Can't see the new NIC in ESX 3.5U4 (NC7170)

Similar Questions

• How to install the new NIC in ESX 4 without having to rebuild?

  I have a server ESX 4.0 (u1) running with a NIC card double port gig.

  I need to replace the network adapter with a quad port NIC dual port.

  I prefer to install the new NIC card and do not have to reinstall ESX for her to see the map.

  Can you give me any advice or point me to the documentation that describes how to do this?

  Thank you for your help.

  If the new NETWORK adapter is on the HCL, simply turn off and install the card NETWORK. No reinstallation is required.

  Supported Community, community rewarded - do questions answered and allocation of points for the job of marking. It helps us all.

• Can't see the new external hard drive connected to my iMac for my MacBook?

  Hi all

  I connected a new 8 TB external Seagate HD to my iMac and I try to see it from my MacBook Air and MacBook to my partner.

  It is properly formatted (journaled MacOS and GUID) and have not had any problems with the 3 TB drive, that we were connected before.

  File sharing on and everything seems normal.

  For the life of me, I can't drive/partitions from the MacBook, although he is able to see the old drive.

  Any help appreciated.

  Thank you

  Hey Dr.Tobyk,

  Not being not able to see a new disk on your network, when you can still see the old drive would make me crazy. I use sharing like this every day and you know how convenient it can be.

  I always look at how a new drive to share implementation is always How to connect with the file sharing on your Mac this article helps me to solve the problems which arise.

  Things I always look how implementation of a new drive, that it is in the list of shared folders and check that user boxes has the correct user with the correct access.

  See you soon

• can't see the new startup experience and recent file

  I installed the latest version of Photoshop 2015.1 nov. on the two PC Win 10, Italian version, but no way to see the new experience of starting or recent files. In 'General Preferences', I activated the 'show beginning workspace... '. "and"see the recent file... ». So, what can I do?

  Hi patty,

  The new splash screen in only supported in English, French, German and Japanese now

  From now there is no information about the language support.

  Kind regards

  ~ Mohit

• Can't see the new Photoshop CC interface

  I use CC - audit "about Photoshop" in the menu file confirms that, but I do not see some new elements of CC interface.  In particular, I don't see the new layer comp controls.  Any thoughts?

  CC of Photoshop and Photoshop CC 2014 are two completely separate applications.

  If you choose Help - system information and see 14.x.x in the version field, you use the other oldest.

  He settled under a separate position in the creative cloud application.

  

  -Christmas

• How to manually configure the IP, subnet, gateway on the new NIC in ESX Server 3.5

  Hello, first let me say that I am relatively new on ESX Server and so the question I ask here may seem trivial but I looked through the documentation and other threads and that you have not found quite what I'm looking for.

  I have an ESX Server 3.5 with a number of production virtual machines running works very well.  I need to install a second NETWORK adapter because my use of the network will go through the roof, once I convert a production server used in a virtual machine on this machine.  I have a server Dell PE 2950 and I bought an Intel Pro/1000 PT dual port PCI-e adapter that is on the list of hardware supported.  In the reading I did, every reason to believe that when I set up the server, the new network cards will appear in the VIC where I can assign to a new Vswitch and so forth, so I get it.  What I don't see in the VIC is a way to specify the NETWORK adapter settings.

  The problem is that the switch I connect to, put in place by our network management staff, will not be DHCP settings of NETWORK card for me, I have to manually configure the IP, subnet and gateway until I can start talking.  When I initially installed ESX, I was able to provide all parameters of NETWORK card installation - which is not the case now with the new NETWORK card and the operating system all this up and running.  How do I do this?  Thanks for any help.

  ... BillH

  Adding another physical NETWORK card to your vSwitch will make this new Teddy to comply with policies of vSwitch.  In particular, the load balancing algorithm will determine how the additional bears will get used.  By default, this is done with switch port ID.  This means that each vm NIC that feeds, will choose the next available bear to talk about.  The virtual NIC will essentially be Robin and choose the next Teddy online to talk it through and will so remain like that until a failure condition occurs, or the virtual machine is restarted.

  If you know a particular VM is a high user of I/O, and you want to separate its traffic from the rest of your virtual machine, and then create a new portgroup on vSwitch0, assign this new portgroup 3rd Teddy and use the other two as before.  In addition, in your regular exchanges, remove or make sleep 3rd Teddy.  In this way you completely isolate the heavy vm from the rest of your systems.

  -KjB

  VMware vExpert 2009

• Can't see the new masseges

  I'm not sure where I need to post

  I have windows 7 64

  When I get massege someone I can't see my massege and it take me in the middle of the conversation.

  When I get some new massege someone it take me again in the middle of the conversation.

  Skype uses the local time of the computer to label messages and now everything is messed up.

  The only one you can do now is to clear your whole cat or attempted to correct the incorrect timestamp using 3rd party applications.

  http://community.Skype.com/T5/the-Skype-lounge/delete-a-conversation/m-p/743928#M56527

• Can't see the new PXI cards on my remote

  I am currently reconfiguration from a 1006 PXI chassis for a new program. It was adding three new cards in the system. The configuration is currently:

  1 - controller NI PXI-8176
  2 - OR PXI-6040E
  3 - OR PXI-8421
  4 - OR PXI-6533
  5 - OR PXI-6533
  6 - OR PXI-6533
  7-
  8 - OR PXI-6713
  9 - OR PXI-6040E
  10 - OR PXI-2590
  11 NI PXI-4204 (new)
  12 NI PXI-6515 (new)
  13 NI PXI-2570 (new)

  Each card can be seen by MAX on the PXI chassis when started in Windows very well. However, when I start in the program in time real and you connect to the chassis using my office (and MAX), the remote system appears well, but with none of the new cards listed. (They are listed in the vacuum or unknown). I am at a loss to get these cards recognized. They seem to be installed correctly, as the own of the MAX station can see them. But apparently I missed a step in their installation... I am relatively new to this, can you help me?

