ATRIX HD: delete the mail on the device, but not server

Similar Questions

• Application installs the device but not visible

  Hey there everyone,

  I have a small application that uses GPS and connects to a server using HTTP. When you are testing in Eclipse with the emulator, everything works perfectly. However what over-the-air installation of the Unit indicates that application installed successfully, but another, under Options > Advanced Options > Applications, I can't find the app anywhere. Also, I can't delete the app from the phone.

  I then tried to make a more installation of air using the emulator and then saw that during the installation, I get an IllegalArgumentException followed by a NullPointerException followed, successfully installed. No idea what could be the cause of the difference? No idea how one can go about fixing this problem?

  Kind regards

  Schalk

  JAD file problem prevented editing app of correctly.

• Delete the ROW (but not the LUN) mapping file

  I am looking for a test of consistency here.

  I want to delete a ROW of a data store map file but does not affect the LUN.  The original question was that the virtual machine has a physical RDM mapped mode that would fail to vmotion.  vCenter reported that the ROW was not available on the other hosts; We checked that the LUN has been.  I ended up remove the ROW of the vm, quick vMotioning of the virtual machine and add the row as a new disk (virtual mode this time), actually create a new mapping file.  Now, all the works of the feature and the machine can vmotion around the cluster.

  It is now a week now, and all is well.  I would like to go back and remove the original (defective) rdm mapping file.  I've never done this, so I would like someone to check that there is no effect on the LUN it is / was mapped to.

  Furthermore, it's all about vSphere 4.1.  Problem was discovered to plug the hypervisors to ESXi 4.1 800380.  The virtual machine with the issue has been glued on an ESXi 4.1 host 433742.  It was the latest patch.  Machine virtual don't vmotion to other hosts until they were patches, while she probably had nothing to do with patch levels.

  Thank you

  Craig

  Hello

  You cannot delete the ROW from the data store where the virtual machine is running, because it is attached to the virtual machine.

  If you are talking about the old file RDM, which was under the old data store where previously the VM was lying and there is nothing to do with your existing VM that's running, you can remove the same. But if the same RDM file points to the current running VM, then you cannot delete the same.

• CHKDSK deleted the folder but not the content

  Hi guys,.

  Today, win7 found that I had one of my hard drives (not the os disk) to chkdsk, and like a good user, I did exactly that. After restarting, the folder that used to be on this disk had disappeared. The hard drive is a 500 GB WD and the record was about 400 GB of wholesale. I went back to 'My computer' and noticed that the amount of free space was the same that before the folder has been deleted, then the files in the folder should always be there, but I can't access...

  Someone has any idea how to access the files?

  Thanks for your thoughts...

  Hi Mr. Taher,.

  Thank you for your answer, but I have not followed your steps (sorry for that), and I found the missing folder. Apparently, chkdsk finds some flaws in this case and made a new folder on the same drive, witch, I couldn't see (checked hidden files). I ran auslogics on this disc (it took more than 5 hours) and there was a new folder that was not visible. I typed in it and there was this missing folder (he was appointed: found.000 /...), and most of my missing files is back...

  I always find it very strange that a program such as chkdsk can simply modify any folder on any of your drives without even asking, but who I am?

  Once again, thank you for the reply,

  see you soon

• I downloaded an e-mail that contains the music, I deleted the email, but the music continues to play despite having deleted the history etc.

  I down loaded an e-mail that contains the music, I deleted the email, but the music continues on whwenever game that I connect despite having deleted the history etc.

  {Ctrl + J} t0 open downloads window. Right click on this audio file, and then click remove from the list of

• OfficeJet 7310 all-in-One: the device is not complete - Officejet 7310

  Initially, a 10 on my network windows desktop could no longer communicate with my Officejet 7310 all-in-one ethernet connection.  The Office recognizes the 7310 as a printer, but not as an all-in-one.  I tried to reinstall the software using the prescribed protocols, without success. I decided to ignore the problem.  The Office could still use the 7310 as a printer, but not as an all-in-one. In addition, my two laptops could always use the all-in-one features.

