Can standby database configured on VMWare Server or not?
Hi allIs it possible that our main server is not on the vmware server, but standby server can be configured on the server of VMWare?
As far as I know, configuration of both server should be same.
If our main server is not on the Vmware server but waiting for database configured on Vmware server, going to work or not.
Pls suggest me...
And another thing is that is it necessary to have a dedicated connection b/w primary and standby server for RFS process.
pls suggest me...
Hi again!
That's right for your main server, but if you need to pass / failover to the standby DB on VM-Ware could you have performance problems.
concerning
Florian W.
Tags: Database
Similar Questions
-
How Auto start the Physical Standby Database (when restarting the server)
Dear All (s)
I configure oracle (10.2.0) dataguard on the production database, a time server restart because of disconnectivity to power, I want restard dataguard when rebooting the server. I'm using Server 2003 32-bit. Guide me how I can run after orders when the server restarts.
SQL > connect/as sysdba
SQL > bootable media.
SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
Thanks in advanceI want to run these command each time when the server is restarted.
Yes, I did not understand that... but what's the problem? You can't schedule a task when the server starts?
-
How to refine the configuration of Vmware server on windows host
Hello
can someone explain how to refine the Vmware host windows server edition?
Hello
First, you decide what you want to use the VMWARE server.
If you want to use vmware server for only to keep the plane comments at end of test system administartion, during the installation of VMware server you will need to customize your installation.
In the Customize installation disable the Modules Perl script which are used for development purposes, after installing the server, go to services & disable services unwanted, assume that you use no DHCP & NAT, then disable these services. In doing so, it will save the memory & performance increase of you host mechine.
When you create your mechine comments try to reduce unwanted devices, how to remove the floppy drive if you don't want to use in the mechine comments. like this, try to reduce the additional devices you use rarely, if you're runnin server edition comments mechines, then try to reduce you is display resolution, which will give a good performance.
Kind regards
Jak
-
How can ping virtual machine on VMware Server external network?
In the Vmware infrastructure products you can can be crazy from the outside through their individual networks connections, which is a good thing... lol
How this is possible on VMware Server when guests use the VMnet8 network that uses NAT?
In many scenarios, the use of bypass is prohibited due to the policy defined at the level of the external switch, but it is still necessary for the basic functionality of ping. Otherwise, how they would be able to know if a virtual machine is actually up to who answered the questionnaire on the network without entering actual connections to such hosts?
You're right - that's how NAT works (whether via a service such as the VMware NAT service software or a hardware router/firewall NAT). All computers behind the NAT server are hidden from the outside world (unless you map specific ports to the specific IP address of a computer)... they are so NOT to pings from the outside.
-
VMware server does not recognize my cpu
Hello.
I installed debian squeeze on an IBM x 3650 M2 wth a quad core xeon E5504
I use 2.6.32 - 3-vserver-686-bigmem in kernel and if I cat/proc/cpuinfo I can see all 4 core.
VMware server is correctly installed and now 2 virtual machine is running, but I see in the web gui:
Processors Intel Xeon E5504 processor @ 2.00GHz 1 CPU x 2 hearts
any suggestions?
Hello
Yes, your server and the cpu are supported for ESX (i) 3.5 U4 and superior.
In the VMWare compatibility guide, nothing is said about compatibility with vmware server 2.
If you check the compatible processors in the guide to vmware server 2 , you'll see vmware server just supports until the Intel Xeon Quad Core 5300 series, not the new series 5400 or 5400. That's why vmware server 2 recognizes your Quad Core E5504 as Dual Core. Because it does not support your CPU.
IMHO, if I were you, I'll try to use your server esxi 4.0 U1. It is a best product of vmware server virtualization and supports your CPU.
Best wishes / Saludos.
Pablo
Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!
-
How to restore a database to a different server, do not use the catalogue
Hello
I have to restore a database to a different server, but without using the catalogue, i.e. I can use the control as a repository file.
I have measures to restore on the same server. Are the steps even if I want to restore the backup to a different server.
Please guide me.
Waiting for the answer.
Thank you and best regards,
DeepakPlease see this thread for creating a database from backups of the production test
-
Can save the configuration when running VI, but not file not when running EXE
Hello
I have attached a file zip containing a LabVIEW project as well as a built EXE.
The program will load up the numerical value of the file config in both cases, but it will only write the configuration file when it is executed as a VI, not as an executable file. If I don't use the computer of JKI State, I do not think I see this problem, so I think it's the order in which the program quits? I tried to disable the Panel before closing, but that did not always help.
