Can't connect to VMware View Administrator 4.5

Similar Questions

• T5520 HP with Windows CE 5.0 can not connect to VMware View Portal

  Hello people:

  I tried the VMware View 3 solution in a test environment, I have already tested with my laptop configuration

  and when I decided to start trying with a thin client questions start

  First of all, I look in the compatibility guide for a customer support light HP and I got the HP T5520 with a Windows CE 5.0 operating system.

  and when I try to log in to the portal to view VMware via http:// < Server ip & gt; I got an error indicating that the operating system is not compatible wich I do not understand because the compatibility guide says it's compatible

  After that I tried to do a manual install through execution of the installer and the system there is no enough space to install which is meaningless too.

  I'll apreciate any help because I can't understand how this model may appear as compatible and give me this questions to test my VMware View solution

  Thank you

  It was indeed option (2), it's fairly well hidden on the HP website, but you need to download their "VDM Broker Add-On for Microsoft Windows CE": http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=500832&prodNameId=500833&swEnvOID=2051&swLang=13&mode=2&taskId=135&swItem=vc-67534-1

  It can be found in the section "Software - System Management" of their support for the HP T5520 download page. Thanks to wponder and the team of the HP Alliance for pointing me to the finger in the right place.

• 1. can't connect to VMWare Server when no network 2. Comments or lost when lost network connections

  Hello

  I have two guests of computer virtual on my laptop.

  1. I can't connect to VMWare Server when there is no network.

  This means that I can not launch the guests when I'm at home (with no network) or on the road.

  2. the connections are lost when lost network.

  As a corollary to article 1 above, if I am connected to the work, and that the network is lost, my connections are lost for the guests.

  How to configure VMWare so that this doesn't happen, please?  (I inherited the setup of a colleague who has left, so I don't know how it has been implemented).

  'About' gives:

  VMware Infrastructure Web Access

  Version 2.0.0

  Generation 116487

  VMware Server

  Version 2.0.0

  Build 116503

  T.I.A.

  ALF

  Hello

  If you want to connect, try: https://127.0.0.1: 8333 or https://localhost:8333.

  BTW. You can upgrade your VMware Server to the latest version, as I see you are using the beta version.

  J.

  You can read the document undermine , Impossible to open the VMWare - Server and Remote Console-

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  Post edited by: janlib

• VMware View 4 - looking for a version of Linux OS that can connect to VMware View

  I would try a Linux operating system that can connect to the VMware View 4 environment that configure. Well, now I want to load a Linix OS on a PC and have it connect to view desktop computers work all Windows PC. Is this possible? If so, what flavor of Linux do I need?

  Please post links to downloads of versions of Linux.

  Thank you

  All Linux distributions are free...

  I'm pretty confident that it works with CentOS, although I have not tried myself as I executed him the VMWare View Open Client on Mac.

  Twitter: thevirtualguy

• Completely remove sdconf.rec connection server VMware view Horizon 6

  Greetings,

  I want to completely remove the sdconf.rec file downloaded from my connection to the server VMWare View Horizon 6.0.1. In previous versions, it was that I had to delete the Sdconf.Rec of C:\Windows\System32 and set the attribute to EAP-SecureIDConf under CN = < servername >, OU = server, OU = propriΘtΘs, DC = vdi, DC = VMWare, DC = int '0' but this attribute does not exist in version 6!

  Just deleting the Sdconf.REC file does not work, after doing that (even after a reboot) it always says "a Sdconf.REC file has been downloaded" when I check the settings of the connection to the server.

  Does anyone know how to delete this file in version 6? I'm this close just removed the server connection and security together and do a complete reinstall.

  Thanks in advance!

  Bram

  bverm wrote:

  Haha, Yes, it seems I was typing the variable wrong, changing the attribute now works, but I still see "an sdconf.rec file is already downloaded" even after change to the attribute and remove the sdconf.rec file in system32, even after a reboot of the connection to the server.

  This should be OK. What you did is invalidated the sdconf.rec file. It probably will always exist, but watch to see if it has been invalidated. that is, it should now be much smaller than your original and so not usable, which I think is what you wanted to achieve.

  If you want to just disable the RSA SecurID authentication, which can be made in view administrator.

  Please confirm.

  Mark

• Deleting events in VMware View administrator

  Hello

  How can I remove events in the administrator of the display (here I have the version 4.6)?

  Due to a configuration problem now I have the same error over 3,000 events, and I'd be happy if I can delete them.

  Kind regards

  André

  You might be able to delete directly from SQL, using the events and event_data tables in the case of database.   I found th informaton below on page 10 of the guide to integration of VMware View.  I want to backup my database of events before performing any manipulation.

  VMware View provides details on all tables of database events. After a certain period of time elapsed

  Since writing to event record, VMware View deletes the record of the event, and event_data tables. You can

  Administrator display allows you to configure the period for which the database maintains a register to the event and

  tables of event_data. See the

  Installation of VMware View document for more information.

• Connections external vmware view 4.5

  External connections disconnect after 10-15 seconds.

