Similar Questions

• Links to the site fail on the local test server

  Using CS4/WAMP/XP, I have a test set up server. Everything works fine except that when I specify links to the site, on the testing server they not go back to localhost, localhost/Frances. They work very well on the online site, but not on my test server.

  This prevents me from using (and stable) "include" files for things like menus when parts of the site are in different folders.

  I have my setup of site as follows:

  Local news

  Name of the site 'FFG2009 '.

  Local root folder C:\wamp\www\Frances\

  By default the folder images C:\wamp\www\Frances\images\

  HTTP address: http://localhost/Frances/

  Test server

  Server model: PHP/MySQL

  Access: Local/network

  File of the test server: C:\wamp\www\Frances testing\

  URL prefix: http://localhost/Frances/

  In my Apache configuration file, I have a virtual directory that is set up like this

  Alias /Frances/ "c:/wamp/www/Frances / '.

  < directory "c:/wamp/www/Frances /" > ".
  all options + includes
  AllowOverride all
  Order allow, deny
  Allow from 127.0.0.1
  < / Book >

  I was informed that I could temporarily change the folder of Apache webroot on my record "Frances", but this stops other things like PHPMyAdmin to work. I also have other sites in my www directory and I don't want to change the rootweb Apache Directory each time I need to work on another site.

  Is it possible to set up my site in CS4 so that the root links site go to localhost/Frances rather than just localhost?

  Thank you

  Tone'z

  It's something I've had to do for some while now. Alias simply create shortcuts to a directory, they do not have their own directories 'Document Root'. I'm pretty sure you need to do is to set up a virtual host using WAMP (in fact, Apache, any installer is used). I'm almost certain that one of the books of David Powers cover the subject, but the one I apparently was already packed (moving soon).

  I followed the steps of http://blog.jlbn.net/?p=23 and it was quick and much easier than I expected. He missed for subdomains, but I found the solution quickly to the http://www.sitepoint.com/forums/showthread.php?t=394472 (I don't know why I didn't get it virtual host, but Google has gotten in the way :-))

  So now I have http://localhost , http://test.localhost and a true domain that I own (it's not hosted online) all running on my local computer.

  In your case, you might want to implement the subdomain http://frances.localhost so as not to cause interference with the actual domain name. Or make sure you have the server offline. If you don't know how to do this in the file httpd.conf, then in WAMP, it's two mouse clicks: WAMP-> put in offline mode. It is a good idea in any case

  Thank you for pushing me to learn how. It was high time that I updated in any case my installed WAMP.

  HTH

  --
  Mark A. Boyd
  Keep-on-Learnine :-)
  This message was processed and published by Jive.
  It will not be considered an accurate representation of my words.

• Test Local PHP Server works not!

  Hi guys,.

  I just set up my server to test local PHP, even if its does not work properly! If you could help that would be so wonderful!

  Here are my current settings:

  The local Site folder: C:\XAMPP\htdocs\valsoo\

  Web URL: http://localhost/valsoo/

  Folder on the server: C:\XAMPP\htdocs\valsoo\

  Local/network

  Server model: PHP MySQL

  I'm testing the "local testing server" with a file called site_check.php, who works at the root of the folder of the Site Local (C:\XAMPP\htdocs\valsoo\site_check.php), but does not work when the file is within records (C:\XAMPP\htdocs\valsoo\lesson01). Not all the files of work either at the root. ANY SUGGESTIONS?

  Thank you very much!

  Brentis wrote:

  I deleted the C:/htdocs, but it changed nothing.

  That does not surprise me. If you have difficulty with the files could not be found, simply remove a folder will not help. You might have deleted the record sought by the browser.

  Assuming that XAMPP is installed, make sure that Apache is running and then type http://localhost in the address bar of browser to load the XAMPP admin page. Click on the link of the phpinfo() function in the left navigation sidebar and find the value of DOCUMENT_ROOT in the section Apache environment.

  Once you know the correct location for DOCUMENT_ROOT, you should be able to put your files in a subfolder of the DOCUMENT_ROOT folder and define your test server correctly in Dreamweaver.