Reading configuration file is made in the case of "Data - initialize" and the config file for writing in the case of 'Cleaning up' -.
It seems that the difference between the run-time and development environment behavior is the Close event of front panel. It's in Dev mode, you do not go to the front > close State, but you don't have at run time. Try to run your cleanup command before the command close to see if that fixes it. If you close the front panel, the values could be recovered, VI OpenG has not all the values to get more because they have left the memory.
If the Panel should be closed more quickly, but you need to hide the front panel without the closing, you can use the FP. Open invoke node with a contribution of the State of "hidden". This will hide the front panel while keeping open and then the Panel will always close end when your application terminates.
-
In my configuration of VMware Server 2, I would like to create a role that helps users where all they can do is create, start, and stop the virtual machine. Nothing more. Can what privileges I give to make sure that they can do it without problems?
Thank you
Try the following - works for me:
Data store-> Browse Datastore + file management
Virtual machine-> inventory-> create
Virtual machine-> Interaction-> all the
Virtual machine-> Configuration-> add existing disk + add new disk + add or remove devices
Resources-> Machine virtual Assign to the Resource PoolIf you get errors, take at look at the hostd.log file as it should show you the details of the exception which is quite easy to find what a privilege you need to grant.
Guy Leech
VMware vExpert 2009
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
VMware Server 2 installation HGFS actions
I get "editing HGFS actions: FAILED ' when that I start my comment nodes. I use Server 2 (final) CentOS4.7 as the host and the guest operating system. After a search through the forums, I was under the impression that the HGFS bug is fixed in VMware server 2. Don't know where to start my troubleshooting... any help would be greatly appreciated.
How is this failure HGFS impact me?
My VMware Server has several data stores, I used these data storage when adding virtual disks (SCSI hard drives) to my virtual nodes. Now my/dev/sd * looks like this:
CD/dev
LS sd *.
Sda1 sda2 sda3 sdb sdc sdd sde sdf SDA
After partitioning sdb thru homeless using fdisk:
CD/dev
LS sd *.
SDA sda1 sda2 sda3 sdb SDC sdd sde sdf sdf1 sde1 sdd1 sdc1 sdb1
I created gross peripheral futher using sdb1 thru sdf1. Here are a few more out of my guest node:
#cd/dev
ls - l. / sd *.
BRW - rw - 1 root disk 8, 0 Apr 27 06:03. / sda
BRW - rw - 1 root disk 8, 1 Apr 27 06:03. / sda1
BRW - rw - 1 root disk 8, 2 Apr 27 06:03. / sda2
BRW - rw - 1 root disk 8, 3 Apr 27 06:03. / sda3
BRW - rw - 1 root disk 8, 16 Apr 27 06:03. / sdb
BRW - rw - 1 root disk 8, 17 Apr 27 06:03. / sdb1
BRW - rw - 1 root disk 8, 32 27 April 06:03. / SDC
BRW - rw - 1 root disk 8, 33 27 April 06:03. / sdc1
BRW - rw - 1 root disk 8, 48 Apr 27 06:03. / SDS
BRW - rw - 1 root disk 8, 49-27 April 06:03. / sdd1
BRW - rw - 1 root disk 8, 64 Apr 27 06:03. / sde
BRW - rw - 1 root disk 8, 65 27 April 06:03. / sde1
BRW - rw - 1 root disk 8, 80 Apr 27 06:03. / homeless
BRW - rw - 1 root disk 8, 81 27 April 06:03. / sdf1
DF
1 K-blocks used available use % mounted on file system
/ dev/sda3 22730808 4096392 17479748 19%.
/ dev/sda1 1004024 24256 928764 3% / Boot
No 517248 0 517248 0% / dev/shm
That looks like me all SCSI drives, I added mounted very well... Where the HGFS share arrived in picture at all?
Thank you
HGFS is the Guest Host File System.
It is more commonly used in my computer when you use the "Shared folders" feature, by presenting a host record to the guest under the/mnt/hgfs folder OS.
Kinda like a mapped drive, but between vm and host. However, the server doesn't support HGFS can be a module for it.
http://www.VMware.com/PDF/vmserver2.PDF
-Page 75:
A kernel module for the management of folders, called hgfs.sys Windows and vmhgfs under Linux and Solaris. VMware Server does not support shared folders. The module is included for compatibility of products.
