Can't see vSphere objects

Similar Questions

• VCAC 6 can't see vSphere computing resources in my group of fabric

  Hi all

  I hope there, can someone help me. I don't know why I can't see vSphere compute resources in my group of fabric.

  After installation and connection to VCAC successfully, I discovered that there is a default tenant called vsphere.local that I used to create a new store of identity in which I used the Active Directory configuration, the next step was to store information to identify the user for endpoints in this case, my endpoint is only vCenter so I created and configured a new endpoint for a my vCenter. point the address I used was "' https:// IP address/sdk" (I don't know whether to put sdk or not at the end in some blogs say it is necessary to include "sdk", I tried with and without good) then I tried to create a new group of fabric and when I click on 'New tissue group' the guest window doesn't show any computing resource of vSphere. " I found that one possible reason that would prevent me from not see compute resources could be because vmware services do not run on the VACA-IaaS machine that was not my case.

  Are there clues? or if I jumped a step when configuring tenant, of competence and of endpoint, can you please tell me.

  Thank you

  Carlos

  Hello!

  New endpoint must have the same name as the proxy agent (by default - vCenter). If you don't remember, you can check the name in Add/Remove Programs (name of the proxy agent).

  Coordinates of the VC in endpoint - https://FQDN/sdk

  And watch newspapers - Infrastructure - > monitor - > Journal.

• How can I see my object in image 3D of Labview optimization?

  Hey everybody,

  I am very new to Labviews interface and I was wondering how do I go about creating a VI (or sub - VI) to load my pre VRML file - which does not exist and display it using the 3D picture control.

  Looking for a very simple solution.

  Thank you very much!

  Hello

  OK, I get it now.

  "" On the front panel, you select the modern Palette ' graphics ' 3D Picture control .

  Kind regards

• Can't see LabVIEW Color Picker (assessment 2014 for Mac)

  Hi all

  I'm new to LabVIEW and tries to make a graph I did appear transparent.  According to http://forums.ni.com/t5/LabVIEW/Using-LabView-s-Color-Picker/m-p/575619/highlight/true#M269839, the color picker is available as one of the digital controls, but I'm not in there, or by shift and right click the mouse, nor in the Tools menu.  I've attached a screenshot of what I see.  Is anyone able to help me please?

  I didn't know about this thing.  I usually have the visible tool palette in a corner of my screen so I rarely used it. When I try, the tool palette appears, but I can't seem to open the color picker.

  [Edit: I've tried again.] I can make it work, but the context of click with the paint brush tool must be on the border--within one or two pixels. ]

  To make a transparent chart at the time of the change (as opposed at run time), go to the view menu and select the tool Palette. Do not ask why the tool palette is under the view menu, but not the Tools menu! The lower part of the tool palette has a brush and two areas that overlap. By clicking on the boxes shows the color picker. A bx is the foreground color and the other is background color. Once you have selected the color, you can apply it by clicking on the end of the paint brush on the object you want to change the color.   Graphics use several colors: Frame, area of tracing, scales, sliders, annotations, and perhaps others. You can also change these via property nodes.

  You may need to experiment to get the view you want. For example, the area of tracing both the framework must be transparent to see an object that is behind the chart.

  Lynn

• User with REPOSITORY_EXPLORER can't see repository work

  ODI 11.1.1.7

  We have two repositories - a job, a performance - and a user who is assigned the REPOSITORY_EXPLORER role.

  She can't see a repository when creating the connection. It connects to the correct master.

  Must be missing something obvious, but I can't understand it.

  Thoughts?

  -John

  You must provide to connect to the profile. You can even put a restriction more log on to the profile (if you want to opt for natural gas) by removing the profile of the specific object methods.

  Thank you

  Chantal

• Can not see nothing when I toggle mode

  Just updated to After Effects and when I hit the switch toggle/mode / I can't see objects null pull down help

  column of switches is not parent column, although they appear to be close between them. To expose the parent column, you can use the shortcut SHIFT + F4 (on Mac, it could be shift + fn + F4, depends on your keyboard preferences) or right click on the header of column and under the columns add the parent column.

