Can't connect to WIFI on all locations where the WIFI network is available

Similar Questions

• I can´t connect via WIFI.

  I can´t connect via WIFI. My equipment is a Realtek RTL8191SE WLAN 802.11n, is recognized by the computer as work, and the version of the driver is the last update, I found on the web (version 2015.1.427.2010, dated 2010.04.27. What should I do?

  Hi Jeremiah c,.

  ·         What happens when trying to connect via wifi?

  ·         You receive an error message/code?

  ·         Have you made changes on the computer before this problem?

  ·         What version of the operating system is installed on the computer?

  Follow these methods.

  Method 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 3: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4: Follow the steps in the articles provided.

  In the Windows wireless network connection problems

  Wireless network card: frequently asked questions

  Also update the latest drivers for the network card.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• Error - Server cannot be found. Can't connect to WIFI in Windows XP machine.

  Original title: I can't connect to wifi using my laptop. I can log on when perfectly well using the ethernet adapter and my cable modem.

  I can't connect on wifi with my laptop. "Wireless network connection" reads "connected." Power supply: 'excellent '. When I try to connect to internet, I get the message "Cannot find server" as if there is a problem with my IP address. I can connect to the internet perfectly well when you use the with my cable modem ethernet adapter. Any ideas?

  Hi cmptrken,

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.

  Please post back and we do know.

• BlackBerry smartphones, I can't connect to wifi

  I can't connect to wifi

  I m still free wifi struggling its got an arrow can help u connect

• can not connect to my HP Touchsmart. Maybe the wrong password.

  just bought a HP Touchsmart desktop computer. One of my friends came to be implemented and we did the admin username and password. now, I can not connect! I went from values around the thought of my friend may have put numbers in the wrong place and no luck. now, I can't even in the computer. all I see is the login screen. can someone help me please understand where and how I can recover my password?

  Hello

  sandrabermea wrote:

  just bought a HP Touchsmart desktop computer. One of my friends came to be implemented and we did the admin username and password. now, I can not connect! I went from values around the thought of my friend may have put numbers in the wrong place and no luck. now, I can't even in the computer. all I see is the login screen. can someone help me please understand where and how I can recover my password?

  If you have not installed anything, but then it's quite simple. Use the option of reset HP Recovery Managerfactory. That will return that your laptop is purchased condition.

  You can access the recovery at Startup Manager by pressing the F11 key immediately after pressing the power button on your laptop.

  Once you have recovered your laptop be sure to make a password reset disk or flash thumbdrive in Windows and put it somewhere safe.

  Here is a link to 11 other ways to reset the Windows password.

  Best regards
  ERICO

• I'm having a problem with my Opnegl ver 1.1, must be updated 1.3 for some reason that I can't seem to update or to locate in the profile of my hard drive... ERRRR... of suggestions?

  I'm having a problem with my Opnegl ver 1.1, must be updated 1.3 for some reason that I can't seem to update or to locate in the profile of my hard drive... ERRRR... of suggestions?

  Update your video card drivers. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• ICF on Windows 7: how to change the location of the home network be connected?

  Windows on Windows 7 firewall - ' Home or work (private) networks are not connected and 'Public networks' are connected. This prevents the PC to be seen on my home network.

  How can I change the location of the home network be connected?
  I have internet access but cannot connect to a network.

  Go to "Network and sharing Center" > click on "Customize" > change the location of the 'Public', 'private '.

  Edit
  Sorry the above is garbage, I was on mode vista.

  Try, 'network and sharing Center' in the section 'Show your active networks' - it can show 'Public network' or 'work '. If, so click on the one which is indicated and select "home network".

  Note:
  If the other PC on your network are Win XP you can change the name of working group of win7 in "MSHOME".
  IE "network and sharing Center" > click on the arrow down to the network discovery > change settings > tab computer name > change.

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• All locations of the project window are white - label color does not

  All locations in the project window are white! No color - not default same mango. Does not meet the new colors. The timeline is colorful. (Mac 8 core Pro Tour, Nvida 680 GFX, 16 G of ram etc..) I see nowhere else.

  DOH!

  The label box was not checked in the options of meta data. Now I feel stupid.

  However - Adobe - why make a separate column of the label? -Why don't you just give us the option instead, or more, to paint the tray of mango by default. I like mangos but not all the time.

• How to create the file on a location where the user with rights?

  Hello
  I have a requirement in my application a lot of program thatcreating a report to a file and it is written in a user's location. Now he specified directly as (c:\ or d:\...).
  
