can't boot from my dell recovery cd

Similar Questions

• Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

  Dell Latitude 10 ST2e compressed can not boot from an external optical drive USB (CD/DVD)

  The BIOS has no setting for it. It will boot from a flash drive. I would like to boot from my CD of 2013 Acronis Recovery Console.  Anyone have any success to boot from a CD/DVD USB drive?

  Yes, there is a way to do this.

  I just did this to install Windows 10 from a DVD on a tablet of 10 Latitude by following these steps:
  (Note: my version of BIOS is A08)

  1. turn off the 10 latitude power.
  2. attach a USB hub to the USB slot unique on the side of the tablet.
  3. fix a keyboard and an external USB CD drive to the USB hub.
  4. now press the button down on the side of the Tablet and simultaneously press the power button for 5 seconds (until see you the screen light up, but will be weak against black unlit).
  5. When you see the Dell logo, start typing on the F12 key (the lower right corner shows the option press the F12 key to choose single startup options)
  6. now start choosing appear with many options to choose from, including my CD/DVD drive.

  Hope it will be useful to you.

• Can not boot from the recovery disc - 0x000000D1 Driver_IRQL_not_less_or_Equal

  original title: cannot boot from the Vista recovery disc

  A real problem. Vista is prompting me to boot from my recovery disc and allow the repair of Windows. However, when I insert the disk it shows loading Windows, but once he starts to launch I get the BSOd with the "Driver_IRQL_not_less_or_Equal" error report with the error code Stop 0x000000D1. I searched on advice but all I can get into the repair mode, but I can't. F8 does not work in safe mode. Week last ChkDisc has run on every start and yesterday I received a number of parts of Vista won't load does not with error reports. Today, it started with Windows can not load the warning and instructions for use the recovery disk... I'm in a loop as I cannot cross the BSOD! Help please

  Mick

  Computers are strange animals. After my response to you, I had another attempt to go beyond the blue screen. Hey hop this time my computer decided that he had enough rest and proceeded without delay to start and I would like to action, the recovery disk. There then reinstall Windows Vista and am now to a new computer! It's time to move to Windows 7! The only thing I did yesterday was to unplug my printer to my laptop!

• Portege Z830 - can't boot from DVD

  I have a Portege Z830-11F. I upgraded my machine to Windows 8 and but I didn't like it. So I decided to do a clean install of Windows 7.

  I downloaded the file .iso on the internet and it was engraved on a DVD.
  I plugged in my external DVD drive, rebooted, entered in the BIOS and changed the boot order and restarted again.

  Everything went well and I was able to install Windows 7.
  But I didn't have the drivers, (thought the BONE would recognise the driver LAN at least, I was wrong)
  So I've upgraded to Windows 8 again (without restarting) just to download the drivers for Windows 7.

  I did, but now I can't boot from the DVD.
  When I enter the boot order section, sometimes the DVD is listed, sometimes not.

  In both cases, the machine starts with Windows 8 straightly, does not allow me to boot from the DVD.
  The strange thing is that I was able to start on the same DVD in the first place.

  What can I do to start from the DVD?

  At first, I must say that I n t understand why you didn't create recovery media before you changed something. Using preinstalled Toshiba recovery media creator you can create USB recovery and the whole situation would be not so complicated. This recovery image is activated but now if you install own OS version you will not be able to use the product key you got with your laptop.

  Anyway, now proceed to a complete stop Win8 and after having this beginning for laptop and use F12 to get into the boot menu. Of course your external DVD must be connected before starting your laptop. It may be that external drive is allowed on the like on my U940 USB boot option.

• Qosmio F60 - 14K - can't boot from SSD drive

  Hello

  Im trying to install a new SSD, but can't, because I can't boot from SSD disk, "Insert a system startup disk" works great as a USB key, even installed Windows 7 top and tried to boot from it, but with a bit of luck.

  I have not tried to switch between IDE/AHCI, but that, because I don't have this option in BIOS. I think I've tried everything I can test, all the tips/help would be much appreciated!

  And so the part of the BIOS by joke to call bios all you can change the settings of the clock and the bootorder more or less!
  Anywhy for more options?

