XP hangs sometime after the beginning

Similar Questions

• Front Panel hangs after the beginning of the routine

  Hello

  I am writing an application that looks a bit like that fixed. The idea is to have a Setup mode after the beginning of the program, where you can enter all the data to specify a test routine. In the first loop representing the configuration mode, I have an event structure that is pretty huge, in fact, because it represents a contextual help for my program, I added. After clicking on the Start button (which is possible only when some tabs from the tab control are selected), I turn off and the Start button gray. After that puts it on, there are several automatic modes and a manual control which are selected depending on the active tab.

  In this mode, the front suddenly freezes i.e. no control will react to my entry.

  I programmed this sample program to get because of the problem. It seems that there is a problem when using local variables and the switch until released action. The problem was solved when I selected the switch when you press mode.

  I applied the same changes in VI I develop, but the problem still remains.

  Someone at - he had an idea, why?

  
  

• Mail crashes 2 seconds after the beginning

  Mail crashes 2 seconds after the beginning

  -Mac Book Pro retina

  -Captain El OS - X, last updated 7 June

  -Apple Mail, Update June 7

  The problem cannot be resolved. Restart of OX - X does not help.

  Try this:

  Exit the Mail.

  In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:

  ~/Library/containers/com. Apple.mail

  Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.

• Sometimes, after the connection in page my keybord just stuck and I need to restart firefox. Can I fix it some how?

  Sometimes after connecting to my keyboard does not work in the system (firefox, notepad, word, etc.) and I have to restart firefox.

  There is an extension installed in the profile you submitted this application called: Chrome virtual keyboard

  This keyboard become the keyboard by default when you start Firefox? Try disabling each extension one by one to determine the culprit.

• Module NI 9403 terminal State after the beginning of task

  Hi all

  We have some problems with a relay connected to the NI 9403 module card. There are probably a few Chin-ups correct definition outputs during the initialization of the 9403 (high logic out the relay).

  After feeding the 9403, no relay are activated, which is good. If the default value of the input terminal has no consequences.

  However, directly after the Start the task defining the outputs as 9403 (without writing again to real data), all relays are activated. This behavior is independent of the 'InvertLines' property and thus independent of the default logic level.

  My question: what happens with the terminal type (and the input impedance) during the market and directly after starting the task to DO? Does it change to a situation of three States? And he leaves the tri - state after writing the first data word?

  Can we resolve this problem by adding 4 k 7 pullup to the terminals?

  Thanks for the help!

  Martin

  Hello Martin,

  The best way to solve this problem is to use a pull-up resistance. Then, you can start the task unit and lines appear at the bottom. The lines have a nominal input of 50kOhm impedance. And not the 9403 does not work in a sort state.

  I hope that the resistance will solve your problem! I will close this topic at the moment, but if you find any problems or have any other questions, please keep posting on this subject.

  Best regards

  Jarmo Levo

  Technical sales engineer

  National Instruments

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Do not get data in the target after the beginning of the session.

  Hello

  I applied the filter. source and target table are Oracle database tables. Source have data. Target of no data. I chose insert, update, commit as true in the properties of the target. Eventhough

  After the execution, I do not receive data in the tables of the target. Please check below the images.

  Thanks in advance,

  A.Kavya.

  

  

  

  Hello

  Screen capture, I see you used LKM as well. Then, probably, you can start by consulting the table loading step $ CAN to see how many rows were loaded into C$ source table.

  If you have data in C$ then next step would be to check the data loaded in I$ table. I can see screenshots that you set the false Frother so that your data can not go to E$. PS please check where your data falls to C$ I $ loading.

  You can restart the interface and you can set the property 'drop of temporary objects' false so that C$ I $ table not deleted and are there for analysis.

  It will be useful.

  Thank you

  Ajay

• Computer hangs or freezes a few minutes after the beginning

  Hi all

  I hope someone has the knowledge to help me.

  I have a Dell Vostro 1500, Vista Business x 32 installed.