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• Is it possible to use Dreamweaver with WordPress (has the classes by Joseph Lowery) only uses a test server AWS and not an environment local localhost?

  Is it possible to use Dreamweaver with WordPress (has the classes by Joseph Lowery) only uses a test server AWS and not an environment local localhost?

  Yes, I want to talk and EC2 instance and I am able to do Dreamweaver to easily connect using SFTP which I believe is a SSH protocol. See the image below. This method works.

  I currently have a test instance and will finally have an instance of production when the site is finished.

  Local environment is not installed on my workstation and my thought was that put it on the server would allow transparent operation including scripts on the server side. The testing station is not public.

  

• File not found: includes/common/lib/file_upload/KT_FileUpload.asp please download him includes / folder on the test server.

  The cooperative, I belong to have a home page made with Dreamweaver, several years ago. Some of the pages suddenly stopped working with this error message:

  File not found:

  includes/common/lib/file_upload/KT_FileUpload.asp

  Please understand that download / file on the test server.

  I checked, and the file is actually missing on the web server. What I have to buy Dreamweaver to download this file, and it is a path worth pursuing?

  Dreamweaver version: I don't know who or how to check this, could check if given appropriate instructions.

  The page you have shown uses one of the InterAkt extensions for Dreamweaver. Unfortunately, InterAkt was acquired by Adobe, which, in turn, did nothing with it. The latest version was about 5 years ago and was called uninstall.

  Maybe someone here can help you friends of Interakt: Home Page

• Setting up a test server. Getting the error "Could not connect to MySQL". Help!

  First of all, I am a rookie at this, so please excuse me for leaving out some details.  In any case, I followed David Powers "establishing an environment of PHP for Dreamweaver development" set up my test server.  I tested the timetest.php file and everything works great.  I saved my website in its entirety and extracted its contents in my folder xampp/htdocs/php_test/CIM.  'CIM' is a file that I created to hold the content of my entire site.  I get an error message when I try to access my index.php file.  When I click on 'Live View', I get 'database error: unable to connect to the database: could not connect to MySQL'.»»  My index., is a php file in xampp/htdocs/php_test/CIM/public_html/store.  I too, started with Apache and MySql running XAMPP.  What I am doing wrong?

  If your timetest.php is like this:

  This page was created at 
  
   on the computer running PHP.
  

  So which proves that you have PHP work.  I want to talk in DW when you try to establish a database connection.  Based on your error page there is no connection to the database.  The screen I'm talking about is:

  

• DW 8 do not recognize the test server

  I'm trying to set up a test server in Dreamweaver 8 on XP. The web server is IIS running on a Windows Server. I'm mapped to disk sharing where the wwwroot.
  In the "Site Definition" dialog box, under test server, I chose "asp vpscript" as the model of server, ' Local/network' for access and pointed to the network share for the "test server" folder
  After clicking ok and open a new asp document, all the tabs under 'Request' tell all ' to use dynamic data on this page:...» "Every thing is checked except"the test of the site Server Configuration.
  No matter what I can not do DW to acknowledged that the testing server has been implemented.
  
  Anyone know what to do at this point?
  Thank you

  OK, I thought about it. DW 8 is not happy if you use an IP address instead of a domain name for the URL prefix. I put the URL prefix for the DNS entry for our development server and everything works fine now.

• WPSM54G cannot find print server and not able to print the test page

  After several days of trial and error I am so far I'm willing to give up and put this peace of equipment for sale. It is my last attempt to find a solution.

  I have a Canon MP510 printer connected to the print server and I managed to configure the print server so that it establishes a wireless connection to the router. I can see the ip address assigned to my router print server and I can log on to the configuration of the print server page.

  When I want to set up your computer (software print copy of the Canon MP510 print server) I can not complete the wizard. Step 1 is successful. It shows the print server and the MP510 related to port 1, but in step 2, I get a message that the print server can not be found.

  I looked on the forums how to solve. I already tried a fixed ip address to configure the printer manually but not any which solution worked.

