can't see the new startup experience and recent file

Similar Questions

• I can't see the videos on youtube and other sites.

  Something has gone wrong with my Dell laptop, I can't see the videos on youtube and other sites. I updated latest version FlashPalyer, it does not solve the problem. Facebook also not opening. I'm trying to see the online football match, where I used to see, I am not able to see it too.

  Hello

  1. you are trying to access YouTube from within Internet Explorer?

  I suggest you to follow these steps and check if that helps.

   

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information is useful.

• Can't see the new external hard drive connected to my iMac for my MacBook?

  Hi all

  I connected a new 8 TB external Seagate HD to my iMac and I try to see it from my MacBook Air and MacBook to my partner.

  It is properly formatted (journaled MacOS and GUID) and have not had any problems with the 3 TB drive, that we were connected before.

  File sharing on and everything seems normal.

  For the life of me, I can't drive/partitions from the MacBook, although he is able to see the old drive.

  Any help appreciated.

  Thank you

  Hey Dr.Tobyk,

  Not being not able to see a new disk on your network, when you can still see the old drive would make me crazy. I use sharing like this every day and you know how convenient it can be.

  I always look at how a new drive to share implementation is always How to connect with the file sharing on your Mac this article helps me to solve the problems which arise.

  Things I always look how implementation of a new drive, that it is in the list of shared folders and check that user boxes has the correct user with the correct access.

  See you soon

• Can't see the new Photoshop CC interface

  I use CC - audit "about Photoshop" in the menu file confirms that, but I do not see some new elements of CC interface.  In particular, I don't see the new layer comp controls.  Any thoughts?

  CC of Photoshop and Photoshop CC 2014 are two completely separate applications.

  If you choose Help - system information and see 14.x.x in the version field, you use the other oldest.

  He settled under a separate position in the creative cloud application.

  

  -Christmas

• can not see the stars of review and comments from clothing sites

  E.g. #1 = 'Landsend.com', click on 'man', 'pants '.
  http://www.landsend.com/IX/mens-clothing/men/mens-pants/index.html?SEQ=1 ~ catNumbers = 1 & 2 ~ 23 & visible = 1 ~ 2 ~ 1 & cm_re = D-4-8 & pageSize = 72

      Can see pants and pictures, but where the usual 1-5 *s are, it says "Rating".  I click on the "Men's Pleat Front Traditional Fit No Iron Dress Twill Trousers" (the first pants picture/option, Item # 426850-A61) and up pops all of the information EXCEPT the photo/s that should be on the left, and the "Views + Reviews" with all of the comments under that.
  

  For example #2 = "underarmour.com', 'Man', 'Accessories', ' Backpacks and bags ', 'AU Hustle Storm backpack.
  http://www.underarmour.com/shop/us/en//pid1238440-040#BV-reviews

      Can see    "****1/2* (2) Read All Reviews"   but the reviews are missing and when I click on "Read all Reviews", the screen moves down, but nothing else changes and the reviews are not there.
  

  For example #3 = "eddiebauer.com', 'Man', 'Shirts',"Classic Fit legend wash Oxford Shirt - solid short sleeve"
  http://www.eddiebauer.com/EB/men/shirts/index.cat

      Under "Men's Shirts", I see the stars and how many people have rated it [ex.- *** (17)].  If I click on the ratings/stars or on " Classic Fit Legend Wash Oxford Shirt - Solid Short Sleeve", the next page shows up-
  

  http://www.eddiebauer.com/catalog/product.jsp?ensembleId=44679 & & categoryId = 9 & categoryName = SHIRTS & pCategoryId = 2 & pCategoryName = MEN & gpCategoryId = 1 & gpCategoryName = EB & catPath = ~ ~ categoryId = 9 ~ ~ categoryName = SHIRTS ~ ~ pCategoryId = 2 ~ ~ pCategoryName = MEN ~ ~ gpCategoryId = 1 ~ ~ gpCategoryName = EB & viewAll = n & pg = 1 & cmPathInfo = null

     ...however, the stars, ratings, and comments are not there.  The picture/s of the shirt are there, as well as the size, color, add to bag, etc.
      On Amazon, I can see the ratings and comments.  This tends to be a problem with clothes companies and their customer service has not been able to tell me why I can't see what should be there.  Internet Explorer Does show the missing info; I haven't tried Chrome.  I want to work with Firefox.  Any suggestions?
  

  On the first page, next to the marking of Word, I get five sailboats (blue is good, gray is not good). This image comes from the external site "landsend.ugc.bazaarvoice.com." You can see the images if you load them directly? Here is an example: http://landsend.ugc.bazaarvoice.com/2008/2_8/5/rating.gif

  When I click through to the pants, the first image that shows on the left is this one: http://s7.landsend.com/is/image/Lands.../426850_AJ13_FF_KHA?fmt=jpeg, rgb, qlt = 80, 1 & op_sharpen = 0 & resMode = sharp2 & op_usm = 0.5, 1, 3, 0, & icc=sRGB%20IEC61966-2.1,relative & iccEmbed = 1 & rgn = 0, 0, 2000, 3000 & scl = 5.882352941176471. If you click on it directly, it works?

