Can't connect to Internet with the Satellite A100-234

Hello

I have the Satellite A 100-234 but it doesn t work with internet. I put t know what to do. I formatted the computer two times. It's Windows XP by the way and I have LAN DSL connections so I need your help. Pease, what can I do with it?

I have another computer. It's by Satellite A 100 (VISTA), but his work which is average I put t have a problem with my Cannon.
I hope you can help me guys. Thank you!

How did you install the OS on this laptop?
Have you used the Toshiba Recovery CD?

If you have not used the Toshiba Recovery CD so are you sure that you have installed all the drivers necessary?

The network adapter has been properly recognized in Device Manager?

I would appreciate your comments

Tags: Toshiba

Similar Questions

  • For Portege 3490 AC adapter does not work with the Satellite A100-159

    I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

    Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

    Thanks in advance!

    Hello

    I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
    I think that the card for Portege 3490 adapter is not compatible with Satellite A100

    That the two car/truck/Air 120W laptop charger must be compatible:
    PX1237E-1NPO
    PX1235E-1NPO

  • Blue screen with DVB - T USB TV tuner comes with the Satellite A100-165

    Hi all

    I have the Satellite A100-165 with PX1211E - 1TVD USB DVB - T TV tuner (TV savvy). I think the installation is OK because I can watch TV on my PC!

    But occasionally PC reboot with blue screen! :-((Je pense qu'il lorsque le niveau dele de signal TV est inférieur)
    I update the driver warned with the version I found on the Web from Toshiba site: savvytv-udvbtt - 10180629.zip
    But it's always the same!
    You have an idea about this problem?
    I can agree to have a bad display when the signal quality is lower, but it is very annoying to often have a blue screen and PC reboot!

    Thank you in advance on your help
    Best regards

    Hello

    I think that this can be corrected with the latest display driver. Please visit the Toshiba download page and install it.

    If the problem is fixed, please write again.

  • Nokia PC Suite does not work on the Satellite A100-234

    I installed the Nokia PC Suite in my laptop (Satellite A100-234) Unfortunately his does not work. The same cable and Mobile is to connect with other computers.

    Please send your valuable suggestions.

    Hello

    Could you please be more specific?
    Did you get the error messages or something else?

    Maybe something is wrong during the installation procedure
    So I recommend removing this Nokia program and try to install it again.

    In addition, I would recommend checking the PC Suite FAQ on the website

  • can not connect to internet with Quest DSL. Quest DSL support said that the NETWORK adapter is missing

    Original title: can not connect to the internet on a desktop computer Windows XP Prof

    I try to use your older desktop with Windows XP Prof  I use Quest with an ADSL connection and that you have a wireless connection to a laptop.  The office is not wireless. I connected the cable earthnet and quest tell me that I don't have "NIC" on my device manager.  Anyone know how I can receive and install on a computer without internet connection?  Thank you

    L E K, I'm sorry, but I don't know the answers to the other questions. After you enable the NIC, can you check your service manual for an explanation of the other choices? Maybe someone else can answer these questions. Liz.

  • WIFI connection lost with the Satellite A100-407

    Hello!
    I'm having a nightmare and would appreciate help!
    I have a laptop Toshiba Satellite A100-407, and I've been able to connect to internet via WIFI, however, in the last two weeks, he has ceased to operate.

    When I press Fn F8 it says my WIFI is off, but I don't know how this happened, nor I know how to reactivate it!

    To make matters worse my laptop is in German, and my grip on the German language is not that great at the moment, so if someone can help reactivate me my WLAN with indications of how do (IE. Go to the start bar, up 3, click on, cross 2 etc etc) I would be very grateful

    I'm sick of sitting on the ground to go online!

    Please check if the wireless network adapter is correctly enabled. Check first small WLAN switch if I remember well he must be placed on the right side of the laptop. When the WLAN led is activated, use the key combination FN + F8 to activate the WLAN option.

  • BlackBerry smartphones, I can't connect to Internet with WIFI

    Hello!

    First of all, sorry for my so bad English but I am French ;-)

    I'm so desperate!

    I have a Blackberry Curve 8520. I bought it in July. It worked very well, but since 3 months ago, I can't connect the BB Internet (with WiFi or WAP).

    I tried a lot of Wi - Fi, I tried all the options and now I'm so desperate... Nothing works for me.

    Can someone help me please?

    How do you see that you are not connected...?

    Do you have a data Plan on your mobile account valid BlackBerry?

    Or are you ONLY using WiFi?

    Open your browser > Menu key > Options > Explorer and a game the browser to HotSpot and save.

    Now, go back to the browser and IF you are connected to a WiFi router, your browser will only work.

  • How can I connect Epson R1800 with the new iMac?