  Your print server must be set to a fixed IP address, try this IP address: 192.168.1.78... Disconnect ethernet cable between your router and the PS... Both devices power for one minute cycle... Follow the link here after changing the IP address on the PS...

• ACS secondary server does not authenticate users through 3850 WLC

  HI - I have a question that my secondary ACS server does not authenticate users when the primary is taken offline.  My configuration is:

  3850 WLC by using the code version 03.07.00E

  ACS Version 5.6 (primary/secondary)

  The two ACS servers added to WLC (ACS-NLBP-01 (primary) / HEN-ACS-01 (secondary)), defined in the Group server (ACS_AUTH) and also the method list (ACS_AUTH).  List of the ACS_AUTH method is then applied to the SSID.

  A 'test of ACS_AUTH aaa server group' command for the two outcomes of ACS server as a result of access.  Communication IP/Radius is operational between WLC and two ACS servers.

  configuration of 3850 also attached for reference.

  Any help would be appreciated.

  Thank you

  Scott

  Please add the below listed orders and test again when you can.

  Server radius # deadtime $min$
  retransmission of radius-# 1 Server
  # Server radius-dead-criteria times 5 tent 1

  Configuring settings for all RADIUS servers

  HTH

  ~ Jousset

• The DNS server does not - wired - wireless is OK

  Hi all

  This problem has left speechless several other computer scientists, I thought I'd try this forum before making a complete reinstallation.  Here's a challenge to test your intelligence.

  Here's the situation:

  Dell laptop (11 months - still under warranty) with Wi - Fi and ability.  Originally supplied with Vista, but I installed Win7 in November.  I tried to do the clean installation method, but do not know if I managed to 'clean' approach because I thought that my data may be wiped.  He was not, he is still on the machine.  But W7 seems to work very well, I added Slowey some software.  I think I was able to communicate with a wired connection before on the machine, but now I can't be sure.  The machine communicates wireless without problem.  IE8 opens fine.  If I connect the wire and cut the antenna or boot to the wire with antenna, the machine starts and works well, but does not connect using IE8.  I get a message "the DNS server is not responding.

  The machine can ping and ping just fine on the wire.  A chat session with Dell yesterday (Citrix I think) succeeded in transferring to wire wireless when I turned off the antenna.  In addition, the MS patch notification came through this morning, but I can't download the patches on the wire.

  Here is what has been tried so far:

  1. Changed cables and ports in the router to check the status of these question: these are OK.
  2. PC directly connected to the router: same problem.
  3. Verified services running (Control Panel-Admin tools-Online Services online):
     System event COM + (for WZC issues)
     Computer browser
     DHCP client
     DNS client
     Network connections
     Network location awareness
     Remote procedure call (RPC)
     Server
     TCP/IP Netbios support
     Automatic configuration wireless (only XP wireless configurations)
     Autoconfiguration WLAN (wireless Vista only configurations) service
     Workstation
  4. Verified IPv4 is defined in order to obtain the IP address automatically.
  5. Reset IE8.  No change.
  6. Turned off the Windows Firewall.
  7. Tried to access internet using Chrome.  No go.
  8. Wired NETWORK card uninstalled and reinstalled driver.  Downloaded last at Dell, they pushed also later.  No luck.
  9. Tried the Google Open DNS.  No difference.
  10. ipconfig/flushdns
  11. TCP/IP stack repair (run as Administrator: start, all Programs\Accessories and right click on command prompt, select "run as administrator" to open a command prompt.)
      -Entries reset WINSOCK to default installation: netsh winsock reset catalog
      -Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log
      -Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log
      
  12. While in Safe Mode, disconnected wire: uninstalled the driver for the CARD.  Started full W7: installed the latest driver.
  13. In Safe Mode, the stack TCP/IP repair as described above.

  All to nothing does not.  IE does not connect to the internet.  Chrome is not connecting to the internet.

  You people have any ideas what the devil is wrong with this machine?  Can you offer any suggestions to try to get access wired for the functioning of the internet?

  Thanks in advance!

