Can't see the other hand google calendars

Similar Questions

• The computers on the home network can't see the other

  Hello

  Portable Windows 7 Ultimate my two computers cannot see each other on the home network. Both have their firewall off the coast. We have McAfee installed (but disabled). I can't ping or computers. Both are on the same workgroup. Both are on the home network. Both have their network discovery is enabled. Both have active LLTD protocols.

  A computer cannot find homegroup on the other computer. I tried both ways. All important services are successfully started and running. No problems with network connectivity to the internet. I can ping sites like google.com and yahoo.com. I can't just ping the other laptop on the network. Any ideas?

  Thank you

  SS

  FYI: I have UltraVNC running on both computers. However, the program does not work b/c computers can't see each other. I also have LogMeIn installed on both. This works because logmein works via the internet.

  Hope that you have found your answer now. I had the same problem and mine was the computers have been appointed the same you have he tried but if not try this:

  ·        Step 1) on your keyboard, press the 'key Windows and pause pause' to bring up the 'System Menu'.

  Step 2) when the "System menu" appears on the lower right, click "change settings"

  Step 3) click on "change" on the "System Properties".

  Step 4) Change the 'computer name' (must be DIFFERENT! to other computers)

  Step 5) press "ok" (you will get a pop up just press ok)

  Properties of step 6) on systems ""change "" the ""computer name " the same as the one on (step 4)"

  Step 7) click on ""okay ' and let the computer to restart (If it does not restart just disconnect and reconnect) "

  Follow these steps and you shouldn't have a problem.

• Can't see the other person, but they can see me. All of the solutions posted did not help.

  I don't see the other person when I Skype, but they can see me. The only thing I see in my screen is their profile picture and myself. How can I overcome this? I use windows 8.1 and a computer dell laptop.

  Have they turned on their webcam?

• Can't see the other Web sites I created

  In BusinessCatalyst, I'm doing the dashboard of one of my sites, and it let me just get one, not the other. Can someone tell me how to change the dashboard from other sites I have the catalyst?  Using the old interface of catalyst that I could move around, it seems now I'm stuck on one site and can't seem to others.

  Very frustrated!  Help, please!

  Annette

  Oh my God, Brad, who did it!  Thank you, thank you, thank you!  I was just about at my wits end!  Geez, you'd think go on your dashboard would you outline your sites and make it easy for you to access all of them.

  Anyway, I'm not on and on, but I thank you very much for your quick response and accurate!

  Annette

• How can I see the other sessions NLS_PARAMETERS

  Reposting this here, did not know that this forum existed.
  
  For debugging purposes, I would like to see the NLS_PARAMETERS to other active sessions. It is on the basis of data Oracle 10 g Enterprise Edition Release 10.2.0.4.0 - 64 bit.
  
  No of here's what I'm looking for:
  

  SQL> select * from v$nls_parameters; 
  -- Will only show me the settings of my own session.
  
  SQL> select * from nls_database_parameters;
  -- Lists permanent NLS parameters of the database

  Pls advise.
  
  -Johan

  Indeed, this information is not readily available. NLS environment is stored in a variable UGA and other sessions do not have access to it. Qualified Oracle engineers would be able to get this information from a dump of the UGA, but otherwise, it is not recoverable.

  I still do not see a way to connect ALTER SESSION through a trigger (as it isn't a DDL).

  -Sergiusz

• VM on NW even can't see the other

  Hello

  We currently have a NW 4 PC.  One is a windows 2003 domain controller that also acts as a DHCP server.

  2 PC are under windows 2003 with VMware server, run a virtual machine containing a particular set of software.   Virtual machine use bridged NW and have an assigned IP address of the domain controller is registered on the domain.  The firewall has been disabled on all machines (the NW is private with no Internet connection).

  the address of the host PC1 i.e. = 10.0.0.30 (Windows XP)

  PC1 VM address = 10.0.0.40 (Windows 2003 server)

  PC2 = 10.0.0.50 host address (Windows 2003 server)

  Address of VM PC2 = 10.0.0.60 (Windows 2003 server)

  The domain controller, host, all machines in the NW (physics and VM) machines can be crazy, and have a response time, which makes sense, given that they are all connected to the same switch.

