Can't resize object horizontally

Similar Questions

• Can't resize object

  Hello. I am a beginner Flash user. I build my website using a flash template, that I bought. There is a kind of object (it's called sprite 45) which is like a box (I'll call it the mystery box). There are superimposed on a text with my bio box in the text box. When I run the test for the flash movie, the bio gets up very close. Its width is limited by the mystery box. It is very narrow, barely more than an inch, making it difficult to read the bio. It is possible to scroll the bio up a downstairs, but it is still too narrow. I would like to expand the mystery box. However, unlike the text box, it does not seem possible to do.

  I have no idea what a sprite object is, and basically very little idea of what I'm doing. Can anyone help?

  Thanks for any help you can give.

  Best - cat

  Use either transform tool to change the size of your mystery box.

  or

  Select it, goto Properties Panel and change its width.

• I can't resize the frame proportionally and object set and I can not drag and copy objects.

  Hello

  more than an hour on these problems:

  (1) I can't just drag and copy an object more

  (2) I can't resize an object and its setting selecting just. I can resize the frame only (not proportionally, however, doesn't matter the number of keys that I use!). Not the object it contains.

  I work with INDESIGN CC 2015 latest version (I've just updated) and on MAC OSX Yosemite 10.10.5

  I regret the money I spend each month to pay for these programs.
  Whenever I update them I have 1000 problems.

  I don't know even how to replace the preferences that I don't know what I should replace. And sorry if I sound stupid, but when you have to deal with a stupid task is what is happening. I refuse to understand.

  Honestly, this is such a stupid problem, and it should not exist on a first place. BAD BAD BAD ADOBE!

  Chiara

  Hello

  two days after, and a new update, it was back again.

  I think they were all preferences.

  @Rob: I used command-Shift and it always works when the black Selection tool is active. By selecting and dragging to create a copy of the object.

  It was just strange and frustrating.
  Thank you for your answer!
  Chiara

• When I create any object and select the object I can't resize

  Hello

  I have a version of the track of the Illustrator, something I problem with my selection tool when I select any object or text I can't resize it there are no show any option for this, happens on the last day. I have reset my Illustrator, but it still has problem. Please give me a solution.

  Thank you

  umangkansagra,

  How about Ctrl / Cmd + Shift + B to switch between showing and hiding the bounding box?

  Absence of any (other) cause/cure, try the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• With the help of Ia 3 - I can't resize all select objects

  Don't know what happened, but...

  When I click on an object, I am unable to adapt to the size.  I tried the selection tool and the direct and same selection tool problem.

  I can move the object, but it can not resize.

  help please - everyone

  My guess is that you just want to drag a handle with the selection tool, but that seems not work. No doubt the framework encompassing has been disabled. Go to the VIEW: see the bounding box. then give it a try. If it says "Hide encompassing" then I'm dead wrong and just ignore me.

• Can't resize an object with the Selection (black arrow) tool?

  If called on an object, I am suddenly unable to resize it by dragging one of its corners with the selection tool.

  The object is not locked. The layer which is the object is not locked. I can only move the object.

  If I use the transformation tool, I can also resize, but not with the black arrow by dragging its corners.

  What could cause this problem?

  I read in this form of stimulus Illustrator command-Option-shift key. It solve my problem?

  View > Show Bounding Box - or - shift + command + B

• I can't resize/rotate object

  Newbie here!  I have a picture that I can catch and move, but I can't resize by clicking on a corner.  In fact, when I run the cursor over them, there isn't a box around it, it just shows the path and anchor point.  Did disable a setting?  Is there a reset settings button?  I have to do something with layers?  Need some help here.  Probably simple uber.  Thank you!

  Turn on encompassing.

• disable by program "resize objects.

  I have a program that fits very well with some screen resolutions, I the "scale all the objects on the façade" selected. Is there a way to disable this option programmatically? I would like the user to be able to make the window smaller if you wish, but force the window to achieve if it is small enough.

  Desire:

  (1) to start the program: expanded PS, objects of scale to allow different resolutions

  (2) the user resizes the window, turn off "resize objects with the size of the window. Keep the current sizes and spacing, forcing the user to scroll.

  Thank you!

  I think you can accomplish your desired behavior with a combination of the Panel Resize event and the method of the scale:

  

• Since I've updated, I can't resize rectangle shapes.

  Since I've updated, it seems I can't resize rectangles or rounded rectangles of edge more.  The bounding box is not present, only the nodes to round the corners.  Only, this seems to be the case for the shapes rectangle, ellipse and other polygons are not affected.  Have they changed something and it is a feature, or is this a bug?

  I tried restarting and all that, it always happens across many files.  Help!

  Seems to be a bug. Try to convert the Rectangle to live at a dead using the object > break down.

• WHEN FIREFOX OPENS ICAN CAN NOT RESIZE THE WINDOW USED TO BE ABLE T-HOW I FIX IT?

  CAN NAT RESIZE THE WINDOW WHEN FIREFOX OPENS

  This has happened

  Each time Firefox opened

  == DOWNLOAD SYSTEM CLEANER

  Make sure that the window of Firefox is not maximized.

  Open the system menu via Alt + space and see if you can resize the window.
  If it works, then close Firefox to save the setting.

• ActiveX error message: "run-time error '429': ActiveX component can't create object" when running FSX 2004

  Hello, I hope someone can help. I use Windows 7 64-bit. on a high spec pc. When you run FS2004 (Flight Sim program) I get the error message "" run-time error '429': ActiveX component can't create object ". " That seems to relate to the flight or the CMF management computer program. This error seems to inhibit access to the CMF. I tried to load the latest ATI driver, but that makes things worse. Has anyone encountered this problem before? Hope it

  Thanks in advance

  Ianzee

  Hello Diana

  Unfortunately, none of the above worked. However, I downloaded a file recommended by Flight1 (the creators of one of the 2 games I had problems with) surprisingly, thisinstantly solved the problem it is called http://www.flight1.com/dx7vb.exe.

