Can't access bios dv3500

Similar Questions

• How can I access BIOS?

  Title: original passport / BIOS

  Does not start with Passport attached to the USB port...  Said to eliminate "USB boot" from the BIOS.  How can I access BIOS?  The support fellow WD told me to push "F10" at the start, but it just sent me multiple choice starter.

  Depends on the brand and model of your system. When the initial screen, you should see similar instructions to "Press F1 to enter setup". F1 is just one example. It might be F2 or DEL or any other key. You disable and then boot from a usb device. The problem should be solved.

• Re: Satellite A500-1GL - Can t Access BIOS aftre updated

  Hello
  I have a laptop A500-1GL.
  Yesterday, I checked that the drivers download page, just to check if there is something new. and I noticed that there was a new version of the BIOS.

  My old BIOS:
  SystemBiosVersion: 1.6
  SystemBiosDate: 05/06/10

  the Web site was:
  Version: 1.7
  Date: 29/07/10

  So, I downloaded this file and flashed the BIOS... after the reboot, I checked the "regedit". and the version was changed to 1.7, but the date remains the same (05/06/10)!

  Now, this isn't a big problem - I know, but I wanted to check the BIOS configuration (before the start).
  So I restarted the laptop, you press "DEL"... nothing happened, went straight to Windows!
  I tried again, with F1, F2 ~ F12... anyway.
  So, how can I access the BIOS Setup screen? I tried re-flashing the BIOS again, but he keep saying that I already have the new version, so I can't flash.

  any ideas?

  Hello

  > So, I restarted the laptop, you press "DEL"... nothing happened, went straight to Windows!
  > I tried again, with F1, F2 ~ F12... anyway.

  It looks at, start fast, active in the Bios. Read this thread, the Andrusito guy explained how he has disabled it:

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=208999#208999

• Can't access BIOS - Portege R500 PPR50E

  Hi, it seems that I cannot access the BIOS on my Portege...

  My BIOS password sometimes but I tell myself that I need to access BIOS immediately after that.

  What is the correct combination please? It's ALT + F12? It does not work... :(

  Thank you!

  Hello

  I think that the laptop uses the Toshiba BIOS and that is why you need to press F1, immediately after the laptop has been powered.

  Check out what I think it will work.

• Satellite A110-179 - BIOS password has been changed - can't access BIOS

  Hi, everyone:

  I have a problem with my toshiba satellite A110-179.
  I'm not exactly how, my computer has set a user password CMOS, which completely avoid me access to the BIOS, or a correct boot system settings.
  So I Don t know to restart the CMOS settings, to remove all configurations, the user password that is included in this.

  I been reading about the process of possible resetting my BIOS of the laptop, so I can't find exactly how do, so everyone know that it is impossible in laptops from Toshiba, reset the default installation settings.

  Is this true?
  Can I do something?

  Please, explain the process. I'm completely hopeless on this issue.
  Excuse my terrible English, it has been forgotten.

  Thank you, for your help.

  Best regards from the Spain.

  Hello

  Is the password of the BIOS cannot be deleted by the user if the user doesn t know this password.
  In this case, the ASP from Toshiba (certified partner) must be contacted in order to remove this password.

  Sorry mate but to my knowledge, there is no other way to remove it
  Therefore, get in touch with your ASP and ask for help!

  Good luck

• be hpe530: can't access bios

  After updating the firmware to 7.15 the system restarts fine
  The second time was select the boot device to obtain hollow the boot process
  The third time I changed the boot order in the bios and from that moment, I was unable to do something
  I disconnected the sata drives and battery to reset thr bios but success witjout
  I am unable to access the bios pf10 stille
  What can I do else?
  Windows 7 64 standaard hp installation environment (with a bootmgr I guess.. original hp installation)

  Thx for your answer, but I was not able to access the Bios with the F10 key

  I solved the problem by unplugging the battery and the 220V taken during 2 min...

  From that moment, I could access the bios.

  But my first problem was solved not (bootmgr missing)

  Months ago, I copied my system on a ssd and it worked without changing anything on the partition definitions

  After installing the new firmware, I received the message "bootmgr." missing

  I started a "partition mgr" by starting from the cd and noticed that my old drive without system has been defined as active

  The ssd with the system on it was not "active".

  I changed the 'active' and on the next reboot, a HP utility (?) noticed a problem and automatically repaired

  == > All problems solved

  I installed a new firmware because I thought that the time between the market and the login screen was taking too long for one SSD boot (40 seconds)

  Once you log in to windows it happens very fast

  Is there a solution to reduce this time-out before the login screen, or is this normal

  Thanks in advance

• Can't access bios on Y580 Windows 8

  After the upgrade to windows 8, I can no longer access the bios. The lenovo screen appears at startup, but no startup option. And just to make sure, as someone who still has windows 7 please tell me which key allows you to participate? I tried everything, but I'm stumped.

  Hey Tyler,

  Please see article "how to get into BIOS...

  http://forums.Lenovo.com/T5/Windows-8-knowledge-base/how-to-get-into-BIOS-after-win-8-upgrade-or-on-...

  Zehn

• Pavilion p7-1254: can't access Bios - Windows 7 pro

  I tried the methods "F10" and "esc" while restarting, but whenever I do, I get in a configuration screen of HP with no way to get to the bios.  I just installed a hp amd radeon graphics, that works very well. However graphics originally included is automatically disabled. In order to use my sound bar speakers, I need to get into the bios, so I can enable the audio part of the map. Thanks for any help.