  THX

  Henrik

  Hey Buddy,

  I'm a little confused about your ad m... You wrote that you have installed Windows 7 on it, but you can t boot?
  You get an error message during installation or what exactly is going on?

  Have you ever tried to restore the factory settings of the recovery on new SSD disk?

  Hmm I put t know what BIOS options you want but I think Qosmio F60 BIOS has enough options.
  Normally with the BIOS default settings everything works fine.

• System crash can not boot from CD/DVD-rom

  Tried to do a restore of widows to correct this problem with CD / DVD rom instead of fix player it now only will start and say 'services starting configuration' and then it will pop a windows 'X' in red saying install Windows - Windows could not complete installation. To install Windows on this computer, run the Setup again. I restart and it keeps reading more and more I bought acer accessories Acer store system recovery discs... but they are unusable because can't boot from the drive to cd/dvd rom please help thank you very much.

  http://www.YouTube.com/watch?v=H2xoMEPfiPQ&feature=player_embedded

• Satellite T230-12V - can't boot from USB

  Hello

  I have a Satellite T230-12v and I decided to change the hard drive for a faster SSD.

  The problem is that I can't just boot from a USB pen to install windows 7.
  The pen works fine.
  The SSD is properly found in BIOS.
  The pen is in the boot options.
  Seems that the BIOS is always keep me to start appropriate.

  I have succecefully started a prompt back from the pen of USB, but not the Original Windows 7 I have here.
  I can't boot from dvd because the laptop is not a.

  Can someone point me in the right direction?

  The original HARD drive is not an option, I don't have it anymore.

  Please advice.
  Thank you

  Miguel Pereira

  When you start your Satellite F12 press to enter the boot menu.
  USB option is listed here? Have you tried this option?

• Why I can't boot from a USB?

  Hello

  Why I can't boot from a USB?   I'm looking to replace a failed hard drive in a Mac Mini 2010. I replaced the hard drive without difficulty.

  I have a USB flash drive from known good 10.10.5 with an Installer (tested) well known about it.   I press the power switch, as soon as the startup chime plays, I press the Option (Alt) key.

  One of the two following situations occurs. Sometimes, I have a small screen asking me to enter my password Wi - Fi. I get my password and nothing else happens. Sometimes, I get a flashing "?" on a file folder.  In my view, this indicates that the computer cannot find a bootable disc. I've tried resetting the PRAM, but I do not have the sound of the double ring that I was expecting.

  Once a Mac is longer than 4 years, his PRAM Battery should replace before resetting the PRAM actually works.

  Is this USB Flash drive "slipstreamed.  It works on any other older than 10.10.5 Mac?

  What is a copy from another Mac or Mac Mini itself 10.10.5 clone?

  Plug you directly into the USB port of the Mac Mini, or using a hub which is powered wall?

• Qosmio F30-140 - can't boot from DVD player

  Dear,

  I faced the problem of DVD player, I can't boot from it... in fact, he didn't see and CD or DVD when I insert it...
  So how can start from reinstalling windows? Or how can I use external USB DVD to boot from it?

  I F30 - 140, with BIOS updated...

  Please help neeeeeeed...

  Hello

  It seems that the CD/DVD drive has developed a hardware problem.
  Normally you should be able to boor to ODD in pressing the C key immediately after the laptop has been powered.
  Alternatively, you can press F12 at the beginning. This would allow the start on-screen menu.
  Here you can choose ODD as a source of start-up

  If this will not work, then the STRANGE might be vice.

  PS: I doubt that the BIOS supports CD/DVD USB drive startup...

• I can't boot from HARD drive or CD/DVD - drive Satellite C

  I want to recover my laptop & I need to boot from the CD-ROM.
  I pressed F12 first time & boot from the cd, but I discovered that I put another cd just when I rebooted (rightly) I couldn't boot from the cd or hard drive.

  When I connect to the hard drive in the bios was detected but not available in the boot priority menu. Just the network card was there & now I can't boot from smoker hard drive cd/dvd. BIOS version is 1.30

  PLEASE HELP ME

  > When I connect bios hard drive has been detected but not available in the boot priority menu. Just the network card was there & now I can't boot from smoker hard drive cd/dvd.

  This means that the HARD drive or CD/DVD drive appears in the BIOS boot option?
  Strange, what model of laptop do you have?
  Have you tried default BIOS?
  Otherwise this (press F9 and save the changes to the BIOS)

• Can't boot from USB/dvd drive on Satellite Pro M10

  Hello

  the broken internal dvd drive, an external USB disk is used. Now I need to reinstall windows on a new hard drive. How can I boot from the external hard drive? (I don't have a floppy drive, but I can't find the right drivers)

  Thank you

  Luke

  Hello

  Don t you need all the drivers for this key USB — because the USB disk is a device integrated on your computer. This means that whenever you connect the diskette drive to your machine, the computer establishes that diskette as a cable internal disk and this is the reason why you won´t need all the drivers.

  It s already installed when you plug it in.

  See you soon

• Tecra M2: Can I boot from USB/Firewire-drive external HARD?

  Hi all

  How can I boot from an external USB drive?
  The Bios 1.20, 15/03/2004 does not seem to support this on my Tecra M2.

  I have a Maxtor 300Gig external HARD drive that can be connected via Firewire or USB. Usually, I use a PCMCIA card Firewire to connect the HARD drive, which has 3 partitions.

  It would be also possible for a start-up by PCMCIA Firewire?

  Thanks in advance.

  Lembong

  Hello

  As far as I know it of not possible to boot from a USB HDD. I know that in some cases it of possible to start compatible USB FDD drives and CD/DVD but the HARD drive note.
  This theme has been removed from the service a lot of time here in the forum.

  Please check this announcement on the other:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4534&MessageID=14824#14824

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8963&MessageID=31325#31325

  Concerning

• Satellite 5205-s705: How can I boot from the CD/DVD drive

  I can't run Setup from my cd/dvd rom, there is no such option in the BIOS Setup. How can I boot from the cD or DVD?
  Please, help me!

  Hello

  You are not able to boot from the CD/DVD drive?
  If you are unable to change the boot order in the BIOS, I would advise you by pressing the F12 key immediately after starting the laptop.
  A start menu should appear, then you should be able to choose the reader of CD/DVD (ODD).

  You can also try clicking on the C instead of the F12 button. The C button the STRANGE start.

  Check this back and forth!

  Good luck

• Can't boot from USB or CD/DVD to boot.

  I'm trying to install a new OS from a bootable DVD that I created. However, my T530 leader not from the DVD. I checked the boot order in the BIOS settings and even explicitly tried to force at the start of my DVD - ROM Sina the F12 boot menu. I was able to boot from this DVD on my other computer.

  Any way to diagnose whether my DVD-ROM is defective, or is there maybe some BIOS setting to fix this? I am able to read the disc in Windows, just can not boot from it. The laptop is brand new, just opened it today, so I don't know why something so simple that it would just work.

  You must disable startup secure, then tilt the machine mode Legacy BIOS UEFI.

• Can't boot from USB on laptop Acer NC-V5-571. another boot enabled is bios and I tried option in W8

  Can't boot from USB on laptop Acer NC-V5-571. another boot enabled is bios, but and I tried to boot from usb DVD etc. (starting from things that works on other PCs. I've set USB and DVD as a priority higher from startup in the BIOS. I get the alternative start menu, choose DVD or USB, but it starts just Windows 8.

  I tried to boot from an external device in settings PC - general settings in the charming bar, but it starts off directly with Windows 8 too.  the DVD plays fine films, and if I plug the boot device dvd W8 sees them and their content because I expect too much.

  Any ideas on how to boot from another device.  I would like to take at least a decent backup using Acronis.

  Thanks in advance for any help

  Ted

  Boot from an additional media under Windows 8, you will ensure that you have either disabled Secure Boot or changed to UEFI in the traditional mode.  The following articles describe how to do this.

  Passing UEFI BIOS mode to legacy

  How to enable or disable secure boot