  Today, no reason apparent, the all-in-one feature has stopped working on my windows of 10 laptops.  When I tried to scan a document, I received a message that says: "device to complete installation. Attach the usb cable or reinstall the software. "I am more able to reinstall the all-in-one software.  Just like with my office, my laptop can use the all-in-one printing function, but cannot use the functions of HP Solutions Center.

  I used the protocols recommended - uninstall the 7310, running windows disk cleanup, run ccleaner registery cleaner, closing all devices on the network except the 7310 and a laptop.  Nothing works, despite several attempts on various computers.  Is no longer, I can install the software of HP Solutions Center on any of my windows 10, 64-bit, PCs - wired or wireless.  The 7310 is essentially a 'brick', because it no longer works as an all-in-one.

  What can I do to fix this? Help.

  Hey @fatz2fly,

  I don't think that you have missed something, but I recommend you uninstall a more holistic approach at this stage. I know that this appears at first sight very complicated, but I burst in instructions step by step to make it easy to follow

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
     • Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  2. Delete the printer devices and printers and the driver from the properties of the server. See the instructions below before proceeding to step 3.
  3. Download the software and choose Save as, save to desktop >AIO_CDB_Net_Full_Win_WW_130_141.exe
     • After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
     • Locate and open the folder starting with 7z (example: 7zS2356)
     • Open the Util folder
     • The CCC folder
     • If you have a computer HP run the L3uninstall.exe. If you have acomputer no HP run the L4uninstall.exe
  4. Once the uninstall is complete, reboot the computer
  5. Download and run CCleaner - How to use CCleaner.

     Installing software on the computer with a registry key, its place would be like trying to paint a wall with a hole in it, you need to patch the hole first. Repair the registry, and then install the software. Registry cleaners can be useful tools to solve certain types of problems in the registry, as those that are created when a program does not properly uninstall or a malware infection is not cleaned properly.

     This suggestion is not a document of HP, it is my own opinion. My preference is CCleaner, I use it on my computers. If you have a registry cleaner already, or that you prefer, you can use it.

• Follow these steps to reset the registry settings and options for Windows Installer.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec /Unregister, and then click OK.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec/regserver, and then click OK

* Note: there is a space between the c and the /.

If you do not at this stage, use this link to perform another way. Restart Windows install

1. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup
2. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
3. Restart the computer
4. Download and run the HP printer install wizard for Windows
5. The HP printer for window installation wizard was created to help Windows 7, 8, 8.1 and 10 users download and install the most recent and most appropriate HP software solution for their HP printer.

Please let me know if that solves the problem, or if you need assistance. Thank you!

_______________________________________________________________________________________

REMOVE THE DRIVER FROM THE PRINT SERVER PROPERTIES

1. in the folder "devices and printers".

2. choose "print server properties.

• Win XP - with no printer selected, click 'File' then 'server properties '.
• Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
• Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

3. click on the "Drivers" tab at the top of the window "properties of the print server.

4. choose the printer that you want to uninstall, and then click 'remove '.

5. choose "Remove driver only.

6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

• If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

Now return to step 3 of the instructions above.

• BlackBerry Smartphones Emails sent from the device is not displayed in the "sent"box and "BIS" question

  Dear all and Rim:

  New to the BB world, need more help...

  AOL mailbox to connect with 'Tour' with success, the service provided by Verizon.

  Emails sent from the device are not show to AOL "Sent Box" or "IMAP" Outlook Express / outgoing server "POP" record "SMTP."

  Really need copies of "Sent Box", thanks for the help!

  Also try to put in place 'BIS' accout, error message says:

  "Your account is not accessed through a browser HTML...".

  Please use your device to access the Black Berry Internet services"

  I used this link:

  https://bis.na.BlackBerry.com/HTML?brand=VZW

  Thank you,

  Jan

  For the mail issue seems to send me a copy is the only way to go, right?

  This would be a solution.

  And on the BRI, my test was on a PC, it did not work...  Anyway, I was going to connect to the BIS to work on my question above, but seems that it does not help now, then it does not matter if I enter or not.

  Well, it's quite strange... I just used who link me (from a PC) and get my BIS account very well. You can, however, use the interface for device BIS - watch this demo that I you provided above for instructions on this. BIS is simply a service provided by your operator. The PC/Web site method and device interface - these are simply two different interfaces in the same Department, so using one or the other is not serious... they cause the same thing.