  

• Database trigger can not see the package global variable after assign in my form

  Hello

  I faced the problem with the trigger and the package variable global using the form designer

  first of all, I get the local IP address machine using WEBUTIL in triggering of the PREFORM and initialize my global package variable by ' Client_Info_Pkg.Set_IP_Address (WEBUTIL_CLIENTINFO.» GET_IP_ADDRESS); ", then I tried to make the DML operation in my form and at the same time I trigger database also uses the package global variable of" Client_Info_Pkg.Gand_IP_Address; "to read in the package, and then insert it into the audit table

  
  

  The question this database trigger may not feel the initialization "Client_Info_Pkg.Set_IP_Address (WEBUTIL_CLIENTINFO. GET_IP_ADDRESS)' I did in triggering of the PREFORM and I used to wonder if oracle create new session to run this trigger so he can't see my boot or what?!. .

  the package

  CREATE OR REPLACE PACKAGE Client_Info_Pkg

  Global_IP_Address VARCHAR2 (100);

  FUNCTION Get_IP_Address RETURN VARCHAR2;

  PROCEDURE Set_IP_Address (p_Machine_Name IN VARCHAR2);

  END Client_Info_Pkg;

  /

  CREATE OR REPLACE PACKAGE BODY Client_Info_Pkg

  FUNCTION Get_IP_Address RETURN VARCHAR2 IS

  BEGIN

  RETURN Global_IP_Address;

  END;

  PROCEDURE Set_IP_Address (p_IP_Address IN VARCHAR2) IS

  BEGIN

  Global_IP_Address: = p_IP_Address;

  END;

  END Client_Info_Pk

  relaxation

  --------------

  CREATE OR REPLACE TRIGGER RUNERP.FO_DOC_TYPES_L_T

  BEFORE INSERT OR UPDATE OR DELETE ON FO_DOC_TYPES

  REFERRING AGAIN AS NINE OLD AND OLD

  FOR EACH LINE

  BEGIN

  IF THE INSERTION

  RUN IMMEDIATELY ' INSERT INTO FO_DOC_TYPES_LOG

  VALUES ("I",: DOC_TYPE_ID,: DOC_TYPE_VALUE,: DOC_TYPE_NAME,: Vip_Address' HELP: NEW.) DOC_TYPE_ID,: NEW. DOC_TYPE_VALUE,: NEW. DOC_TYPE_NAME, Client_Info_Pkg.Get_IP_Address;

  END IF;

  IF THE UPDATE CAN

  RUN IMMEDIATELY ' INSERT INTO FO_DOC_TYPES_LOG

  VALUES ("U",: DOC_TYPE_ID,: DOC_TYPE_VALUE,: DOC_TYPE_NAME,: Vip_Address) "USING: NEW." DOC_TYPE_ID,: NEW. DOC_TYPE_VALUE,: NEW. DOC_TYPE_NAME, Client_Info_Pkg.Get_IP_Address;

  END IF;

  IF REMOVE THEN

  RUN IMMEDIATELY ' INSERT INTO FO_DOC_TYPES_LOG

  VALUES ("D",: DOC_TYPE_ID,: DOC_TYPE_VALUE,: DOC_TYPE_NAME,: Vip_Address) "USING: NEW." DOC_TYPE_ID,: NEW. DOC_TYPE_VALUE,: NEW. DOC_TYPE_NAME, Client_Info_Pkg.Get_IP_Address;

  END IF;

  END;

  /

  Thanks in advance

  I solved my problem by using the CONTEXT object, Michael thank you for your interest.

• InDesign window Palette Too Short - can not see the options on the right

  Hello

  I have presented a Wishform of Adobe, but wonder if someone has solved this problem/bug. All of my InDesign CC 2015 palettes are too short and I don't see the options on the right side (for example. Layers palette: can't see the squares move a selected object from one layer to another. Palette of background tasks: can't see the 'x' which would cancel a background.) Have you tried to drag the pallets to the width of the full screen nothing works. Any help would be amazing.

  Thank you!

  This is how it should look like (screenshot of others): note the boxes on the right:

  

  This is what mine looks like when expanded to full screen. Still no boxes T_T

  

  

  Trash your preferences.