Kind regards
EvilOne
VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
VMWare Server 2 does not automatically start on the Linux host
Hello
My problem:
When I start my computer (Linux Suse 11 (64-bit), then VMWare Server is not running. So I have to open a terminal, get root, and then /etc/init.d/vmware start.
I would like to have this done automatically.
I have an entry in /etc/init.d/rc5.d/ called S19vmware, but it seems that it doesn't matter, and I can't find an entry in dmesg or var.
I have a few entries in /etc/init.d/: vmware, vmware autostart, hearts vmware, vmware-mgmt, the link in /etc/init.d/rc5.d/S19vmware tip vmware_start to... /VMware is that correct?
Any help appreciated.
Thank you
Dirk TheSheep
I had the same problem on my openSUSE 10.3 x 64 host and found that setting RUN_PARALLEL "no" in/etc/sysconfig/boot ensured that vmware services launched at startup.
-
Cannot access C: / drive with Oracle 11 G Database configuration Assistant
Original title: m unable to access anything of my c drive.
I configured my 11g using oracle it Database configuration Assistant O.S. is not allow me to access c still my system drive, it does not get as administration for all the system option. Please help me
Hi abh.
I suggest to see if the problem resolves running Startup Repair:
http://support.Microsoft.com/kb/934540
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Software and Vmware Server 2.0.2
HelloIn our project, we still have a legacy VMware Server 2.0.2 and I would like to know how it is affected (if any) by software. Y at - there a patch available? or any workaround that I have to ask?
Thanks in advance for your help.
Hello
VMware server 2 is end of live for 2011...
So, no official patch vmware will be available.
Maybe if you search the web, you'll find something.
You should take in mind for migrating from vmware server to another vmware product.
In any case, if your vmware server is not directly connected to the INTERNET, the risk should not be so high.
Best regards
Pablo
-
Your server has not installed PHP, or PHP is disabled by mistake.
I am trying to install WordPress from a download and get on this error error: PHP is not running. What I can do.
Sound your server error, not firefox question.
If you try to install wordpress locally, use WAMP server
If your installation on your server or hosted server, contact the admin
-
I just install CS5 and now when I edit a code on a page that I did not define a server teasting on (I have it) then save it I get a nag "dynamically related files can be found as a test server is not defined installation" How can I get rid of this rotten nag? He drives me crazy.
See
-
Can not activate sharing / "unable to configure the workstation server.
Everything was going well until I made the mistake of upgrading to 12.1.1 build-3770994 12.0 (?)
For some reason any sharing became disabled after upgrade.
I can't activate the sharing, I get "unable to configure the workstation server.
Seems every time I've upgraded to VMWare Workstation, something breaks
I had to moce the VMs shared virtual machines 'normal' so I could run them.
I fixed it, uninstalled and reinstalled and still the same failure.
I took a look at the downloaded files and datastores.xml is empty, which is a little weird.
Hostd.log, he crashed during the analysis of the datastores.xml file:
2016-05-26 T 10: 11:07.572 - 07:00 verbose spend [08848] [sub Originator@6876 = Hostsvc] StorageNativeProvider: inventory filepath is C:\ProgramData\VMware\hostd\datastores.xml
2016-05-26 T 10: 11:07.573 - 07:00 panic pass [08848] [Originator@6876 sub = default] error: class Vmacore::Xml:XMLParseException(not_well-formed_(invalid_token))
2016-05-26 T 10: 11:07.580 - 07:00 panic pass [08848] [sub Originator@6876 = Default] backtrace:
You may try to remove the config files during uninstall Workstation, and then reinstall the workstation.
Maybe you are looking for
-
How to stop a task in the message Manager model pending
I use the base Manager messages queued to separate my event handler and tasks. An event on the front (button) Panel puts a message in the queue. When the queue handles this message, it performs a task. However, I will now add a button to the Panel
-
I have a UCS chassis with 8 blades B200 M3 (run 2.0.5a). Each blade contains a 1240 VIC and a 1280 of VIC. The blades have a service profile that is already associated with them and everything works fine. I bought cards cache for these EMC xtreme bla
-
Cannot install the scan of info is 3 lite, error 1633
Hi, I tried to install this on my laptop no success at all I just get the error code 1633 when you use low load for vista 7 from their Web site
-
No driver found for printer epson stylus office b1100
try to install on my laptop an epson stylus office B1100 printer.message appeared saying no driver found.
-
I get this error since I uninstalled an application called DriverCure. Now when I choose 'open with' any type of file I get this error this is really boring, I also tried reinstalling the app and also do a system file check, but it was of no use.