  I have a server configuration of security for users of the internet.

  I checked the ports 80 and 443 are open on the firewall.

  I can actually connect using pcoip customer, select the pool that I want to connect.

  I hit connect, and looks like it will work and see a black box, then it disconnects in the error box: "the connection to the remote computer is over."

  Everything works internally, I can connect via the server security or the connection to the server without any problem.

  I read the other post of the users who have had the same problem, and one of the solutions is to direct connections not, but I can't this setting around vmware view 4.5.

  See 4.5 supports the protocols RDP and PCOIP for accessing jobs. If you use PCOIP, then the customer need to establish a VPN before you start the client. RDP would be able to support the client connection to the WWW through the Security server.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points.

• VMware view Administrator console... increase timeout

  Hi guys

  just migrated to view 4.5 and everything was fine...

  Is it possible to increase the limit of the Vmware view admin console timeout? I would have the dashboard always on my 2nd screen without going all day logon due to delays...

  Thanks

  Very well, you can do this by following these steps:

  Go to: Display Configuration > global settings > check Activate the automatic updates.

  You'll notice that the heading aid next to him said: "the idle session timeouts not happen when automatic updates are enabled, causing the Administrator display to remain active until the browser is closed or an explicit logout is performed."

  This will allow you to follow the Administrator display without waiting times. (And you don't forget to lock your workstation when you leave your desk anyway, so you should be fine. )

• can not connect to vmware server 2, just installed on vista

  so I just install VMware server 2 on professional vista, and I can't connect.

  the installation goes very well, no errors, and I reinstalled twice now and still no success at connect.

  I click on Vmware server home page, it does appear in firefox, I use my login and my password that I use to connect on my computer and I just get:

  "The login failed due to a bad username or password".

  help, please, thank you.

  Hello

  Try activation of your administrator account and setting a password for it.  Then use these credentials to connect.  Once connected, you can set other local accounts to use.  You can then disable the administrator account.

  Try the above, I didn't have to do is when I installed Windows 7, but I remember having to do so in the past on vista.

• A local user account can be used with VMware View?

  I have a bit of a unique situation.  I virtualized PC (off the field) which is basically a controller or a big machine.  To run the software from the vendor, the local user account is required.

  Unfortunately, it doesn't allow a local user account to add to the display manager.  Am I missing something, or is it just not possible?

  Thank you!

  As said Mark, you can disable Single Sign-on on the desktop so that after you authenticate to view (it must be a domain user) you can then enter any identifying information that you have on the desktop itself.

  Policy details are in 5.1 Administrator's Guide Page 163 views and politics is titled AllowSingleSignon:

  http://pubs.VMware.com/view-51/topic/com.VMware.ICbase/PDF/view-51-administration.PDF

  You will be able also a step further. After that you disabled SSO on the desktop, you can configure kiosk in view mode that the client used to connect to this desktop computer (if you are using only a single customer) would link up to this office automatically and then the user would simply see the Windows login prompt and be able to authenticate locally.

• Automatic connection to VMware View

  Is it possible to have the customer view automatically connect a user without the user by clicking on the pool, to which they are assigned? I wish I had a few booths set up to log on automatically.

  Try 115 of the http://www.vmware.com/pdf/view401_admin_guide.pdf, the Administrator's guide.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Unable to connect to VMWare View Manager

  After installing VMWare Server connection View, it should be possible to connect with domain controller connect credentials to https://connectserverip/admin. Unfortunately, I get the following error message by:

  

  View connection server is part of a domain and not domain controller. If I use a name of user and password invalid, not available on the domain controller, give notice page perfect: "an incorrect user name or password was entered.".

  Everything works on 1 Server ESXi with only 4 virtual machines, 1) Linux, 2) vCenter (w2003), 3) viewController (w2003), 4) viewConnectionServer (w2003). For installation, I used an evaluation license and the quick start guide and administration.

  Have you installed the servers from scratch or you clone them?

  André

• I can't connect to my account administrator error: customer service group policy has no logon. access denied

  Original title: i cannot connect to my administrator account

  Hello

  When I try to connect to the administrator account I have this message "group tht the login failure policy customer service. Access denied"what can I do pls

  Hello

  (1) remember you to make changes prior to this problem?

  (2) work on a domain network?

  Step 1: Start the computer in safe mode. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the advanced startup options select Safe Mode

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  
  Step 2: check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Can not connect to VMware 5.0

  Nice day

  I have a problem that my admin account doesn't work any more (invalid username or password) of vSphere and my secondary account said "I have no security rights.

  I have 5 virtual machines configured on this box which is a Dell R710.  I can still access the ROOT of the console with the root login.

  It is ESXi 5.0.0 B 469512 is the trial version, all VMS are also closed today.  It was installed the first week of October on this box, so I know that it is within 60 days unless that happens the day where I downloaded it that would be beyond 60 days.

  In fact, I tried to access the box to activate VMware to the full version when I came across this problem.  I know that the admin account was the same as all my accounts on the network admin.

