T5520 HP with Windows CE 5.0 can not connect to VMware View Portal

Similar Questions

• I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

  I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

  You can repair XP or try the following:
  http://support.Microsoft.com/kb/917964
  http://support.Microsoft.com/kb/307545

  TO

  Re - install http://support.microsoft.com/kb/978788

• After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet.

  Network connection problem

  Hi all

  After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:

  There might be a problem with the driver for the wireless network connection card

  Windows could not automatically bind the pile of IP protocol for the network card.

  There might be a problem with the driver for the connection to the Local network map

  Windows could not automatically bind the Protocol IP on the network card stack.

  Details of detection

  Diagnostic information (network card)

  Network card diagnostics information:

  Network adapter driver to connect to the Local network information:

  Description... Broadcom NetLink (TM) Gigabit Ethernet

  Reference the manufacturer... Broadcom

  Provider of... Broadcom

  Version... 14.0.1.0

  The name of the INF file... C:\Windows\INF\oem5.inf

  Date of the INF file... 14.05.2010 21:21:56

  Name of the section... DEV_KEY2. NTamd64.6.1

  Hardware ID... pci\ven_14e4 & dev_1692

  Instance status indicators... 0x180200a

  Status code from device Menager... 0

  IfType......................... 6

  Physical media type... 14

  Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.

  Any other ideas please. This really seems teribble :(

  Thank you

  Nikola

  Hello

  You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:

  netsh winsock reset
  netsh int ip reset log.txt

  How to run the command prompt as administrator (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon with sprint 4g

  I have a question, I'm trying to connect my phone via bluetooth with my laptop, but I can not connect, I can not find my phone bluetooth device is a photon 4g with sprint, if anyone can help me I appreciate it.

  Check with the manufacturer of your celllphone or Sprint to make sure your phone has this feature, and if so, what is needed to get there.  It should be in the documentation for the phone manufacturer or Sprint web site.

• emachine New (refurbished) supplied with windows 7, but I can not get it started. Have windows xp now.

  He gets from windows 7 but then says pc offf and restart... which does nothing. It ' starts 'windows 7 pc so said but stopped. Iagain. It is new (renovated emachine) I screen flat screen. (I hope that right descrtion.). Don't know how to stop the automatic closing. I need to get windows 7 and my pc to work together. Or return to windows xp? I clearly need help. I've been 'online' for 12 years but I'm 74 and still it is very complicated for me. I use pc for email to kep in contact with the family and to play games. Who is generally not difficult.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  To Acer and emachiens, press and hold ALT + F10 as soon as you see the logo

  eMachines

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=eMachines

  1-866-539-3901

• I just got a computer g60 hp laptop with windows 7 and I can not star wars Knights of the old Republic 2 to work on this, I have tried everything, I saw that you answered someones question similar on this problem, but the answer did not help me

  When I start to play my game, it loads well, and it allows me to start a new game and customize a character and then I press start and it goes through the opening of star wars and then video when that ends, and is about to go to the actual gameplay it stops working, all it say is that the program has stopped working and stops , now as I said this very similar problem replied Web site someoones and you told them update their display driver that I tried and it still doesn't work, my graphics card is a mobile Intel (r) 4 series express chipset family, if this is useful, I also used the xp compatibility mode but that did not work either

  Andrew,
  KotOR II does not have to be compatible with Windows 7.  I suggest contacting the manufacturer of game and see if they have a patch or a patch for this game. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ACS 5.2 synchronization with Windows 2008 AD but can not see groups

  Hi friends,

  Recently, I worked with the CSA (installed on VMWare) 5.2. At first, I was using a Win Server 2003 Enterprise edition AD, and he had no problem with the AD and the authority of CA. Because some of my customers use Win Server 2008 I change the advertising platform for Win Server 2008 Enterprise edition (x 64).

  I didn't really have a great experience with Win server platforms, and for what I've seen, the Services of Win Server 2003 deployment is easier than is the Win Server 2008.

  So, when I used the Win 2003 server, I can not only synchronize the ACS with AD but also use some groups created on the announcement to perform network access authentication. When I try to do the same with Win Server 2008 AD the CSA and the server is synchronized, but when I want to add groups for the purposes of authentication it is zero, absolutely nothing... so I can't do any test.

