Can't access to the volume when turn on Satellite

Similar Questions

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.

• Lost access to the volume after upgrade 4.1

  Setup

  1 x HP c7000 blade box

  3 x HP BL460cG6 with dual Xeons 5540 and 48Gb of RAM, cards ISCSI HBA, QLogic

  3 x HP P4300 Lefthands

  4 x 3020 Cisco switches for blade in the back the c7000, 2 x dedicated to iSCSI traffic

  vSphere 4.1 Server

  The problem

  We went through the entire process of upgrading our server for vSphere 4.0 to 4.1 to manage a stand-alone ESXi 4.1 system, so our attentions turn to our 3 blades running ESXi 4.0u1 we used the built in Update Manager, downloaded the 4.0 to 4.1 upgrade file and we have improved our first blade and it did not notice problems as there put servers have was little used those.  We then upgraded the second and moved our main mail on her server.

  It was when we did that we started getting errors when people were losing connection to the exchange server, after some research we've seen of the event and we have been to see the error:

  "Lost access to the volume because of connectivity issues."  Recovery attempt is underway and the results will be available shortly"

  Then 10 seconds later we get the message:

  "Successfully restored access to the volume due to connectivity problems."

  This error only occurs on the blades of 4.1, we have restored a blade on 4.0 and errors are not displayed and no errors were reported with the servers on this blade.  As far as we can say it is not a network problem since all blades for iSCSI traffic flows on the same switches to the Lefthands, and we were losing the connection to volumes on the two Lefthands.

  We have a call connected with HP about this, but from the Yes, we cannot determine what is causing this problem and how to solve.

  So any help is greatly appricated

  Thank you

  Dave

  This is due to a combination of ESX(I) 4.1, QLogic and version Lefhand SAN/IQ 8.5 with the 10092-00 patch version. I did a blogpost on his problem:

  http://yuridejager.wordpress.com/2011/02/07/lost-access-to-volume-error-with-hp-lefthand-san-storage-after-upgrading-to-vmware-vsphere-41/. I hope this helps.

• Why can't access all the options on the options screen

  Using Firefox 40.0.2 and find that when I try to access the options screen, it shows, but I can't access all the options it contains, including passwords. This has only just begun, so this would indicate a problem with this version. How can I or yoy, solve this problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My helmet is bright red, and the speakers does not work, when I try to adjust the volume when there is no headset/speakers in, there is a sign of the cross as the symbol of the volume where the places are supposed to be, macbook pro retina display

  My helmet is for some time, as the eye of the terminator, glowing and speakers have not worked since. I need to plug headphones or external speakers. Whenever I try to adjust the volume when it shows just a cross symbol under the sign of the volume, where small squares usually are (see below)

  

  Is there a way to fix this? Some other similar forums tell me to try to manually move a switch in the audio jack, but I can't seem to find such a change and the thing that seems most like a light switch, does not move.

  Can someone please help?

  Thank you

  Your audio output is stuck in optical mode, this is the red light.

  The solution is to try to insert and remove the plug a dozen times or more in the hopes of convincing making fall out of optical mode and in electric mode.

• Can't access to the following endpoint: (external Web service)

  Hi all
  
  I'm trying to connect to a web service using WSDL, which is given by the osm, using Oracle SOA.
  I created the emconsole key file and created the user in adminconsole and applied the wss_http_token_client_policy to this webservice. When I try to connect to the Oracle SOA web service, I get exception below:
  
  < env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env >
  < env:Header / >
  < env:Body >
  < env:Fault >
  env:Server < faultcode > < / faultcode >
  oracle.fabric.common.FabricInvocationException < faultstring >: can't access to the following endpoint: http://hostname/osm/wsapi < /faultstring >
  < faultactor / >
  < detail >
  < exception > unable to access to the following endpoint: http://hostname/osm/wsapi < /exception >
  < / details >
  < / env:Fault >
  < / env:Body >
  < / env:Envelope >
  
  Can someone help me in problem solving.
  
  Thanks in advance,
  Ajay
  
  Published by: Ajay8706 on October 18, 2012 23:36

  Try the wss_username_token_client_policy

  Check here: BPEL to invoke the secure with HTTP Basic authentication Web service

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer. I prefer Firefox. Help!

  Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• I have a desktop PC with windows XP (Professional) on this subject, but I can't access to the pc through the remote desktop tool.

  Remote Desktop does not work

  Hello

  I have a desktop PC with windows XP (Professional) on this subject, but I can't access to the pc through the remote desktop tool. I already checked several options, but nothing seems to work. I don't even get an error message, the window just those which blinks and nothing happens...

  Could you please help?

