1. can't connect to VMWare Server when no network 2. Comments or lost when lost network connections

Similar Questions

• Installation of VMWare Server 2 breaks network connections

  I just install VMWare Server 2 on a Dell 1950 with Windows 2008 Enterprise Server.  He must have done something to the network settings because I can not remote on the server more.  Anyone know what happened?  I have Microsoft Virtual Server software installed on the same server.  Which would cause a conflict?

  Any advice would be great.

  Thank you
  Greg

  I had MS Virtual Server installed VMware Server 2, but it was on a Windows 2003 host.

  Server installation adds two virtual networks.  (VMnet1 and VMnet8.)  Try disabling the and see if you can remote into.  Otherwise, if you uninstall the server, are you able to distance in the host again?  (These are the solutions, just in troubleshooting).

• OK I installed VMWare Server 2, how can I connect?

  I downloaded and installed VMWare Server 2

  I have an icon called VMWare Server Home Page

  This IE opens on port 8333 seeking a VMware Infrastructure Web Access user name and password

  Where can I find these identifiers?  Technical support wasn't much help, advising me to register the product online.  When I do this it tells me that it is already registered.

  So, how can I start using VMWare Server?

  I must be being stupid sorry!

  Hello

  If you use windows (I think that you have administrator rights), add the password for your account. Enter your windows login and password to connect to the user Web interface.

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• How can ping virtual machine on VMware Server external network?

  In the Vmware infrastructure products you can can be crazy from the outside through their individual networks connections, which is a good thing... lol

  How this is possible on VMware Server when guests use the VMnet8 network that uses NAT?

  In many scenarios, the use of bypass is prohibited due to the policy defined at the level of the external switch, but it is still necessary for the basic functionality of ping. Otherwise, how they would be able to know if a virtual machine is actually up to who answered the questionnaire on the network without entering actual connections to such hosts?

  You're right - that's how NAT works (whether via a service such as the VMware NAT service software or a hardware router/firewall NAT).  All computers behind the NAT server are hidden from the outside world (unless you map specific ports to the specific IP address of a computer)... they are so NOT to pings from the outside.

• Con ISA Server while Red VMWARE Server 2

  Hola Foro... paso a form el problema as tengo, quiero hacer funcionar an ISA server con UN ADSL (2 while RED, y LAN WAN)

  Esto lo quiero hacer con a HOST VMWARE SERVER Windows 2003 bajo, red HOST tiene el 2 while

  1 LAN (red interna con DHCP)

  1 WAN (ADSL Modem)

  Como puedo hacer para that the WAN solo tome del IP ADSL modem?

  Se you can hacer esto con VMWARE SERVER?

  No tengo good claro todo el tema no redes office, bridge, the host-only, etc. want help me podrá a resolver este problema?

  Desde ago thank su ayuda!

  PD: the idea in a futuro no muy lejano are add mas while al physical RED HOST connect 1 ADSL o mas para enlace an Internet.

  Standards organizations.

  Hola Guson,

  MI primera mid-week're Instalar ESXi (free) donde estas Running Windows 2003 con VMware Server, dado para el tipo tasks than estas queriendo perform lo veo mas robusto y seguro.

  Sober crearias UN vswitch0 donde poner una placa para management ordered ESXi console y lan. In el segundo vswitch colocas segunda placa a modo DMZ.

  Luego creas una vm con back while y colocas una in cada cada vswitch portgroup.

  If going to por the opcion of VMware Server.

  ACA you paso UN link muy bueno para veas rapidamente networking.

  http://www.carbonwind.NET/VMware/VMwareServerNetworkingOptions/VMwareServerNetworkingOptions.htm

  I think the config seria, put both while bridged, en mejor y una conectarla al modem adsl, the other campaign directly has the LAN.

  CREAS una vm, y the POWA of the DMZ the sober colocas vmnic that is located in the DMZ, then the other campaign placed the sober colocas the LAN.

  The Plaça of the DMZ the dejas in DHCP, the Plaça of the LAN IP fija das.

  Should funcionarte ok.

  Saludos

  Diego Quintana

• "" Windows Vista Ultimate 32-bit - VMWare server 2 "will not start.

  I tried several times to get VMWare server v2 to install successfully.

  There is no error during installation.

  However. I don't see any application console in the system tray, I can't access the home page of the server from the links on the start menu, I do not see the mess configuration settings with since I can't access the VMWare server.

  VMWare points than running in my task manager: VMnat, VMnetdhcp, VMWare-authd and VMWare-pass

  Juggling url paths and others told me to a page where I get my name-user/pass (my windows login, yes?). I enter and it evokes this:

  " Web Serviceat VMware Infrastructure" http://localhost:8222 / sdk "does not (Connection Refused). .

  How to "do" something? I understand that they went to a web interface, but I'm unable to access the web interface.

  I'm trying to give as much info as I can, but there is really no other info.

  Wergeld

  Post edited by: sum

  Hello

  VMware Server Web Access (tomcat6) works just as well? (I think - Yes - but I want to be sure)

  Check the host for IPv4 entry file: 127.0.0.1 localhost

  You use the Web user interface as an administrator?

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• VMware-server screen of the console value

  I am running vmware-server on my linux (CentOS) machine so that I can have MS Windows.  The entire Setup is right for me.

  I just upgraded to version 2 which has MS Windows in a special console window.  I would like to than the console to start on the second DISPLAY window (: 0.1) so that I can use Firefox normally on DISPLAY: 0.0.  How can I?

  Vmware-server is overkill for what I'm doing?  VMware player is available for linux?  Should I use Firefox to start?

  I think that its an exaggeration. You probably want to use VMware Workstation to this... it allows you to set the number of monitors used by a virtual machine. Or use VMware Player 2.5... It is available for Linux.

  Edmond

• can not connect to vmware server 2, just installed on vista

  so I just install VMware server 2 on professional vista, and I can't connect.

  the installation goes very well, no errors, and I reinstalled twice now and still no success at connect.

  I click on Vmware server home page, it does appear in firefox, I use my login and my password that I use to connect on my computer and I just get:

  "The login failed due to a bad username or password".

  help, please, thank you.

  Hello

  Try activation of your administrator account and setting a password for it.  Then use these credentials to connect.  Once connected, you can set other local accounts to use.  You can then disable the administrator account.

  Try the above, I didn't have to do is when I installed Windows 7, but I remember having to do so in the past on vista.

• XP, VMware Server 2: Error loading Page - Firefox can't establish a connection to the server < hostname >: 8333

  This seems to be a fairly common problem, or variations of it.  When I reinstall (repair) VMware Server (2.0.1), it corrects the problem.  As soon as I reboot, I get the error once again and can no longer connect via the web access.

  I don't have McAfee SecurityCenter to Comcast, and I'm trying to understand if there is a firewall issue. What makes no sense at all, it is this issue has occurred only recently, and I used VM for several months with several guests and almost no problems (through multiple reboots).

  What are the most common reason for this problem?

  Thank you.

  I had the same problem, started the 'VMware VSS Writer' Service and set it to automatic.

  Works now.

• When I click on a link to seend an email to someone, I get an erro message which indicates that the yahoo mail server can not connect and my messages are not sent.

  Problems sending messages.

  When I click on a link to seend an email to someone, I get an erro message that says that this yahoo mail server can not connect

  and my messages are not sent. I have a total of 9 messages that have been blocked.

  Do I need to have a pop3 address or can you tell me what is happing.

  You must have an account set up under Tools | Accounts | Mail to send from Windows Mail.  If you click on a link, it will not lead you to a webmail interface, but called instead a mail client, such as WinMail.  Around that, the only way is to copy the email address and paste it into a new message you have composed of webmail.

  Steve

• Why the administrator is the only one who can connect to VMware server 2.0.1 GUI?

  I am facing this problem and have been unable to find a solution for this.