  If you are unable to view these images directly, sites can be blocked. Check out the first section of this article: the problems that cause to not show images.

  If you CAN not display these images directly, but not when they are incorporated on the main site of Lands End, you may be blocked "third party" images. You can check here:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste perm and make a pause so that the list is filtered

  (3) if the value is not 1 (and the line is in bold), click permissions.default.image , then click Reset.

  If the above fails, it could be a problem to Add on. Could you try Mode without failure of Firefox? It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe help

  Help > restart with disabled modules

  In the dialog box, click on 'Start mode safe' (not Reset)

  Any difference?

• Can't see the new masseges

  I'm not sure where I need to post

  I have windows 7 64

  When I get massege someone I can't see my massege and it take me in the middle of the conversation.

  When I get some new massege someone it take me again in the middle of the conversation.

  Skype uses the local time of the computer to label messages and now everything is messed up.

  The only one you can do now is to clear your whole cat or attempted to correct the incorrect timestamp using 3rd party applications.

  http://community.Skype.com/T5/the-Skype-lounge/delete-a-conversation/m-p/743928#M56527

• Can't see the new PXI cards on my remote

  I am currently reconfiguration from a 1006 PXI chassis for a new program. It was adding three new cards in the system. The configuration is currently:

  1 - controller NI PXI-8176
  2 - OR PXI-6040E
  3 - OR PXI-8421
  4 - OR PXI-6533
  5 - OR PXI-6533
  6 - OR PXI-6533
  7-
  8 - OR PXI-6713
  9 - OR PXI-6040E
  10 - OR PXI-2590
  11 NI PXI-4204 (new)
  12 NI PXI-6515 (new)
  13 NI PXI-2570 (new)

  Each card can be seen by MAX on the PXI chassis when started in Windows very well. However, when I start in the program in time real and you connect to the chassis using my office (and MAX), the remote system appears well, but with none of the new cards listed. (They are listed in the vacuum or unknown). I am at a loss to get these cards recognized. They seem to be installed correctly, as the own of the MAX station can see them. But apparently I missed a step in their installation... I am relatively new to this, can you help me?

  Thank you
  Dan Marlow
  General Dynamics Land Systems

  Bingo.

  That's all. Cards have been recognized immediately once I upgraded to LabView 7.1 and real-time 7.1 7.2 OR-DAQ.

  Thanks, gang!

• Can't see the new table in the PS Group Manager

  Sorry guys, I'm kinda new to storage management. I worked in existing bays built by the last person who was here. Now that he is gone, I was charged with the addition of two additional paintings/members to our existing EqualLogics. Problem is that I see the 2 members in Group Manager, but not the 2 new ones. We have a data center managed by 3rd party and they say that they have wired everything in. Both are supposed to be cross-connected series via a connection to one of our servers and the other in an existing table. Now physically I don't know how everything is connected. I console just in Workgroup Manager. I don't see new members there. I tried to connect from one of the servers connected using PuTTY and the connection series. I've used sides of Baud has offered online. But I can't connect what either. Sorry if this sounds very basic - but what don't get me? How to see these devices to even configure the network adapters and RAID?

  Thanks for any help guys

  Hmm... what exactly do you mean with "the table is connected to the active controller?

  Guys in your data center can make the photo of the back of the EQL? See the two CMs with the cables and the LEDS may help.

  When putty.exe close the window immediately that there is probably nothing on the other end, but when it remains open, it is normally a good sign. Press 'enter' or ctrl + c. If you see garbage or nothing the connection parameters doesn't match. Once again its 9600/8/1/n.

  Note: if ever you restart an active EQL the CM moves which makes it difficult when with only a working serial cable.

  You can also try is turning off the device. Verify that your connection to the CM right and turn on again. You will see output of a CM of start-up.

  Do not use is not a black font on a black background in putty also makes life easier ;)

  Kind regards

  Joerg

• When a right click to create a new folder, I can't see the new option 'file' in the menu. Why?

  I'm running Win 7 Ultimate and it happened on my system for the first time: when a right click to create a new folder, I can not see new option 'file' in the menu.
  I remember that I did not create new records from the last 5 days, so I can't say when the problem came. But I remember that yesterday I uninstalled 'free. '
  antivirus application which disappointed me a little. And it was the only action I suspect to have effect on my system.
  So I can't create folders in the usual way. And I need help to solve the problem. Moreover, the cmd command line works and when I type:
  MD x:\AA,
  The result is a folder named AA at the root of drive x:

  Again, I ask for help.
  Thank you
  Chris

  Hello

  Go to the following site.

  File Association fixes for Windows 7 - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/

  In the blue box, click on the item in folder and download the file to your desktop.

  Unzip the file.

  Double-click the folder_fix_w7.reg file to add the information in the registry.