  This is wat I already checked:

  -"allow users to connect remotely...". ' is running

  -TCP/IP listening on port 3389

  -Terminal services are started

  -J' tried connecting to Windows 7 and Windows XP, nothing works

  -Ping the ip address of the client PC works fine

  If you have any other ideas, I would be very gratefull!

  Thanks to advandce

  You will probably need to open port 3389 on your router so that it maps on the computer that is tuned to the connections of the DRC. It seems that you did all the other steps, but your router can prevent the connection to go anywhere. Here's a detailed guide to configure your router for DRC that can provide some guidance.

• I can't access all the files on my computer, the window that ask to OPEN WITH the keep on poping up upward

  It just happened today while I was browsing the internet. now I can't access all the programs. ask (open with..)

  for example outlook express or any other... my anti virus support said it is not a virus... could be updated to hp that does not fit my computer? no idea

  what I can do. I have a lot of important information on the computer, I can't lose

  appreciate the help

  Start in safe mode / networking if it works. Then download malwarebytes to day then do a full scan

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• I have an active instagram account but I can't access despite the fact that my user name and password are correct.

  * Original title: INSTAGRAM BETA

  I have an active instagram account but I can't access despite the fact that my user name and password are correct.

  How can I fix?

  Help, please.

  You will need to contact Instagram.  We have no knowledge of their systems

• I bought the kit the student creative cloud after the expiration of my first free month of the trial.  Now I can not access all the apps.

  I bought the kit the student creative cloud after the expiration of my first free month of the trial.  Now I can not access all the apps.

  Hi zackf49452714,

  I'm sorry for the inconvenience caused.

  Please follow the steps https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Let us know if this helps!

• "Access to the volume, batch" on a daily basis

  Hi all

  In the hope of a few tips see where to look because we know so many questions.

  The environment is:

  ESX 5.5 (last version update of this week)

  HP ProLiant BL460c Gen8 blade

  Brocade FC switches

  VNX5400 storage

  Everything is current patch level (HP Feb SSP, latest drivers etc from the latest edition of VMWare/HP Cookbook)

  On a daily basis, we see the messages of the following:

  Lost access to the volume 52e00703 - 7702b 882 - d845 - a 0017, 4779402 (data store) because of connectivity issues. Recovery attempt is underway and results will be communicated shortly.

  05/07/2014-07:50:16

  Access to the volume 52e0072b-0adb69f0-f97b - a 0017, 4779402 (DataStore) connectivity issues.info successfully restored the suite

  Of the vmkernal.log, I see these messages:

  (2014 05-07 T 02: 44:14.860Z cpu0:33743) lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0: (0): 3271: FCP cmd x2a failed < 2/4 > sid x0d0505, did x0d0100, oxid xd4 Abort requested host Abort Req

  (2014 05-07 T 02: 44:14.860Z cpu0:32813) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x2a (0x412e80450900, 32805) dev 'naa.60060160fd503600ea66bd8acb82e311' the path 'vmhba0:C0:T2:L4' Failed: H:0 x 5 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

  (2014 05-07 T 02: 44:14.860Z cpu0:32813) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.60060160fd503600ea66bd8acb82e311' of device NMP doubt; asked the State of the fast path update...

  (2014 05-07 T 02: 44:14.860Z cpu0:32813) ScsiDeviceIO: 2337: Cmd (0x412e80450900) 0x2a, CmdSN 0 x 299 worldwide 32805 to dev 'naa.60060160fd503600ea66bd8acb82e311' has no sense H:0 x 5 D:0 x P:0 x 0 possible 0-data: 0 x 0 0 x 0 0 x 0.

  (2014 05-07 T 02: 44:15.859Z cpu0:32881) lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0: (0): 3271: FCP cmd x2a failed < 2/4 > sid x0d0505, did x0d0100, oxid xe7 Abort requested host Abort Req

  (2014 05-07 T 02: 44:15.860Z cpu0:32813) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.60060160fd503600ea66bd8acb82e311' of device NMP doubt; asked the State of the fast path update...

  (2014 05-07 T 02: 44:15.860Z cpu0:32813) ScsiDeviceIO: 2337: Cmd (0x413682f6e580) 0x2a, CmdSN 0x29a worldwide 32805 to dev 'naa.60060160fd503600ea66bd8acb82e311' has no sense H:0 x 5 D:0 x P:0 x 0 possible 0-data: 0 x 0 0 x 0 0 x 0.

