can't see files in the import library? Cleaning open key with LR Panel and click on all the keys!
Hello
I can't see my files in the import library.
I cleaned my keyboard with LR 6 open.
I hit all the keys!
Adobe does not support LR6 on the phone!
Grateful if you can help
Bill
Hi Bill,
If you talk on the left side panel in Lightroom, please press the F7 on the keyboard, you will be able to see the Panel on the left.
I would like to know if that's what you're looking for?
Kind regards
Tanuj
Tags: Photoshop Lightroom
Similar Questions
-
Hello
I am trying to establish a SIN by connecting a WD My Passport HDD to the USB port on my router ASUS RT066N-U.
First the player was also dismantled. Reformat to FAT32 BACK cured that.
The iMac was the NAS drive and the two folders that were created automatically in it. However, when I tried to copy the folder music on the NAS drive iMac, he said he was unable to do so and I have to click on authenticate. I could see no button to authenticate to click, so I reconnected the drive directly to the iMac and copied the folder through directly. Later, I plugged the drive into the router.
Now I can't see the file on NAS music in the Finder. My Sonos system seems to recognize, then I guess it's there, but I can't see or access for maintenance.
I was wondering if it was because of the FAT32 formatting, but I suspect not. Any ideas?
El Capitan running
OS X do not supports NAS, contact the developers of WD on their product.
-
Can't see files in the USB.
Original title: USB key
I can't see the files in my key USB, even if choose to display hidden files
Hello Chetan,
To help you further on this issue, I would like to know a few question substantially the same.
1. is this problem limited to any specific pen drive?
2. do you get any error code or error message when you connect the USB?
3. have you made changes on the computer before this problem?
I would suggest trying the following methods and check if it works for you. Usually this problem is caused due to the virus on USB or hardware related issues.
Method 1:
Run the hardware and devices Troubleshooter and check. This troubleshooting will help you solve common problems with hardware devices.
Refer to the following Microsoft Help article to run the troubleshooter.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Run the Microsoft Safety scanner and check if there is no threat of viruses found.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.
Method 3:
Try to change the drive letter of the USB and check if the problem persists.
See the following Microsoft Help article to change the drive letter.
http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter#1TC=Windows-7
Please reply with the status of the issue so that we can better help you.
-
Seagate drive in the BIOS but can't see it in the file manager
Earlier this week, I installed a Solid State Drive as my boot drive. It works very well. I want to use 2 TB Seagate that came with my Inspiron 3847 as backup devices (slave) and I also want to take 10 Windows out of it. I can see the drive in device (drive 1) Manager and in the BIOS (SATA 2), but I can't see it in the file manager so I can reformat the drive. This particular model (ST2000DM001-1ER64) has no jumpers to set it as a slave drive. Seagate said it is automatic. I am stuck as to how I solve this problem. Any help is appreciated. Thank you!
Hi ssd user,.
Happy new year!
There is no such thing as master or slave with SATA drives. Try to go to disk management, search your drive and check if a drive letter has been attributed to it. I suspect that you must select a drive letter, then it should appear in the file Explorer.
-
I can't see Komplete in the library update and cannot see a window of plugin
Hello
I am trying to load third-party plugins in Mainstage 3 like Komplete, V-Station, Sylenth, etc...
I do not see these plugins anywhewre, texts or patches to THE, and the menu to view the Plugins simply has nothing, not even in the background of the window.
Can you please help?
If you create a new instrument Channel Strip and click/input/instrument and scroll the instruments to THE, see them? Otherwise, open the plugin Manager, select third-party plugins and rescan.
-
C: drive turned into raw and now I can't see file display options etc on my computer.
Original title: instability of the system.
I have xp s3. I had trouble with my main drive lately. Previously, I had my shot raw c drive and I can either logon in safe mode. I used checkdisk by my slave hard drive someone to another disk and it comes back with a few interface problems. Yet once the obtained c drive turned into raw and now I can't see file display options etc on my computer. I tried to use to start the system restore but not its use before and now. I have avira for antivirus and Registry Mechanic only. Is there a way I can fix my windows without formatting evrything?
Hi Windflash,
I had a similar problem also and it turns out that the hard drive is dead. You can probably do is to connect the hard drive to a working another computer & use data recovery tools to recover files from it but usability will always be a question.
Data recovery is an another stressful job as for me it took 3 days to recover data to a 500 GB drive.
After which I tried to format it own it but has not as well so I poured the reader.
You can try my snack suggestions if your drive starts to work again I strictly recommend you to use it as a primary drive.
Let me know if it helps.
[If this post was helpful, please click "Yes" under "Was this helpful option?". If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
How can I see file published evaluation of simulation results in a non - LMS?
How can I see file published evaluation of simulation results in a non - LMS?
I created the demo, training and evaluation. I don't know how to get the results of the evaluation at the end of the assessment.
Scores will be stored in the system variable quiz like cpQuizInfoPointsscored. You can insert a slide of score or create a slide of score by inserting these variables. It is a way to present the note to the user. To get "out" of the course, you will need JavaScript to transfer the values of these variables.
-
Can not see any of the website features especially icons to link
Can not see any of the website features especially icons to link
See:
-
How can I make the copy on my smaller computer that I can't see half of the image?
I tried to enlarge the characters but it is too big and now can not see half of the screen?
Hello
Change the screen resolution to reduce its size:
http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
And if you don't see the OK button to apply the changes, press the ENTER key instead of clicking on the OK button.
See you soon.
-
I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems
Thank you
PeterHello
The easiest way is with a crossover cable - a special wire to connect the two systems.
You can get one at your local computer store - they are not expensive.Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
set up the network.====================================
Or you can set up a wired or wireless network.
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlAd-hoc networking
http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
Set up a computer-to-computer (ad hoc) network
http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspxHow to set up an Ad Hoc wireless network in Windows Vista
http://www.home-network-help.com/ad-hoc-wireless.htmlCreate an ad hoc WiFi network secure on Windows Vista
http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htmNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
The sp1 and sp2 already included if I just reinstall vista hp? Windows Update is not offer them and I can't see them in the history of the update.
We do not know what is on your HP recovery disks.
Click Start > right click on computer > properties > he'll tell you he which SP you have installed.
For all Service Pack/Windows Update issues:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
You will receive the best help here.
See you soon.
Mick Murphy - Microsoft partner
-
I just bought a new laptop and have downloaded Lightroom 4.4. The font size is tiny and unreadable. I looked in preferences to see if the font size can be redefined to allow me to read the screen but can't see anything (except the magnification tool application) to read the screen.
Any ideas?
Hello
You can change the font of the user interface of the options below.
- On Windows, choose Edition > Preferences > Interface > font size:
- On Mac OS, choose Lightroom > Preferences > Interface > font size:
Change font size according to your need.
You must close out of Lightroom and restart for the change to take effect.
Let us know if this helps!
Kind regards
Vivet
-
How can I transfer files to the cloud?
How can I transfer files to the cloud?
The first thing to do is to transfer a copy of the file / files out of your Onedrive account to your computer.
Then go to https://cloud.acrobat.com/ where you can sign if necessary.
Then, download the files that you want to the section "Files" of your account.Submit a Word file to PDF Pack you'll want the file / files available on their computer for submission to the subscription to the service.
Be well...
-
You can edit vmx file while the virtual machine is running? And is it safe?
You can edit vmx file while the virtual machine is running? And is it safe?
Hello
Moved to the forum of the Virtual Machine and the guest operating system.
If you edit the VMX while the virtual machine is powered on change is not levied until the power off then power on (not reboot) and there is a good chance that the change will be deleted when turn you off the system. So it is not safe to do so.
Best regards
Edward L. Haletky
VMware communities user moderator
====
Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast -
It's been two months that I downloaded photoshop cs6 and it was fine, but now when I try to open the program, he said that I have to uninstall. When I go to the control panel and click on uninstall, so I can install it again, it just says: I need to clean my computer or restart, because it can not uninstall the program. I already did and it is still not uninstall. How should I proceed?
run the cleaner, the use of the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
and then reinstall it.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
Maybe you are looking for
-
Satellite L505-S6946 - touchpad back on w / Fn + F9...
I turned off my touchpad to use a conventional mouse, and now that I need it, it will not turn back.Can someone give me another way to get it to turn back? I tried to take out the battery without the power connected, still won't turn back. Thanks for
-
I want to add values from the individual at the end of an existing channel
I have a program the calulates several values of my data and you want to write each one sequentialy in a new way that I created. How to assign a value to the end of a string?
-
Unflatten string Variant received the error 122
Hello In this VI, when I used a 13-character string to write data flattened in a file, I got error 122 when new reading and unflattening. But with string which was not 13 characters, the unflattening operation has worked very well. Any ideas?
-
Impossible to install my HP printer to a wireless connection
I can't install my HP C309a printer, no driver support came to the top, help! I would like to install and have a wireless connection. Have uninstalled and tried reloading / relocation with CD disc that came with the printer only to have the DRIVER IN
-
The polygonal Lasso tool is nuts now!
I have Photoshop CS6 Version 13.0 x 64. Recently, I upgraded my system to the Version OS X El Capitan 10.11.5. Since I have my Polygonal Lasso tool does not work. I can't start in a specific place, the starting point does not appear. Then I hold