    Older to make sure printer, but it is good quality and I have a lot of ink and the large photo paper I want to use up. The printer is connected to my iMac plus old (2009) with the cable provided with the printer and an ethernet (Sonnet simply fast) adapter. It seems that the new iMac is a 10/100/1000BASE-T Gigabit Ethernet (RJ-45 connector). Although my Sonnet connector seems to fit in the port, I can't get the computer to recognize that there is a connected printer. Until I can do that, it seems that I can't download the printer driver and everything what I need Epson. (Old iMac died, failed to retrieve the latest driver from there).

    So do I need a different Ethernet adapter? Alternatively, I have USB ports available, how to connect to the printer with a USB connection?

    This printer has a USB port so just connect with a USB cable to the USB port on the iMac.  Download and install drivers from here: printer drivers Epson v3.2 for OS X.

    After installing drivers go to Scanners & printers/system to complete installation.

    Printer is supported you in accordance with this Apple document: printer and scanner software available for download for your Mac - Apple Support

  • I can't connect to internet with my counter top.

    My Desk top is impossible to connect to the internet via broadband .or as my laptop connect error instantly.the he shows is 797 who says "your computer seems to be configured correctly, but the device or resource (Web Proxy) is not responding. I tried all the shoots badly but stil no connection.

    PLSE help my out.

    You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

    See the communication from this "criticism" - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

    I had to run the McAfee removal of Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  • Problems starting with the Satellite A100-662

    Hello

    I appeal to your jurisdiction after a first contact with the Toshiba support on the phone.
    My problem is the following: your computer Satellite A100-662 begins at random, sometimes it starts the first time, and other times it starts only partially sighted power and ignition in market, drive hard s ' lighter than 1 second, the fan runs but the screen remains black.
    To start, I tried several things, I had read on the Internet: removed / delivered the battery; power supply only. removed / delivered the same RAM and hard drive.
    The Toshiba support me make an initialization of food and a BIOS upgrade. I also set the fan but no improvement!
    Because I noticed something by chance: the computer does not start, I tapped on the lower right corner of the computer, and it started but not on the screen. I turned off the computer, and then I'm turned again... He has started!
    What do you think?

    Thank you.

    Hey Buddy,

    first of all: THIS IS a USER FORUM

    That means, Toshiba bed tie this messages or give any kind of support. So, please Don t think that one of Toshiba will call you the next day and give you press your problem. Be prepared to discuss with other users to solve your problem and get some knowledge from other users here autour.

    Regarding your problem:

    I think you have some hardware problem that must be fixed by a partner certified. I guess that an electronic part of the motherboard of your computer does not work correctly and from causes of this boot.

    In your case, I would follow this [LINK: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871], find the nearest authorized service partner in your country and ask them a health check of material.

    That's all, good luck...

    Welcome them

  • Several problems with the Satellite A100-569

    Hello comrades toshers :)

    I had a portable 569 a100 in one last catalog can, last month he had to go off for repairs as the continuous screen empty and had to use the power button to shut it down and reboot again, also questions of excessive paging as well as my computer screen with a kind of mini earthquake... then it is gone and back a week and I these problems are still produce , I understand they have installed a new hard drive and a printed circuit board.

    I also noticed that I can't get the toshiba updates more about expansion memory... this laptop is not yet one year old so would appreciate any help this forum may be able to give me.

    I would sound Toshiba first thing tomorrow on the laptop being faulty, also the ease of online security does not recognize my serial number? very strange.

    long live the people

    Hello

    Obviously your laptop, one of the first models comes with the Vista operating system. To be honest, I agree with you on the RAM. 512 MB is certainly not enough. 1 GB is OK, but for me not enough. I recommend you to upgrade the RAM with 2 x 1 GB module. With 2 GB will be the laptop works well.

    The compatible RAM 1 GB module has PA3411U-2M1G part number. Use this number in Google and you'll find enough shops where you can order online.

    Good bye

  • What RAM modules are compatible with the Satellite A100-590?

    Hello

    I plan to upgrade the memory of my A100-590. At present, there are 2 x 512 Mo of RAM DDR2-533 Samsung inside. The motherboard supports PC2-4200 and PC2-5300.

    If I want to put 2 x 1024 MB DDR2-667. Now, my question is, RAM from other manufacturers such as Corsair, Kingston etc is also compatible with the jury?
    Thanks in advance for your answers!

    GMC

    they * SHOULD * be compatible with this machine, but I won´t dare to say they really are.

    Then it s even better to use the original modules because you can be sure that they are 1000% compatible with your laptop.

    Welcome them

  • Can't connect to internet unless the computer is in safe mode with networking

    Please, let me apologize first.  This is my first time using this forum and I was not aware of how to create a new thread.  Thank you Steve for helping with this.  Here's my question below:

    I have a Desktop Window Vista Home Basic.  I have great internet connection. I can surf the web in SafeMode with network.  However, when I try to access internet in normal mode, I get an error message: cannot display the Page.  When I click on the link to problem diagnose it indicates that the computer detects a connection from home.knology.net, however, there may be a remote firewall blocking the connection.  Firewall systems only 2 that I know are windows and MacAfee and I disabled both of them.  I contacted the ISP and they state it's the computer.  I just bought the computer on 07-02-08. Any help in this matter would be greatly appreciated.