  I need to segment users who manages our servers VMware 2.0.1 in ProductionAdmins, DemoServerAdmins, DevAdmins etc etc. VMware server runs on Windows Server 2003 member of a domain (for example, the AD authentication).

  My main problem is that only users who are allowed to log on by using the graphical interface are those who are members of the local Administrators group - and by substituting so completely the VMware Server permission settings. I get a "you do not have the permissions to connect to the server" for all users, except the members of the group mentioned.

  In the VMware Server documentation, I can read that users and groups are managed by the host OS (AD), but is obviously not "the complete truth. I tried to add a user (domain or local user also) to the local 'users', '__vmware__', 'Power Users', etc., etc. no change

  What prevents the user to log on to the server. I even tried to add the user to "Remote desktop users" - which works very well (with the exception of the connection to the console that requires membership of the admin).

  I don't understand. What's wrong???

  Bjoern Dirchsen

  IT Manager

  Kapow Technologies

  Have you used the Administration-> manage roles (WebUI)?

  You set up the authorization for VMS (WebUI)?

  I work in the field and I can set up permission for domain members (not only Local Administrators or domain administrators).

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Connection on a VMware Server 2 on OpenSuSE Linux 10.2 is not possible

  Hello together

  I installed an OpenSuSE 10.2 Server (32 - bit) mode text as system host with VMware Server 2 installed with yast.  I can access it from my Vista PC.

  On https://192.168.0.10:8333 / ui / # I see the login screen. When I try to connect with the root servers and password user, it gives me the message "Login failed due to a bad user name or password."

  If I check the running processes, I am following up running: vmware-watchdog, authdlau-vmware, vmware - pass. So I guess that the server is running properly.

  AppArmour is disabled and on webmin for example the connection is possible with the root user.

  Any help apreciated. Thank you very much.

  Mario

  I came across the same issue on 10.2 when Server 2.0 is out. As there is no solution or a help right now I went back to the server 1.0 x. In the meantime, there is a solution possible, mentioned in the third posting of this thread (editing files of PAM and replacing 'pam_unix.so' by 'pam_unix2.so')

  I try it again once the server will soon be reinstelled with OpenSuse 11.1 (support for 10.2 has finished), so I stay with 1.09 for now and move to Server2.01 after upgrade

• Since the installation of El Capitan, I can't connect to shared on the network computers. I can see them, but when I try to connect it says connection failed. I can connect directly in Parallels using a shortcut.

  I can't connect to shared network computers. Not a problem already before the update to OS X El Capitan. The computers appear in the Finder under heading Shared, but when I try to connect it says connection failed. However, under Parallels Windows 7 I can properly connect via the shortcut or mapped drive. Any suggestions?

  El Capitan is a bit fussy about safety. Try

  Finder > go > connect to server...

  and enter the address of the server explicitly in the dialog box that appears.

  C.

• Error - Server cannot be found. Can't connect to WIFI in Windows XP machine.

  Original title: I can't connect to wifi using my laptop. I can log on when perfectly well using the ethernet adapter and my cable modem.

  I can't connect on wifi with my laptop. "Wireless network connection" reads "connected." Power supply: 'excellent '. When I try to connect to internet, I get the message "Cannot find server" as if there is a problem with my IP address. I can connect to the internet perfectly well when you use the with my cable modem ethernet adapter. Any ideas?

  Hi cmptrken,

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.

  Please post back and we do know.

• I can't connect to the remote desktop through VMWare on my windows vista with IE9.

  I need to set up a remote desktop access in a remote installation. I got an ID and a personal password to access their desktop remotely, but I can't get to the portal clinet vew VMWare server. I am able to set up access on my other computers with windows XP IE8. and Windows 7 IE8, but not windows Vsta IE9. I tried to download enhanceie.com/dl/IE8v.reg but when I click on the icon to access the portal I get a «Cannot find the file specified...» meeage "does anyone have a solution to this problem?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Vista on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro