and 10 users download and install the most recent and most appropriate HP software solution for their HP printer.

Please let me know if that solves the problem, or if you need assistance. Thank you!

_______________________________________________________________________________________

REMOVE THE DRIVER FROM THE PRINT SERVER PROPERTIES

1. in the folder "devices and printers".

2. choose "print server properties.

• Win XP - with no printer selected, click 'File' then 'server properties '.
• Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
• Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

3. click on the "Drivers" tab at the top of the window "properties of the print server.

4. choose the printer that you want to uninstall, and then click 'remove '.

5. choose "Remove driver only.

6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

• If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

Now return to step 3 of the instructions above.