  Perhaps in the future someone else have this same problem with Vista 64-bit where the game, they could also try this "correction". Of course, it worked for me!

  Thank you very much for your help & trouble in front of me, it is appreciated.

  Cordially Ianzee

• I can't resize my game just in mode window to move it to my second monitor on a system bi-ecrans

  I understand that secrurity was added to two monitors.  My problem is when I play Wow and set mode window I can't resize liked my game and put it on my second monitor.  I have not found a setting that I need to change.

  Hi beachside301,

  Welcome to the Microsoft Answers community.

  I will need more information to help you better.

  · Did recent changes to the computer?

  · Is this the first time you arrive on this issue?

  · Did you use any third party registry patches or updates recently?

  The restore of the system on your computer

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start , type system restore in the Search box, and then click System Restore in the programs list.

  If you are prompted for an administrator password or a confirmation, type your password or click continue.

  1. In the System Restore dialog box, click choose a different restore point, and then click Next.
  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  3. Click Finish.

     The computer restarts and system files and settings are returned to the State they were in when the restore point was created

  For more information visit http://support.microsoft.com/default.aspx/kb/936212/

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Automation server can't create object

  Under Windows XP Home Edition, access user accounts in Control Panel.  Then I select "change the way users log on and out" and the error message "Automation server can't create object ' results."  How can I fix?

  This response helped me a solution.  I tried and it did not fix the problem, but it changed the error message (a message about a recently installed program has disabled the Welcome screen and the fast change).  I remembered having seen that elsewhere in this forum, I went and found that.  He spoke a * GINA. DLL and suggested he remove the registry (to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\Current Version\Winlogon).  When I did (after properly backing up the registry, of course), voila! My problem has been resolved.  So thank you all!

• How can I resize a picture using Picture Manager please?

  How can I resize picture using Picture Manager please? Let's say I want to put 4 x 6 cm for a given photo dimensions. I tried to resize , but is it compresses the picture to send by e-mail etc... It is basically a photo compressor.

  How can I resize picture using Picture Manager please? Let's say I want to put 4 x 6 cm for a given photo dimensions. I tried to resize , but is it compresses the picture to send by e-mail etc... It is basically a photo compressor.

  =============================
  If you are running Windows XP... it is a free software
  The PowerToy that is useful for resizing of the pictures:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Go to the following link and download and
  install: ImageResizer.exe
  http://www.Microsoft.com/windowsxp/downloads/PowerToys/xppowertoys.mspx
  (does not work on Vista)

  Then, you can open any folder containing
  images and you will have an option to resize.
  Just right click the selected image files and
  Choose resize images in the menu. You
  can select a picture or an entire group.

  The program will place the resized in copies
  the folder with your originals.
  (Tip: * never * overwrite your originals)

  To ensure that images in both portrait and
  landscape orientation are resized to the
  same dimensions... go to... Advanced...
  and enter the largest number in these two areas.
  IOW... for 600 x 800... Enter 800 in these two areas.

  (Tip: even if you resize the Photos to the same)
  dimensions (original)... the file size will be greatly
  reduced).

  =====

  If you want to change the proportions of a picture...
  you have to reframe it... otherwise it will be distorted.

  The following freeware has a tool of good harvest.
  Just select a thumbnail and press X to open the
  Council for culture. (Tip: always save your editing / cropped /)
  photos resized under a new name)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm

  The following tutorial provides information on the creation of a
  2 "x 2" photo ID, but the steps would be
  basically the same for any size.

  Now, open the program and select (highlight)
  the image you want to change.

  According to... to... Edit / crop Panel (or type... (X)

  Click on the button 'Set Ratios of paper'.
  (it's just to the right of the proportion of paper
  fall of window)

  Click on the 'Add' button and enter... 2 x 2 "
  Click on... OK / OKAY... (this will give you the square
  format you need)

  You can resize the selection frame by dragging
  reposition by dragging corner handles
  the arrow of the 4 channels. At the end... Click on the 'culture '.
  button.

  Now... to... File / save as...
  Choose a backup location, enter a new name for
  the photo and choose a format to save in...
  Left click on the Save"" button.

  =====

  Info about photo manager
  If you resize a photo with Picture Manager and
  save it when you see the dialog box saying:

  "There are changes that have not been saved"

  The original photo will be overwritten (replaced)
  with the rezized version... IOW the original will
  be unrecoverable.

  To keep two versions of the picture, resize it
  and go... File / save as... Enter a new name for
  version resized and on the left, click on the "Save" button.

  When you close the photo manager and see the
  dialog box:

  "There are changes that have not been saved"

  On the left, click the do not save"" button. Now
  have both versions.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I resize a digital image using software of photo gallery to keep my digital images to be cut during printing on standard paper by a commercial processor? MP

  How can I resize a digital image using software of photo gallery to keep my digital images to be cut during printing on standard paper by a commercial processor? MP

  How can I resize a digital image using software of photo gallery to keep my digital images to be cut during printing on standard paper by a commercial processor? MP

  ====================================
  Sometimes the only resizing is not the answer because the
  the original size is different from the print size.

  You may need to crop photos to the size you want
  print to ensure that no clipping will occur. Cropping
  to a different aspect ratio will lose some parts of the picture but
  at least you have control over it.

  Windows Live Photo Gallery is a cropping tool.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.