  In the last days:

  * On a normal startup, the computer hangs after a few minutes.
  I get either 'failure-security options' pop up or the computer crashes only the operation of the pointer.
  The blue off the Task Manager CPU usage hard drive light will goes from 0 to 1% and stays there.

  I was able to copy information from a pop up that says I was saved from a fall BSOD:
  Signature of the problem:
  Problem event name: bluescreen
  OS version: 6.06002.2.2.0.256.6
  Locale ID: 1033

  More information about the problem:
  BCCODE: f4
  BCP1: 00000003
  BCP2: 8F639608
  BCP3: 8F639754
  BCP4: 82A5FC30
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  * No problem starting and running programs and internet with ' SafeMode w / networking. "

  * The only thing I added was a Microsoft Update in the last days.
  I tried to do a system restore, but there is no system restore point.
  I used the restore of the system about 3 weeks there due to the other Microsoft Update was also causing startup problems.
  I didn't knowingly clear Points of system restore or turn off System Restore.

  * I ran Malwarebytes Anti-Malware and I got quarantined {PUP. Optional.Sanbreel.A, PUP. Optional.Sanbreel.A, PUP. Optional.Instacore.A, PUP. Optional.Hold.A}

  * I ran AVAST antivirus recently with no viruses listed, but not in the last days.

  * Chkdsk fixed drive C by removing some entries and fixed a couple of bad sectors.

  * sfc/scannow to block exactly 82% and I had to make a compromise difficult stop.

  If someone is knowledgeable on how to correct the situation described above, please answer!

  Perhaps it would be better for me to all my files on a memory stick or external hard drive simply copy and then reload Vista? Is there a disadvantage in doing this?

  This way you do not uncover what caused the problem and you might find that you still have a problem.

  so I can only perform simple tests troubleshooting with confidence.

  It's exactly what I mean do you. You follow the instructions, the information and I tell you what to do next. Ads simple as one of the meercats said in the TV. You get a bonus in this way you improve your knowledge of the works of your computer.

  We may be able to solve your problem yet more easily.

  Please download and run ADWCleaner and download a copy of the report produced for your OneDrive. Delete everything it finds. :
  http://www.bleepingcomputer.com/download/adwcleaner/

  I suggest you take the precaution to create a system restore point before running ADWCleaner, guard against unintended consequences. Select Start, Control Panel, system, System Protection, and then click the create button.

• InDesing cs5.5 hangs shortly after the opening, since the update to Mac osx Mountain Lion

  InDesing cs5.5 is suspended shortly after opening, since the update to Mac osx Mountain Lion.

  I have creative suite 5.5 and all the other apps work except indesign.

  I can provide the error report if this can help.

  any help would be much appreciated.

  Thank you

  See here

  http://helpx.Adobe.com/InDesign/KB/hang-freeze-open-create-file.html

• Satellite P100 freezes a few minutes after the beginning

  Hi all!

  Im having a little problem with my satellite. When I start my computer its TI all ok, but after 5-6 minutes, always do the same thing. The screen freezes and it is impossible to do antyhing. My computer is only 2 years old. My guess is that the cpu is overheating, but I'm not sure. Maybe problems with the fans or just for more dust.

  -Does anyone know if it could be another hardware problem that makes the computer freezes? Also when I try to just start all over again it freezes in 1-2 mnutes.

  Hello

  It could be overheating but maybe memory dysfunctions?
  After 2 years of work from the laptop cooling modules might not turn with maximum performance and so the CPU cannot be cooled correctly
  so you could check if the fan cleaning grids will help a little to avoid freezing.

  Additional test memory. There are several tools to test memory like MemTest or Memtest 86. These tools are free!

• Windows Vista does not start after the beginning upward

  My computer won't start Windows Vista after startup, I tried startup repair and it gave me a screen type scrambled at the end.  When I let him start normally I get a black screen and when I do the Startup Repair I get every time the same garbled screen. I tried to reinstall Windows Vista, but when I put the disc in my pc it did nothing. How can I reinstall the operating system?

  Hello

  Startup Repair might not have worked however the SFC, CheckDisk system restore and then even a new attempt of
  Startup Repair might work.