  Thank you
  Dan Marlow
  General Dynamics Land Systems

  Bingo.

  That's all. Cards have been recognized immediately once I upgraded to LabView 7.1 and real-time 7.1 7.2 OR-DAQ.

  Thanks, gang!

• Can't see the new table in the PS Group Manager

  Sorry guys, I'm kinda new to storage management. I worked in existing bays built by the last person who was here. Now that he is gone, I was charged with the addition of two additional paintings/members to our existing EqualLogics. Problem is that I see the 2 members in Group Manager, but not the 2 new ones. We have a data center managed by 3rd party and they say that they have wired everything in. Both are supposed to be cross-connected series via a connection to one of our servers and the other in an existing table. Now physically I don't know how everything is connected. I console just in Workgroup Manager. I don't see new members there. I tried to connect from one of the servers connected using PuTTY and the connection series. I've used sides of Baud has offered online. But I can't connect what either. Sorry if this sounds very basic - but what don't get me? How to see these devices to even configure the network adapters and RAID?

  Thanks for any help guys

  Hmm... what exactly do you mean with "the table is connected to the active controller?

  Guys in your data center can make the photo of the back of the EQL? See the two CMs with the cables and the LEDS may help.

  When putty.exe close the window immediately that there is probably nothing on the other end, but when it remains open, it is normally a good sign. Press 'enter' or ctrl + c. If you see garbage or nothing the connection parameters doesn't match. Once again its 9600/8/1/n.

  Note: if ever you restart an active EQL the CM moves which makes it difficult when with only a working serial cable.

  You can also try is turning off the device. Verify that your connection to the CM right and turn on again. You will see output of a CM of start-up.

  Do not use is not a black font on a black background in putty also makes life easier ;)

  Kind regards

  Joerg

• When a right click to create a new folder, I can't see the new option 'file' in the menu. Why?

  I'm running Win 7 Ultimate and it happened on my system for the first time: when a right click to create a new folder, I can not see new option 'file' in the menu.
  I remember that I did not create new records from the last 5 days, so I can't say when the problem came. But I remember that yesterday I uninstalled 'free. '
  antivirus application which disappointed me a little. And it was the only action I suspect to have effect on my system.
  So I can't create folders in the usual way. And I need help to solve the problem. Moreover, the cmd command line works and when I type:
  MD x:\AA,
  The result is a folder named AA at the root of drive x:

  Again, I ask for help.
  Thank you
  Chris

  Hello

  Go to the following site.

  File Association fixes for Windows 7 - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/

  In the blue box, click on the item in folder and download the file to your desktop.

  Unzip the file.

  Double-click the folder_fix_w7.reg file to add the information in the registry.

  In the meantime, you can also use the keyboard shortcut to create a new folder.

  Just press Ctrl + Shift + N.

  Concerning

• Can't see the new hard drive on my Satellite Pro 6100

  I bought a new Toshiba 40 GB hard drive for my Satellite Pro 6100.
  I installed it in the Bay, but it is not recognized in the BIOS, or when I try to reinstall using the recovery disk!
  Bios recognize that there are in the car, even if it is not formatted?
  I'm missing something?

  Thanks in advance

  Neil

  It should work!

  The reader should also be recognized that even he is not formatted...

  3 things you can do:
  At the start you can go in bootmenu and check if the drive is recognized on the 1st controller.
  If this is not the case, check the configuration of the drive (master, slave, CSEL).

  If this is not enough to check the toshiba support website and download the latest version of the bios (probably you already have, check as mentioned above)

  If this does not work your new drive (or worse: your controller) could be faulty. If the reader of the Moose still work on your laptop, check the 40 GB drive to another laptop or PC with adapter ATA connection normal.

• Can't see the new data store

  I created a new LUN on my NetApp storage system.   In VMware, the iSCSI initiator of software in "Static discovery" shows that the objectives have been discovered.  On the NetApp, one system "> iscsi initiator show" shows that the iSCSI HBA is properly connected to the storage system.  However, when I conduct a new analysis of data warehouses in vSphere client, the new LUN never appears so I can format it with VMFS.  Anyone know what could be the problem?

  Thank you!

  You introduce the LUNS to the host/initiator group?

  André

• I've just upgraded photoshop 2015 (November) and I can not launch the new "start" interface. How should I do?

  I have a creative cloud and photoshop runs the last update, but I can't see the new interface 'Start', I saw on several videos. How should I do?

  You have to edit > Preferences > General > checked to see the 'Start' workspace when no. Documents are open?

  

• I can't install the new iOS on my iPhone. I get the same message that I am not connected to the Internet. I am connected through cell phones and Wifi. What I don't see?

  I can't install the new iOS. I get the same message saying again and again that I am not connected to the Internet. I have both cell than on wfi. What I don't see?

  Apple pulled iOS 9.3 for older devices. Wait for a patch.

  (140932)

• I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture. How can I fix it?

  I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture.

  How can I fix it? Someone please help

  Hello

  What operating system do you use?

  If you are using windows 7, I suggest you to follow the link and set the picture on the screen of the link fill and check.

  Make changes to your desktop wallpaper slideshow

  http://Windows.Microsoft.com/en-us/Windows7/make-changes-to-your-desktop-background-slide-show