  Hello Stringout,

  I said to reset the router because the router is the DNS server and assigns the IP address to all devices on the network. Now, since you get the error "DNS server is not responding. It may possible that this router is not able to assign the correct ip address to all computers.

  You can also try to update the router with the latest firmware. Still, Microsoft!

• Setting up a test server

  Hi - I'm going to set up a test server for the first time in cc DW.

  First, I installed MAMP (I'm on a mac) - I tested the servers and they work. I chose the default ports 80/3306. I pointed my browser to localhost and it says it works.

  Then, I spent in DW and defined the site - everything seems fine. In the "files" window, I can see the local section of the files on the right and on the test server on the left (the records are in red - is it good?). My problem comes when you try to view the live files. I get the following error message

  Not found

  The requested URL /ticDevNew/index.php was not found on this server.

  Apache/2.2.22 (Unix) DAV/2 Server at localhost Port 80
  
  
  
  

  I have placed the files here on my mac:

  
  
  /Users/martinrtroberts/localhost/ticDevNew
  

  Here are the settings of the server in DW

  FOLDER on the SERVER: / Users/martinrtroberts/localhost/ticDevNew

  WEB URL http://localhost/ticDevNew/

  My hunch is that I have one of these incorrect paths (despite the fact the DW appears to able to see!)

  Any ideas?

  Martin

• Question to have a test server and a remote server

  Hello

  using DW CS6

  I have my site on a XAMPP test server configuration. Now, I want to publish to a remote server. When I select the remote server, he wants to define me a site. This means that there my site listed twice in the box site definition. I see that there the site twice at one point going to cause me some confusion. It is necessary to define the site twice? Is it possible to have distance and test on the same site definition go on two different servers?

  I ask is because the test server is new to me. I use to have the site put in place in a folder on my computer and the site definition was the remote server if jump between the two was quite simple. I wonder if it's possible that now, I have the site on XAMPP.

  Thank you

  When you created your site in Dreamweaver, you give it a name and set up a local site folder, right? You should not do it twice to add a remote server.

  In the Site configuration > servers, you 'll have to define a new server, however if you want to keep your test server. But this should be no conflict, because they are both pointing to the same local folder in XAMPP, right?

  If I know I'm going to need a test server, I make sure that my site folder is in my XAMPP/htdocs/folder. In this way, that I don't have to worry about having to keep track of two versions of the same site. Then when it's time to upload it to the remote server, I'm just adding a new server and checking the box "Remote".

  A site, two (Local/network and FTP servers), no conflicts.

• Test server for Site Dynamics w/Leopard

  I'm trying to set up a PHP / site Spry using a Mac running OS X Leopard operating system. I'm using a PHP book that is very useful, but it has been written using Tiger and Leopard eliminated the Netinfo Manager. I had to change many 'hidden files' and use the Terminal & BBEdit to edit files and create any virtualhosts.
  
  I have the latest version of PHP installed (10.5 x has integrated Apache, but it needs to be changed). I am in communication with my ISP, but I can't get past the error messages (I had to modify "php.ini" to report all errors) telling me that my definition of site for the local test server is incorrectly set up. I tried to use the root of the server computer, the folder from the site in the folder of the user and virtual hosting.
  
  I am told that two files in my folder of the virtual server, which resides in my folder user with the extension ".php" are not executed by the testing server OR this folder is not mapped with the URL on the testing server. He asks me to verify that the URL prefix corresponds to the root of my site.
  
  That's what he said when I use virtualhost; I get a similar message when I use the other two test local server configuration mentioned above. I followed the instructions in the book with a lot of attention, and I'm afraid that I made a mistake in some of the editing I've done for hidden files.
  
  Does anyone know do this with a Mac running the latest version of Leopard?
  
  Configuration of local test for Leopard servers is something that a lot of people talk on the web. I have read of many methods of creating and deleting accounts and virtual hosts. Perhaps my problem is that I tried the advice of many people who have experienced this problem with how Apple withdrew the Netinfo Manager when leopard is released. The need to modify the httpd.conf file is in most of these suugestions.
  