  Anyway if it has only an activation code so if someone could direct me to the right way to do this I would appreciate it and the ESXi if toast is there a way to get the VM on the disks before you reinstall ESXi?

  Thank you

  Dave

  Welcome to the community - if you can access the console with the root account, you should also be able to use the root to connect with the vSphere client - it is through the vsphere client that you will be able to add your license

• Can't connect to apex as administrator after apparent successful installation

  I am unable to connect to the apex as administrator after apparent successful installation.
  
  I have a database of existing Oracle 11.2.0.1.0 with text Oracle running on Windows 7 Professional with several hundreds of gigabytes of free disk space available. I did everything as a user operating system with administrator privileges. I have downloaded the latest version of apex 4.0.2 for all languages, decompressed the downloaded zip file, extract all the files in a directory of the apex. I changed the working directory to the apex and started sql *, sys connected sysdba, ran apexins.sql installation and configuration of apexconf.sql, apex_epg_config.sql, apexchpwd.sql to change the password admin and apxldimg.sql to copy the images and exec dbms_xdb.sethttpport (8080), unblocked accounts and connect granted privileges.
  
  The Setup log did not show any errors including:
  
  "Thank you for the installation of Oracle Application Express.
  
  Oracle Application Express is installed in the APEX_040000 schema.
  
  The structure of the link to the Application Express administration services is the following:
  http://host/pls/Apex/apex_admin (Oracle HTTP Server with mod_plsql)
  http://host/Apex/apex_admin (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
  
  The structure of the binding to the Application Express development interface is:
  http://host/pls/apex (Oracle HTTP Server with mod_plsql)
  http://host/apex (Oracle XML DB HTTP listener with the embedded PL/SQL gateway)
  
  JOB_QUEUE_PROCESSES: 1000 "
  
  When I use a browser, Internet Explorer 8.0 or Firefox 3.6.12 and navigate to http://localhost: 8080/apex/apex_admin I get a screen that says:
  
  "Enter the credentials of the internal administration Express Application"
  
  and boxes for a user name and password. When I go to admin the $admin_password I selected, and then click connection, nothing happens. I don't get connected. I don't get an error message. It doesn't show signs of what anyone running. He's right there. I don't receive any message from Windows or Norton 360 indicating that a pop-up window has been blocked or something. I checked that the services are running and also tried to turn off the computer and turn it back on (cold start), but still couldn't connect.
  
  I'm a former developer, not a s/n, so if there is anything else that I should do or check or provide, then please let me know. I have provided a copy and pasting of everything I could think of below. Oddly enough I don't see an admin user.
  

  SQL> select * from v$version
    2  /
  
  BANNER                                                                          
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production    
  PL/SQL Release 11.2.0.1.0 - Production                                          
  CORE     11.2.0.1.0     Production                                                      
  TNS for 64-bit Windows: Version 11.2.0.1.0 - Production                         
  NLSRTL Version 11.2.0.1.0 - Production                                          
  
  SQL> select status from dba_registry where comp_id = 'APEX'
    2  /
  
  STATUS                                                                          
  --------------------------------------------                                    
  VALID                                                                           
  
  SQL> select username, account_status
    2  from   dba_users
    3  where  username = 'ANONYMOUS'
    4  or     username like 'APEX%'
    5  or     upper (username) = 'ADMIN'
    6  order  by username
    7  /
  
  USERNAME                       ACCOUNT_STATUS                                   
  ------------------------------ --------------------------------                 
  ANONYMOUS                      EXPIRED                                          
  APEX_030200                    EXPIRED                                          
  APEX_040000                    OPEN                                             
  APEX_PUBLIC_USER               OPEN                                             
  
  SQL> select dbms_xdb.gethttpport from dual
    2  /
  
  GETHTTPPORT                                                                     
  -----------                                                                     
         8080                                                                     
  
  SQL> select owa_util.get_version from dual
    2  /
  
  GET_VERSION                                                                     
  --------------------------------------------------------------------------------
  10.1.2.0.8                                                                      
  
  SQL> show parameter memory_target
  
  NAME                                 TYPE        VALUE                          
  ------------------------------------ ----------- ------------------------------ 
  memory_target                        big integer 1536M                          
  SQL>

  Hello

  There is no need to uninstall anything.
  From just install the zip file now in c:\temp and run the script to editing image with path c:\temp.

  You should be fine. When you get this working, you can connect to XDB for example by using the FTP client and remove folders of possible backup that image editing script did.
  But those who do no harm and you can leave those.

  First to get Apex working by updating the images once again with script.

  This update of the image do not affect the purpose of database of the schema APEX_040000 so you don't have to uninstall anything.

  Kind regards
  Jari

  Published by: jarola December 6, 2010 12:10

  If the updated image once no help yet. What you have set for the fourth parameter of installation script Apex?
  You must set/i /. In the installation of Apex "Utilities" folder files is reset_image_prefix.sql script to reset the image path.
  You who run and give is as a parameter