    Thank you

    Bridgett


  • Qosmio F30: Can not connect to internet with WiFi safely

    I recently purchaced a Toshiba Qosmio F30 laptop and have spent the better part of two days trying to connect to wireless internet. After constantly call Wanadoo (my provider) and accusing them for all this, I thought that the laptop itself is at fault.

    What happens is when I try to enter my network key (WEP), default is a different key that I can't see that it's all in the points! This continues to be and im am totally unable to enter my network key. Until it is I turn off security on my livebox thingy and connect unsecurely and as I live in close proximity apartments, other people can and probably will connect to my internet, and I am also told that makes me more at risk of viruses and other.

    I apologize for my lack of technical jargon, and that I can not give a more descriptive... uh... description, but I'm just a beginner and not the most in computer science.

    Any help would be appreciated more!... Why is nothing simpler!

    Hi Luke,.
    Have you tried WAP (shared key) instead of WEP.
    In this way, you will need to make your own key instead of having the it generated by the router.
    It is also safer.

    To do this, you must enter the settings of your router (usually http://192.168.1.1 or http://192.168.0.1), enter the password provided by Wanadoo, then click Security. Change the setting WEP WAP (or shared key) and enter a 10digit password then you will need to enter it again when your computer tries to connect to the router again.

    It is best to use a wired connection to change settings, then disconnect the cable and wireless.
    If you notice that you are connected wireless to the router, and your internet connection is dead, temporarily disable the LAN (reactivate when you are satisfied with your connection works). This would happen if your computer includes your wireless network connection to other computers and the wired connection like you internet connection (even if there is no wire connected).

    It is also important to change the administrator name and password to access your router (this would prevent your neighbors children playing to change your settings).
    Let me know if you have more problems.

  • Can not connect to internet with Internet Explorer, following a recent Windows Update

    After installing the recent update of Windows, I was not able to connect to the internet without making a "diagnose and repair" Network Sharing Center. Someone had a problem with that in the last two weeks or more? I'm running a Windows Vista Home Edition with IE9.

    Hello
     
    (1) who was the last update installed on your computer?
    (2) what exactly happens when you try to access the internet?
    (3) you get an error message?
    (4) if so, what is the complete\exact error message you get?
    (5) is the update installed, or it is not?
    (6) what is the brand and model of the computer you're using?
     
    See the methods mentioned below and check if that helps.
    Method 1:
     
    Method 2:
    Try disabling the security software and firewall when running Windows Update.
     Note: If you temporarily disable or uninstall all security software for troubleshooting so remember to allow him, after the resolution of the problems to end because your computer will be at risk.
    Disable the anti-virus software
    Enable or disable Windows Firewall
    Method 3:
    Try the following article below to resolve network connectivity problems in Internet Explorer.
    http://support.Microsoft.com/kb/936211
     
    Method 4:
    Uninstall and reinstall the wireless card driver.

    Step 1: Download driver network card on the manufacturer's website.

    Step 2: Uninstall the network adapter driver and restart the computer. Let Windows install the generic drivers and then see if it helps you to solve the problem.

    A. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
    B. Si you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    C. find the device network according to the network card option, right-click on it and select Uninstall.
    D. restart the computer.

     
    Step 3: Install the network adapter driver and check.
     
    Hope this information helps.

Maybe you are looking for

  • Satellite on Mini L9W - B - the Tablet battery is empty

    I have my mini click for a day and my Tablet battery is empty, while the keyborddock battery is always 100%.Click mini says I need to load. Why can I not use the keyboarddock battery?

  • Modbus series write in a single register

    Hi guys,.IM new to labview (started back a week) and im trying to create a module VI (Protocol Modbus) for writing and receiving a single registry.    I worked on c# and here is the application (Modbus c# .png) that im trying to implement in Labview.

  • AirPrint to 6700

    I was printing fine from my ipad for the 6700. The only change is a new cartrage of ink and now my ipad cannot find the airprint printer but watch going on all of the installation program.

  • DeskJet F4140: Deskjet F4140 stopped working after paper jam

    I had a paper jam. Folowwing HP statement, I removed the back and get rid of the jam. New, everything is clear. The printer lights up as he wants to work, but will not go through the print operation. Thank you

  • Insert an Update statement in a Trigger

    I'm new to APEX and I'm trying to determine the best place to put an update for an audit table.This is the trigger that I work with: create or replace trigger "LEASES_T1" BEFORE insert or update or delete on "LEASES" for each row begin     if inserti