• Can't see vmdk file when you add a new hard drive to an existing vm

  I'm trying to attach a vmdk file that was recovered from a backup as a new hard drive to an existing test VM (version of the vsphere 4.0 client). I was able to successfully download the file in the data store but it is not available to select when I try to add a hard drive, on an existing virtual machine. The vmdk file has been recovered from a backup server no idea why I can't see it would be very appreciated

  Something does not fit here.

  Since the file names "...-0000003..." this seems to be a delta (snapshot) rather than a virtual disk of dish (base)! Thanks for posting (tie) the hard header file to see how it looks like and to know what lack us.

  André

• Can't see all hosts in vCenter - how to add?

  I am trying to import virtual machines in a configuration, but for some reason I can't see on the ESXi Server VMS in vCenter and can not see the other three ESXi hosts VMs

  I tried to add the host via the "attach Resource Pool" but I see no ESXi host and data centers?

  ESXi hosts are on the same network and I can see thme in vCenter

  Thank you

  It does not work. The single host, you will be able to use is within the DFS Client Center X.

  If you logically different containers, make different groups within the same data center.  This restriction has been in place since Lab Manager 3.0.0.

  http://www.VMware.com/PDF/lm40_installation_guide.PDF

  Page 9: vSphere 4.0 requirements and recommendations

  "The host allows you to create clusters and resource pools, but guests must belong to a single data center."

  Best regards

  Jon Hemming

• Can I run vSphere 4.1 hosts when you run a 2 vCenter 4.0 update server

  Can I run vSphere 4.1 hosts when you run a 2 vCenter 4.0 update server.

  The thing is that I don't have a 64 bit OS on my vCenter server and a new requirement was 64-bit DSN on the vCenter.

  So I want to install vSphere 4.1 on the hosts and vCenter 4.0 until a new server running is running.

  No, 4.1 hosts need a vCenter 4.1.

  See http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf

• where can I see the source of the data model?

  Sorry, very basic question... When I create table ADF business components, he created display objects and data controls. Then I drag a data control to create a table of the ADF in the properties of the Table, I can see ELs something like that for different areas. #{bindings. MyTableView.collectionModel}
  
  Where can I see the source code for these models such as collectionModel, pivotTableModel etc... ?
  
  In addition, the source code is available for example from the file Explorer in the rich client demo? A tutorial step by step for something like the file Explorer?
  
  Also, if I want to connect to a web service and get data to display on the screen, what is process that I have to take? To create entity objects, he always invites for a database connection. Should I create a simple java class that implements a data model to connect to the web service and then create objects to display on the screen? Then I'm confused what is the purpose of all controls data (data controls are created when I create a view object)?

  A quick response from web services - you can create a web service proxy and then drag that the data control palette or right click CREATE a CONTROL DATA - then creates the "public" interface to the web service through the data control palette.

  Concerning
  Grant

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I am trying to print PDFS from Safari, but can not see the page numbers

  I just opened a document PDF 700 + pages in Safari and need to print the odd pages and there, but I can't see the page numbers displayed when I scroll the document. When I view the same document on an iPad, the page numbers change when I scroll but on my iMac (with the help of Safari 10) they appear not at all - and 700 + pages is a lot to go wrong! The clues how I can spend on 'display the page number?

  The default Apple PDF Internet plug-in used by Safari does not display the page numbers (except if they are in the footer of the PDF document in question), and there is no setting in Safari preferences to turn on this feature. Your best bet is to download the PDF file, then open it in preview or Acrobat Reader, where the thumbnails will be the correlation to page numbers. Then you can select several arbitrary thumbnails using the control button to print those selected pages. In the Pages section of the print Panel, you select "Selected Pages in the sidebar".

  The PDF Internet plug-in installed by Adobe Acrobat Reader or Pro displays the page current and total page in its turnaround Panel. If there are page numbers in the footer of the PDF file accessed, they are not deleted. You must enable Internet Adobe plug-in to Safari preferences: Security Panel.

• How can I see external drives on the sierra?

  How can I see external drives in sierra?

  Menu Finder Preferences... > General