  Try the repair to start the Recovery Console (if you have a) or from a disk of Vista - if you have not a
  Disk of Vista, you can borrow a friends (they are not protected against copying) or make a. The manufacturer of your system will also
  sell cheap physical disks since you already own Windows.

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try Options recovery or a disk of Vista startup repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Vista disk

  SFC/scannow
  Press enter

  and after that runs away

  Chkdsk /f /r
  Press enter

  (Spaces between C and / k and / and f and /)

  Retry After Chkdsk startup repair.

  If after those try you system restore from the recovery or Vista disc.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Retry if necessary startup repair.

  =================================================

  To re - install:

  Check with your system manufacturer that they all slightly different methods. They may have included a recovery
  Partition or other methods to restore the default value. Also your system manufacturer will sell you the physical disks at a great price
  Since you already own windows.

  What are the system recovery options in Windows Vista?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx

  This tells you how to access the System Recovery Options and/or Vista discs
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  ----------------------------------------------------------------------------------------

  Check with your system manufacturer support as they may have understood, Partitions recovery Vista DVD, and/or
  other methods to return to the original configuration.

  Here it is just a few options and you should contact our service system Maker to be sure
  you know all the options you have.

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Qosmio F20-155: error after the beginning of the control panel controls

  I installed Win 2000 on a Qosmio F20-155 computer and I get an error like this when I start the TOSHIBA controls control panel. Could someone help me please?

  "An error occurred while windows was working with the Control Panel file C:\Program Toshiba Toshiba Controls\ToshSrv.cpl.

  Hello

  I checked the page of the Toshiba driver and there is no drivers Toshiba for W2k on the Qosmio F20. Where did you get the drivers of control?
  You need a driver for Toshiba in particular to use the commands. But there is no driver for W2k. In this case, the controls cannot function properly.

• Send directions (all) the printer to print a page, then print some sort of page of job description - all pages (sometimes after the document of several pages)!

  How can I stop this?

  The most important things about the 'description' are Document 1 / model: C:\Users\hp-intel\AppData\Roaming\Microsoft\Normal.dot

  It uses my book and drives me crazy. Can someone tell me - a computer - what to do dumbo?

  Thank you.

  Hello Gordon,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble printing to the printer in Windows. We are happy to help you to fix the problem.

  But before proceeding to further troubleshooting, I would like to know some information to help you better.

  (1) you remember recent changes before this problem?

  (2) the printer didn't earlier work with this computer?

  (3) the specific question is all in, print a particular document?

  (4) you are able to print from any other printer?

  (5) what is the brand and model of the printer and the computer?

  In the meantime, please follow the following suggestions to solve the problem.

  Everything first, try to follow the link below and run the troubleshooter, see if that helps.

  Open the printer tro ubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If this does not help, try to follow the steps mentioned in the link below to solve some common problems in the printer.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• The opacity setting moves its value after the beginning of a new path.

  When I pre-select an opacity value, before drawing a new path with the pen tool, a fill color and outline color... I never have the effects of opacity to stay, as I put it. It comes down to the value of 100% as soon as I put my initial point of departure for the new path.

  I want very much to the opacity of stay to the value I set, since based on the transparency of the fill to see what I'm following up to the wire. Forget I have something big that could be causing this, or there may be a way to do better what I'm doing?

  Thanks for any help,

  Jim

  Try to uncheck it in the appearance Panel.

  

• Have Photoshop 7.0.1 - recently left economy as or save pictures after the changes. Just hangs until I have kill the process with the Task Manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC I hate subscription servic

  Just hangs until I have kill the process with the Task Manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC because I hate subscription services and I often internet connection services interuppted.

  What operating system do you use?

  Reset the photoshop preferences could cure the problem.

  Press and hold down the Shift + Ctrl + Alt keys right after the beginning of the launch of photoshop 7

  (Shift-command-Option on mac)

  Keep possession of the keys down until you get a dialog box asking if you want to delete the adobe photoshop settings file

  Press Yes