  (2014 05-07 T 02: 44:20.025Z cpu4:36428) World: 14296: VC opID 4CAEF736-0000009 D-0-fb maps to vmkernel opID 4f50e1ac

  (2014 05-07 T 02: 44:20.397Z cpu1:34426) capability3: 15408: Max (10) attempts exceeded for appellant Fil3_FileIO (status "IO has been abandoned by VMFS via virt-reset of the unit")

  (2014 05-07 T 02: 44:20.397Z cpu1:34426) BC: 2288: cannot write (couriers) object '. iormstats.SF': level core exceeded Maximum attempts

  (2014 05-07 T 02: 44:23.013Z cpu8:34236) HBX: 2692: waiting for [HB State offset abcdef02 4161536 gen 179 stampUS 1629072438 uuid 536997 d 8-04a1ea9d-6c9a - 0017 has 4779402 jrnl < 2656233 FB > drv 14.60] expired on flight 'uk1 - san01:Production data store 3'

  (2014 05-07 T 02: 44:29.645Z cpu4:33106) lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0: (0): 3271: FCP cmd xa3 failed < 3/4 > sid x0d0505, did x0d0000, oxid xeb Abort requested host Abort Req

  (2014 05-07 T 02: 44:29.645Z cpu20:33044) VMW_SATP_ALUA: satp_alua_issueCommandOnPath:651: path 'vmhba0:C0:T3:L4' (UP) command 0xa3 failed with status Timeout. H:0 x 5 D:0 x 0 P:0 x 0 Possible sense data: 0 x 5 20 x 0 0 x 0.

  (2014 05-07 T 02: 44:29.755Z cpu7:32857) HBX: 255: recovered for volume 52e0072b-0adb69f0-f97b - 0017 has 4779402 heart rate (uk1 - san01:Production 3 DataStore): Offset [Timeout] 4161536

  (2014 05-07 T 02: 44:29.755Z cpu7:32857) [HB State offset abcdef02 4161536 gen 179 stampUS 1632947371 uuid 536997 d 8-04a1ea9d-6c9a - 0017 has 4779402 jrnl < 2656233 FB > drv 14.60]

  (2014 05-07 T 02: 44:31.808Z cpu0:32807) lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0: (0): 3271: FCP cmd x2a failed < 2/4 > sid x0d0505, x0d0100, x 112 requested Abort Abort Req host oxid fact

  (2014 05-07 T 02: 44:31.808Z cpu0:32813) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.60060160fd503600ea66bd8acb82e311' of device NMP doubt; asked the State of the fast path update...

  (2014 05-07 T 02: 44:31.808Z cpu0:32813) ScsiDeviceIO: 2337: Cmd (0x412e8349b000) 0x2a, CmdSN 32805 to dev 'naa.60060160fd503600ea66bd8acb82e311' world 0x2ab has no sense H:0 x 5 D:0 x P:0 x 0 possible 0-data: 0 x 0 0 x 0 0 x 0.

  (2014 05-07 T 02: 44:32.407Z cpu1:34426) capability3: 15408: Max (10) attempts exceeded for appellant Fil3_FileIO (status "IO has been abandoned by VMFS via virt-reset of the unit")

  (2014 05-07 T 02: 44:32.407Z cpu1:34426) BC: 2288: cannot write (couriers) object '. iormstats.SF': level core exceeded Maximum attempts

  (2014 05-07 T 02: 44:33.541Z cpu16:32855) HBX: 255: recovered for volume 52e0072b-0adb69f0-f97b - 0017 has 4779402 heart rate (uk1 - san01:Production 3 DataStore): Offset [Timeout] 4161536

  (2014 05-07 T 02: 44:33.541Z cpu16:32855) [HB State offset abcdef02 4161536 gen 179 stampUS 1646119268 uuid 536997 d 8-04a1ea9d-6c9a - 0017 has 4779402 jrnl < 2656233 FB > drv 14.60]

  Any help much appreciated.

  Thank you

  The problem was a combination of factors.  Specifically, THIN LUNS on EMC VNX with Windows 2012 R2.  It's to do with how 2012R2 TRIM questions and cancel orders MAPPING in the table.  Basically, he blows on MS and has a knock on effect on all LUNS.

  The thing in our case is that we have a chassis package HP blades, for the most part running ESX, Windows R2 2012... and we essentially had a single physical machine 2012R2 out the table in its entirety...

  Defrag on 2012R2 exasperated this issue and was a way to find the number of logic (light IO) massive unit on the Page file for example, LUN during the defragmentation operation

• My account says I paid for Adobe Acrobat [not Reader] DC, but I can't access all the features.

  My account says I paid for Adobe Reader DC, but I can't access all the features.

  [Title edited... MOD]

  did you buy or sign up for a subscription?

  If you subscribe, install the cc desktop application, if it is not already installed.

  then check that your current account (and only the adobe, used in the next step id is good) by logging in here and check the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html