  The thing that scares me is, is that I was told to type http://localhost/ and see if he showed me a screen showing that the Apache web server is running. This works.
  
  I was advised to do the following:
  Create a page called test.php, and type the following code:
  <? PHP phpinfo();? > save to HD:Library:WebServer:Documents Macintosh.
  Load the following URL in your browser: http://localhost/test.php
  If you see PHP configuration screen, you are operational! Well, I get a message to report
  Safari can't open the page "" http://localhost/test.php " because it does not connect to the server 'localhost'."
  
  I'm stuck. What should I do? Check the various changes I made? I'm looking for help to set up the local test server. Perhaps the book I use (which was written for Tiger) does not go in what is what seems to indicate I have implemented in the Site definition. Or I messed up an important file. I'm new to the terminal and BBEdits to these Linux files using my computer.
  
  I remember one of them/private/etc/hosts said, "Do not change this entry."
  
  Told me to create a host and copy the existing settings of the local host (127.0.0.1)
  
  But it helps when they show examples. As you can see I am confused.
  
  The book is outstanding - it is written by David Powers. The only confusion is this leopard / test server problem.
  
  Help!
  
  I use 10.5.2 and the latest version of PHP / Apache and Dreamweaver CS3.

  The space in the name of the folder of two words was not only a problem; the fact that I do not name the folder 'egdwcs3' the biggest problem. As soon as I renamed the folder 'egdwcs3' it became a match for what I had called in the file/private/etc/hosts as localhost (127.0.0.1 egdwcs3).

  When you told me told to rename the egdwcs3 folder I have (at the beginning) renamed Essential_Guide and, of course, always gave me error messages. Then it struck me that I did follow your advice 'to a T!

  I wasn't getting what has been defined as the host should be identical to the name of the folder in the root of the server. Somewhere along the line, I saved a file in this folder wrongly named "egdwcs3.php" and I was looking at the files in Chapter 4 of the examples for the book uploaded folder files and I noticed there was no classified named 'egdwcs3.php' - one mentioned "datetest.php" that was when I had my Epiphany!

  Now when I look at the file datetest.php with the button data direct I see today!

  Consider this "Case_Closed.php!" and thank you, David!

  Once again - great book!

• How to save files w/out php test server?

  Don't shoot me, I'm not totally a techie. I know HTML fairly well, but not PHP. But I took over maintenance of a site built with php. I use DW MX and never installed php. The site does not have something dynamic, but it uses includes. This is perfect, but this is the problem:
  
  My client purchased DW8 and is now supported maintenance himself. It's less geek that I am, indeed, but he used DW4 without problems. So he's trying to play with the site, create a new file and save it with his DW8. But he gets an error message saying that it is supposed to define a test server. I told her to go in the sites section to modify and specify "none" for the server model and access (this is how I set it up with my DW MX). He said he tried and it still will give him back his files.
  
  So is it possible to tell Dreamweaver that even if he uses a .php extension, the files should be tested on-site? I'm having a hard time to help him with a product that I have not yet.
  
  Thank you.
  
  

  > I wish I could help him. Any other ideas?

  Tell him to afford temporary files in its preview in browser preferences.
  Who will do the trick for him...

  PREFERENCES | Preview in browser > activate the Temp files

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "barngirl" wrote in message
  News:elahnq$M2Q$1@forums. Macromedia.com...
  > It try to click No and has not helped. I asked exactly what happens
  > (since I don't have the software myself) and this is what he said:
  >
  >

  Quote:
  When I try to display the php page (with the test server options
  > close
  (> off), DW says? To see a preview of the pages containing code server-side, you need a
  > test
  > server. You want to specify one now? When I click No., DW displays a
  > dialog box to download that says what it? s download a php script. After the
  > script
  > is downloaded, nothing happens. I have? m do not know if something is in fact
  > downloaded. Once the download dialog box shows it? s done, do I? m
  > back to
  > web page design/original code mode.

  >
  > I wish I could help him. Any other ideas?
  >