  Also, I searched for information on the compatibility between the ACS 5.2 and Win Server 2008 platforms, and in the end, the platforms are compatible.

  Any idea?

  Thanks in advance.

  Jose M Cortes:

  Hi Jose,

  Thank you for letting me know, glad your problem is solved now.

  Feel free to ping back in case you need assistance with GBA in the future.

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?

  So I just got my brand new HP ENVY spectrum XT Ultrabook with Windows 7 Home Premium installed. 64 bit. I start it, everything works fine, except that when I connect to my WiFi at home. I tried to connect, entered my password, but it does not connect. Also tried the easy connection on the router. No luck. I checked my old laptop which runs on Windows Vista to see if WiFi worked always, and this is where it gets interesting. I was able to browse the internet and internet worked, but suddenly Windows informed me that "another computer uses the same IP address" and it stops my internet capabilities on my old laptop. I connected my cable ethernet on both computers, and it works for both computers when it is plugged. While that plugged, I discovered that I could create my own IP address, which I did on my old laptop and so far that seems to have solved the problem. However, my DESIRE is always not connecting to WiFi. Any advice?

  Hi ZachRhodes3,

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  5 steps: how to set up your network wireless home

  For reference:

  How can I troubleshoot network card?

  Wireless network card: frequently asked questions

• After changing the administrator password in windows server 2003, I can not connect the next day why?

  After changing the password in windows server 2003, when the new password take effect?

  Hello

  In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• After windows update yesterday I can not connect to internet

  I can't connect to Internet after update last night. This happened last week too. Last week, I disabled the norton firewall and was able to connect. This week it does not work. When you try to connect to the database's data/program it states: could not connect to the database server. Please check that you have a working internet connection and that the application is configured correctly.

  Hello Carise,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem can occur either because of corrupt network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• can not connect to vmware server 2, just installed on vista

  so I just install VMware server 2 on professional vista, and I can't connect.

  the installation goes very well, no errors, and I reinstalled twice now and still no success at connect.

  I click on Vmware server home page, it does appear in firefox, I use my login and my password that I use to connect on my computer and I just get:

  "The login failed due to a bad username or password".

  help, please, thank you.

  Hello

  Try activation of your administrator account and setting a password for it.  Then use these credentials to connect.  Once connected, you can set other local accounts to use.  You can then disable the administrator account.

  Try the above, I didn't have to do is when I installed Windows 7, but I remember having to do so in the past on vista.

• I am infected with 'Windows Police Pro' & I can't connect to the internet to launch the live scan. The malware has disabled regedit, and any other approach, trying to regain control.

  I searched and downloaded every suggestion of recovery I can find on the internet. Nothing worksIdeas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Run the system restore and see if you can return to a time before the infection occurred.

  Follow the steps in the article of bleepingcomputer.com Remove Windows Police Pro (removal Guide) .  If necessary, download the files on another computer and copy them to your.

• Cannot configure the Wi - Fi connection with myRIO. Error message: can not connect. Incorrect credentials.

  Wireless network authentication information in what I typed is correct. I also tried to connect to wifi not school, but that no longer works. Any ideas for a fix?

  Difficulty:

  Create a network using the myRIO and connect on your computer rather than trying to connect to your LAN with the myRIO.

• Can not connect to VMware 5.0

  Nice day

  I have a problem that my admin account doesn't work any more (invalid username or password) of vSphere and my secondary account said "I have no security rights.

  I have 5 virtual machines configured on this box which is a Dell R710.  I can still access the ROOT of the console with the root login.

  It is ESXi 5.0.0 B 469512 is the trial version, all VMS are also closed today.  It was installed the first week of October on this box, so I know that it is within 60 days unless that happens the day where I downloaded it that would be beyond 60 days.

  In fact, I tried to access the box to activate VMware to the full version when I came across this problem.  I know that the admin account was the same as all my accounts on the network admin.

  Anyway if it has only an activation code so if someone could direct me to the right way to do this I would appreciate it and the ESXi if toast is there a way to get the VM on the disks before you reinstall ESXi?

  Thank you

  Dave

  Welcome to the community - if you can access the console with the root account, you should also be able to use the root to connect with the vSphere client - it is through the vsphere client that you will be able to add your license