  However, the virtual machine on PC1 can not ping the VM on PC2 and vice versa.  Also, using windows Explorer NW that it is not possible to browse the files shared on of VM1 VM2.

  Is there a framework and limits that I missed in what concerns the multihost and VM from the NW?

  Any help/suggestions would be greatly appreciated.  Thank you!

  Apart from the need to give the Windows OS cloned a new identity (SID, etc.) check files .vmx of guests of the duplicate MAC addresses.

  You can also use "ipconfig/all" in the prompt.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• When I right click on an image, I can't see the option "search Google for this image. How can I get that back?

  I don't know what that I have maybe changed, but right-click on any image, gave me the option in the Google search menu for the image. This option is gone.

  This is not a built-in feature. Have you used any of these extensions:

  • https://addons.Mozilla.org/firefox/addon/imageSearch/
  • https://addons.Mozilla.org/firefox/addon/GoogleSearch-by-image/

  You might first check the addons page to ensure that it is not disabled. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. On the right side, off the cluster of extensions at the bottom.

  If it is enabled, it could be a problem with some of the code in the extension is not compatible with Firefox 40, or one other extension it bumping from the context menu.

• in my home network xp laptop in 'My network places' can't see the two other vista computers portable altought they can see computer laptop xp

  in my computer laptop network xp home in my network places can not see the two other vista computers portable altought they can see xp laptop computer and access this computer laptop xp shared docs, laptops 2 vista can see eachother so working group name is on all computers the same portable 3, all are connected etc. What can I do to see the portable 2 on my computer vista laptop xp

  Hi wiking17,
   
  Follow the suggestion given in the article below to resolve this issue:
   
  You can't see the other computers in the workgroup on the network on a Windows XP-based computer
   
  Additional reference on:
   
  Troubleshooting of network domestic

• Windows Live Messenger won't let me see the other person

  I install live messenger 2011, then resart the computer and it works again 2009

  also can't see the other person, but they can see me

  Hi scottdahl,

  I suggest you to send your query in hotmail forum for assistance on the concern.

  Link, please refer to:http://www.windowslivehelp.com/product.aspx?productid=2

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the safe mode and still no success. Help, please.

  Question
  I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the mode 5 firefox safe and always without success. Help, please

  To help other users find solutions, please come back to this Thread and connect you to the
  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• IM using Skype on a samsung galexy s5 why can I not see the other videos of people who uses a laptop?

  Why can't I see the other video of people on my samsung galexy s5 if they are on a laptop?

  Theybsay they can see me, but all I see is myself. I just downloaded Skype 3 days ago so id assume that it is the most recent version.

• I can't see the videos on youtube and other sites.

  Something has gone wrong with my Dell laptop, I can't see the videos on youtube and other sites. I updated latest version FlashPalyer, it does not solve the problem. Facebook also not opening. I'm trying to see the online football match, where I used to see, I am not able to see it too.

  Hello

  1. you are trying to access YouTube from within Internet Explorer?

  I suggest you to follow these steps and check if that helps.

   

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information is useful.

• I have 8 GB of RAM, but computer shows only 2 GB as usable. How can I get the computer to see the other 6 GB?

  Installed 8gbs of windows 7 on a dell xps700, usable 2gbs RAM. How can I get the computer to see the other 6gbts.

  Original title: usable ram

  More than 2 GB says:
  http://support.Dell.com/support/eDOCS/systems/XPS700/en/SM_en/specs.htm#wp1057323

• Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection?

  Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection?  owner of 192.168.1.104:50768 result [svchost.exe] TCP - PC:5357 ESTABLISHED

  Hello

  Thanks for asking!

  This is because the network discovery is turned on.

  If you want, I suggest try tuning off the COAST of the discovery of the network and check if it helps.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Reply back with the results. I'd be happy to help you further.

• When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

  When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

  Randy Ruttger

  Thanks for the follow-up.

  Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

  The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

  You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

  On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

  So the solution to the problem you presented in this thread could have been...

  1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

  2. move to a different version of Premiere Elements (which you did)

  I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

  Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

  Best wishes

  RTA