  Good luck!

• Error when trying to create a collection of Solr (java.io.IOException: the device is not ready)

  Hello, everyone.

  I am trying to create a .cfm document which delete and then re-create a specific collection of Solr, index and optimize it.

  The removal works perfectly.

  Unfortunately, creation it doesn't, at all.  I get the following message:

  Cannot create the collection publicsearch - an error occurred during the creation of the collection: java.io.IOException: the device is not ready.

  This is a server of Windows 7 under Apache and CFServer 9.0.1 (the version before Verity was cut).  I get no more detail than an error message.  Any idea what could be the cause?  I googled this and I see a lot of similar questions, but not quite what I have going on.

  Thank you

  ^_^

  So much worse... someone didn't bother to inform the proponent that the access to the collection AND the path to the directory that contains the collection for are different on this other server.

  Fixed.

• Devices to connect to the airport, but not to the Internet

  Hi all; Here's my situation:

  I just bought a new Airport Extreme to replace my old router (Linksys). In our House, we have two iPhones 6, as well as the iPad, Apple TV and MacBook Pro that were all bought again this year. All these things were able to connect to the internet using our old wireless router.

  As I have configured and installed at the airport, various devices have been able to connect without being able to connect to the internet (i.e. AirPort Utility, the airport connection is a green dot, while the actual internet connection is an orange): first it was the MacBook having this problem while the phones and the iPad have been completely connected. After I simply rebooted everything several times - i.e. the modem, router, and MacBook - I finally got the MacBook fully connected (without really changing all the settings, which are all entered correctly). Now, however, it is the two iPhones that will connect the airport but not actually in the internet.

  Any ideas? I must say, these strange little problems idiopathic who seem to always pop up with Apple products are starting to really bother me... I never got my MacBook to connect to the Apple TV via AirPlay.

  Any time you change the material or providers of Internet services, networking, it's always a good idea to perform a complete recycling of your network equipment power. Check out the following Tip of an airport users for more details on how to do it. Please post back your results.

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• Question of Wlan Qosmio F50-108 - the device may not be present

  Hello.

  I have a problem with my wirreles driver.
  When I try to install, it gorge yourself me the following error message: "the device may not be present or may have been ejected / disconnected from the system." Insert or reinsert now. »

  Hope that this problem can be solved :)

  To my knowledge, this message is displayed during the installation of the wrong drivers or is not compatible

  Have you chosen the right WLan driver?

  As far as I know, the laptop uses Intel 5100AGN wireless network card and the Wlan driver can be found here also:
  http://APS2.toshiba-tro.de/WLAN/

  Check it!

• Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the drop-down list box. Any ideas on how to solve this problem? I tried to use the toolbar Customize to drag an icon to the toolbar.

  Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the mailbox (impossible to select) drop.  I tried to use the toolbar Customize to drag an icon to the toolbar, but it doesn't work anymore. Using Mail 9.2 and OS X 10.11.2.  Any help is appreciated.

  The Send button will not be activated unless the message can be sent. Are you sure that you have entered a recipient and the account is online?

  The connection doctor (window menu) displays errors.

• niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

  Hi all!

  I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

  Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

  I also downloaded example c# measure DC Voltsto compare with my request.

  Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

  DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

  I guess it is function of device PXI!

  I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

  NOR-DAQmx 8.9.5

  NOR-DMM 3.0.1

  NI-VISA 4.6.1

  NOR-MAX 4.6.2f1

  Roberto

  Hello Robson,

  Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

  KB 33A96PCW: receive error-1074118656 when running OR DMM screws

  Let me know if this might help.

  Best regards.

• Error message when I run delete the query in SQL Server 2008.

  Error message when I run delete the query in SQL Server 2008 SP3.

  Error message:

  MSG 0, level 11, State 0, line 0
  A serious error occurred on the current command.  The results, if any, should be discarded.

  I never got any problem since 5 years.

  Please let me know what is the cause of the problem.

  You can get a response better/faster if repost you your question in the instances of SQL Server dedicated from Microsoft here:

  http://social.technet.microsoft.com/Forums/en-us/category/sqlserver .

  Thank you.   :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)