  You repeatedly type the F10 key at startup to access the BIOS

  This will help you with the setup of the BIOS:

  http://support.HP.com/us-en/document/bph07110

• HP laptop - 15-r224tx: can't access BIOS without password

  I try to access my BIOS but do not have the administrator password.

  When trying to jump by pressing on enter it fails and I get a message "system disabled [12345678]."

  The most recent value included in the disabled system message is 68026369.

  Can you please provide the password so I can access my BIOS?

  Hello

  Use the code to reset below

  77984969

  If the above does not work, follow the steps below to link to generate the reset key

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/system-halt-error-message-or-BIOS-password-reset-generator/TD-p/5010033

• H8 - 1420t envy: Hp Envy - can't Access BIOS Can or Start Menu after replacing HARD drive

  Hello!
  
  One of my friends has problems with their computer and gave it to the difficulty. First thing I did was try to start it up and it didn't not even start. He tried the auto repair and failed. Then attempted to fix startup problems via the Win8 splash screen and doesn't have too much that. So, I tried a refresh and even that failed. I took out the hard drive, connected on my PC at home and save all the data I could find. I had problems with some data and often he would crash my windows explore (as my friend told me that he did while they were using the PC), so I've determined the drive HARD shot.
  
  Got a new HARD drive and put it in. At caught my drive of Windows 8 and slapped in. When I went to start the PC, I tried to hit all the keys BIOS I could think: Esc, f2, f8, f10 and f12, del even. Nothing has worked. He's just sitting at the HP logo and then after about 20 seconds, he went to a black screen that says something along the lines of "not detected no boot disk".
  
  I can't boot into the BIOS. If I plug the old drive hard when I get to the blue screen of Windows 8 start with parameters such as the "Refresh" and "reset the PC. If I try to access the CD/DVD drive under the 'Remote access' button, I get a black screen with a cursor. It just freezes there. If I try to access the settings of UEFI, it freezes in the blue menu with functions.
  
  I don't really know what to do here. I'd appreciate any help! Never had a problem this stubborn before.

  Wanted to just go back and say I have solved my problem.

  The computer didn't like the keyboard I used! I caught a pretty generic keyboard that was laying around and plugged him that. Hit Esc at startup led me to the boot menu.

• Can't access BIOS laptop Windows XP Pro system, because it is secured by an unknown administrator password.

  I bought a laptop Compaq Presario X 1000 Goodwill Industries. It has Windows XP Pro installed and is secured by an unknown administrator password. When I try to access the system BIOS at startup, it calls the administrator password and denies access. How can I remove this password for the BIOS settings? Everything I've tried so far has failed. Please notify.

  If you're at it, you could open the laptop and find the BIOS battery - I think that if you remove for about 15 minutes, and that should reset the BIOS.

• HP Envy: Monitor does not respond to the connection of Windows, so I can't access BIOS

  I recently bought a hp desktop computer and installed a Sapphire double-X 270 of R9. After installation, I noticed six long beeps BIOS at startup. I have this attached to caused by the UEFI who need Legacy mode. The real problem here is that I can't get to the BIOS, my keyboard and the monitor do not respond until it starts with windows sign in screen. Until then the monitor is in standby. The same thing happens if I boot from the BIOS through windows. I have 10 windows to be clear. Here is the pc http://www.officedepot.com/a/products/848252/HP-Envy-Desktop-Computer-With-6th/

  Remove the new graphics card and the original graphics on Board allows to boot in the BIOS/UEFI. Change your Legacy for UEFI, install your new graphics card and you should now have access to the BIOS/UEFI during the amorçage using the new graphics card.

  Don't know if your original post on six beeps at startup meant that you had already tried to start with the new card in UEFI mode but that he was still unable to see anything pre-seed?

• I can't access BIOS

  I have a problem with bios access on my laptop, I tried to remove the cmos battery, and yet he continue to request password. I tried hp support steps by pressing the windows key and b with the power button, but it will not be displayed, it's just a blank screen, I waited but still blank please help...

  @Kinnylord

  When asked for the fair shot password enter 3 times.

  After any code to stop.

  What model laptop do you have?

  REO

• Can't access BIOS on the computer laptop 15-R030wm

  I have a laptop that was recently dropped, and since then, I found that the hard drive has been damaged during the process.

  I bought a new hard drive and installed the drive and I wanted to get into the bios so that I can change the device to boot to a USB key... but I can't get into the BIOS.

  I tried the tapping/now the key ESC, F1, F2, F8, F9, F10, F11, F12 to turn all this without success. I have tried removeing the battery and the charger to the laptop and now the power button down for 30 seconds. Still no luck.

  The system starts just a screen that says;

  Not found boot device. Please install an operating system on your hard drive. Hard drive (3F0).

  Anyone have any ideas?

  Well then... I'll answer my own question.

  Connect a USB keyboard with separate 'F' keys and press F10.

  Well thanks, it works!

  You are welcome!

• Computer lockout windows laptop 7 - can't access bios or change start-up. Even change the hard drive has failed

  HELP! @ I got locked out of my laptop with a password that appears immediately at startup.   nothing works to get around,

  cannot enter bios setup or change your startup.  3 tries, then "System Halt" appears.   I even tried to change the hard drive to reformat

  He and restore again.  No change.  It must be a bios password that I never have.  Any ideas how to get control of my back to laptop?

  Moved to Virus and malicious software Forums.

  Hello

  For problems of BIOS passwords, you will need to contact the manufacturer of your laptop.

  We can not help you because of Microsoft's policy.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.