  The problem is that the user does not have right to access that directory. What I suggest, or I want to create is special reports on a location where the user with rights.
  
  Essentially in Windows system % UserProfile % having right to do anyting. Assume that the operating system that is installed in C: the % UserProfile % c:\documents and Settings\nom_utilisateur or D: then D:\Document and user Settings\nom.
  
  How do I get this help please me.
  
  Good help will be appreciated.
  
  Iqbal

  Hello
  The best practice would be to create the file in My Documents for the user currently logged in windows.

  Unfortunately, you did not mention your version of forms. In an older version like 6.x it is function in the library of d2kwutil called Read_Registry in the win_api_environment section, and in the more recent versions the same availble function in the library webutil to client_ name.

  So, you can read the registry database for the current logged in user using the function mentioned above of the location next to the register.
  My Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell folders

  There is an entry named personal. Read the path of this entry when running while generating / record file to the customer's location and save the file in this path.

  -Clément

• How to change the location where the scan of the computer updates the file?

  I would like to know how to change the location where the scan updates the file.

  HI ROT2,.

  It depends what printer and the software you use?

  Normally, you will find a 'save to file Option save' like the screenshot below.

  

• Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

  

  This is a double post of a following:

  Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

• I can't connect to wifi?

  Hello

  For awhile now, my laptop does not connect to WiFi, it will not show again all WiFi connections. I have read questions posted by others on this site and I've tried steps as the removal of all WiFi connections made in the pass, troubleshooting and following the steps, etc. Troubleshooting continues to advise me to activate the wireless feature and I do, but it doesn't seem to register? He always tells me that it is off, even if it's on. I have had absolutely no problem before, I don't know if I clicked accidentally something settings, but has happened for some time now and I really want to solve this problem because I use a cable Ethernet instead of WiFi which is very inconvenient.

  Hello

  Check with the system manufacturer, their documentation support online and drivers,
  and ask questions in the forums about known problems. Some laptops have access to keys
  turn the WiFi on and off.

  Actually try updating your driver and disabling the network logon:

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually
  using the methods below is preferable to ensure that the latest system drivers
  Creator and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - left side, click on manage
  Remove the wireless network - right-click of networks - networks-
  RESET. Start - Connect To - to log on to the network.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can not connect via WiFi

  Hello!

  I recently got a laptop and I can't connect to my laptop wwhen network frist launches the application finds net work >
  but then the now net go strives to find. This is due to?
  1 / wifi is on.

  2 / all of the settings are correct as a tell?

  can someone help

  Hello!

  Recognition of new networks or peut t you find any networks?
  Please describe your problem excatlier.

  But for most of the problems of WiFi: do a pilot and a BIOS update.
  Turn off firewall
  Disable all the security features of the router
  Make sure that the laptop and the router use the same WLAN standard.

  Good bye

• Can I connect to wifi using an older version of XP pro?

  Hi, I tried to connect to a wifi system library with my Windows XP pro system. The OS is the drive immediately and has not been updated. It does not seem an option in "Network connections" for the wireless, but it has broadband services. I tried to connect with it, but without success. I don't see any of the available wifi signals shown. I have to upgrade to a later version of XP to see the 'Wireless Network Connection' option? The problem is, I have no way to upgrade, unless I can do it by downloading the file to update with my other computer that connects. Is it possible to connect with the XP version I have? Thank you very much!

  The basic problem is that when Windows is freshly installed ("just behind the disc") missing drivers for a large number of materials, including in the case of laptops, which often use custom hardware.

  You need to go to http://www.dell.com/support/home/us/en/19?c=us&l=en&s=dhs and enter the Service of Dell (which is supposed to access you a page of download from Dell that uses drivers for your particular hardware configuration, rather than all the drivers for your Dell generic type).

  Dell recommends that the drivers are installed in a particular order: http://www.dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=bsd&docid=DSN_1A0C0937D62A8739E0401E0A55174744

  The Broadcom driver that you have installed is to the network (wired) Ethernet controller.  You must also install the driver for the wireless card.  Dell has installed several different models of wireless cards in the Latitude D620.  If using the Service tag, it does not narrow down, see if you can identify the make and model by looking at the entries in the Device Manager for the "Network controller" or "unknown device".

  You can also see if the system information tool (start > run > msinfo32.exe > OK) provides information of brand and model of the wireless card.  Go to components > network (not, as you might assume, under "Resources").