  In the meantime, you can also use the keyboard shortcut to create a new folder.

  Just press Ctrl + Shift + N.

  Concerning

• Can't see the new NIC in ESX 3.5U4 (NC7170)

  Hello

  I added a NETWORK card double my ESX 3.5 U4 server port, however, I can't see it under network adapters. Here are the HP NC7170 cards that are on the HCL and use the e1000 driver. I've successfully used these cards before, however, I have never tried to add a network card after an ESX installation was made. I repeat not rather an installation just to get the OS to see the network map.

  Runs the command lspci, in the middle of all the other recognizable NIC, I see this:

  11:00.0 PCI bridge: Intel Corporation: unknown device 0329 (Rev. 09)

  11:00.2 PCI bridge: Intel Corporation: device unknown 032 a (rev 09)

  Does anyone know why this NETWORK adapter is not recognized?

  How can I get ESX to recognize this NETWORK card?

  Thank you!

  on my way home, I remember that in previous versions of esx, there was an order of search/scan for new hardware, but I don't think that his associates more...

  I think running a

  > esxcfg-boot - p

  Will force the system looking for new PCI devices, but since your server see them as unknown, I assume that the operating system knows they are there? -What does mean

  > esxcfg-NICS - l

  diisplay? which shows as unknown as a PCI device network cards?  The next step I would try would be updated the firmware from 'server' itself...

  .-----

  http://www.rack42.com

• Can't see the new hard drive on my Satellite Pro 6100

  I bought a new Toshiba 40 GB hard drive for my Satellite Pro 6100.
  I installed it in the Bay, but it is not recognized in the BIOS, or when I try to reinstall using the recovery disk!
  Bios recognize that there are in the car, even if it is not formatted?
  I'm missing something?

  Thanks in advance

  Neil

  It should work!

  The reader should also be recognized that even he is not formatted...

  3 things you can do:
  At the start you can go in bootmenu and check if the drive is recognized on the 1st controller.
  If this is not the case, check the configuration of the drive (master, slave, CSEL).

  If this is not enough to check the toshiba support website and download the latest version of the bios (probably you already have, check as mentioned above)

  If this does not work your new drive (or worse: your controller) could be faulty. If the reader of the Moose still work on your laptop, check the 40 GB drive to another laptop or PC with adapter ATA connection normal.

• Can't see the new data store

  I created a new LUN on my NetApp storage system.   In VMware, the iSCSI initiator of software in "Static discovery" shows that the objectives have been discovered.  On the NetApp, one system "> iscsi initiator show" shows that the iSCSI HBA is properly connected to the storage system.  However, when I conduct a new analysis of data warehouses in vSphere client, the new LUN never appears so I can format it with VMFS.  Anyone know what could be the problem?

  Thank you!

  You introduce the LUNS to the host/initiator group?

  André

• can I have the catalogue of all and any files outside the program in another hard drive?

  Hello

  I installed lightroom 4.4 on my hard drive

  I would like to have all the files in another hard disk, overview and catalog

  just create a catalog to another hard drive?

  I mean I want to only keep the program in a single disc

  and in the second drive hard all previews files, inches, full screen and slide show hidden and so on in the second hard drive

  Can I do?

  How can I do?

  Just create the catalog in the secondary hard drive, import files?

  Thank you!

  Okay, so create the catalog on the 2nd SSD and then import

• What can do XP Pro SP3 OS be upgraded into without loss of programs (though of course, some are not compatible with the new operating system) and user files and info?

  Operating system
  MS Windows XP Professional SP3 32-bit
  CENTRAL PROCESSING UNIT
  Intel Pentium M 740
  Dothan 90nm technology
  RAM
  1.50 GB Single-Channel DDR @ 166 MHz (2, 5-3-3-7)
  Motherboard
  TOSHIBA ECU00 (U1)
  Graphics
  Monitor Plug-and-Play (1280x768@60Hz)
  Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family
  Hard drives
  97 F TOSHIBA TOSHIBA MK1032GAX (PATA) 43 ° C
  Optical drives
  MATSHITA DVD - RAM UJ-YEARS 840
  VUNSH ZC5QZWX SCSI CdRom Device
  Audio
  Realtek AC97 Audio

  Hello

  Vista is no longer sold by Microsoft.

  Microsoft now sells Windows 7.

  You can't do what you want to do.

  "Upgrading from Windows XP to Windows 7"

  Introduction

  To upgrade your Windows XP computer to Windows 7, you will need to select custom during installation of Windows 7. A custom installation keeps your programs, files or settings. It is sometimes called a 'clean' for this reason installation.

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here's more information to consider before upgrading;

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• Can not see the bar of tasks and start button

  I was trying to connect my video camera and software, when I lost my taks bar and my desktop icons. I can open programs by going to Task Manager, but I would rather just my icons. Can you help me?

  Hi RamonaDoles,

  ·         Have you tried to check in safe mode?

  You can check if this article helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen