Telepresence - study map Exchange

Similar Questions

• Telepresence Addon for Exchange to book rooms video outlook

  Hi guys

  can someone tell where I can download the addon to install the application to the video meeting from outlook room booking?

  You can download here:

  http://software.Cisco.com/download/release.html?mdfid=283694653&flowid=46129&softwareid=280886992&release=TMSXE_4.0.1&relind=available&rellifecycle=&RelType=latest

  So that it work, if you have not already, you will need to purchase one of the option buttons that will allow your TMS communicate with TMSXE.  You can find more information at the bottom of the TMSXE data sheet:

  http://www.Cisco.com/c/en/us/products/collateral/conferencing/Telepresence-management-suite-TMS/data_sheet_c78-704865.html

• Problem of outlook MAPI and Exchange 2013 configuration - IMAP

  Hello

  We have installed and configured Exchange 2013 and configured system requirements

  We use the email id unique in several profiles, we can set up, but it will ask for the password again and again

  Exampale: 1) * address email is removed from the privacy * * 2) address email is removed from the privacy * * 3) address email is removed from the privacy * these 3 accounts I have to configure in 3 unique profile (MAPI or IMAP) machine but it is asking password often, so I would like to know that several account several profile is recommended or not? If recommended please if anyone knows resolution please send an email to * address email is removed from the privacy * or * address email is removed from the privacy *

  Kind regards

  Sahana Fernandes.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Office/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• Installs NIV Study Bible Zondervan to device - he wants to map, do not know how-Tungsten E2

  I just got the Zondervan NIV Study Bible software transferred to me of a previous user who said that he is not installed on any device.  They gave me the whole package and everything and I went to install it last night.  So this should be a legal transfer of the software under the usual EULA.  But he just had a quick start guide included.  I guess it could have been a real manual available for download on the Web site that is no more - just a blank page appears.

  It's software, as well as several versions of the Bible, including the Bible to study NBS itself which is in 4 modules which are quite large 2-4 m.  He mentions that the versions of the Bible can be installed on the expansion card, but don't give any instructions how to do this.

  When I started I had about 11 MB of free space on my TE2. I did the error I guess checked almost everything that needs to be installed.  And then there was a step that I noticed after I had clicked on next (or when it written in my tired brain) I've been doing the hot sync I think it was before clicking next.

  In any case, it is said the software requires 500 k the other stuff can be loaded to the storage card or device RAM and rquire 21MB of free memory to free memory (it's on the package not the brief instructions).

  He gave me some fatal errors, something about memory, probably because he was trying to install more than ago free memory in the device RAM.  So I had to do a soft reset several times.

  I figure out how to transfer the Bible versions previously installed in the card and then deleted from the device.  Syncs more installed hot more things and then crashed again.

  The 4 modules of the NIV study Bible now appear in the window where they can be demolished, but they do not appear in the window to copy the map.  I just checked again.

  Also the camera itself is only showing 168 29.7 M k and I'm afraid that doesn't do everything I need to do hot sync with other applications previously installed large companies that are very interactive, which allows me to take an application on the palm, and then update our site of co to upload and download of data.

  So any suggestions on how to get large applications of the power off and on the map?  Also I can't find where the stuff on my computer and I do not see it filed under hot sync options.

  I mean there may be a way I could wipe it all (but I'm a little afraid that he might not reinstall because she doesn't have a license key) and start over just belong at the same time, maybe just do the NIV study Bible by itself first which is the largest and pass the 4 modules, but there are 3090,2676,2484 2918 k respectively.

  So any suggestions would be appreciated.  I also checked the site Web of Zondervan and they don't show so, apparently, that this software is not supported over all Palm applications. I think I've seen a date of 2004.  But previous user said that she had used it on a tee.

  Palm v 4.5.2P

  WinXP sp2 with updates

  Thanks for any help you can give!

  Thank you.

  I had also tried other ways to get answers and got a more specific response on the right way to proceed.  Here is the link to the actual knowledge base article giving instructions specific since there are some files that must be on the Palm and some on the map, etc.

  http://support.Laridian.com/index.php?_m=Knowledgebase&_A=viewarticle&KBArticleID=380&ratingconfirm=1

  I sent Zondervan to see if they might be able to direct me to a downloadable manual.  Him referred me to laridan.com which is now supported by their software.

  I followed the instructions, taking account of certain things that were already where they should be, hot sync and it seems to work very well with 7.8 M of free space on my Palm which I trust is sufficient for my other very large applications.

  Thanks for your help!

  Message relates to: Tungsten E2

• Card mother query has Exchange my graphics card and noticed the clip was broken on the map it's fixable

  PMyCIe x 16 slot the clip is broken it's fixable because I put in a graphics card of only and it does not work

  I use Windows XP Professional

  Gordon

  Hi Goryon,

  You will need to contact the manufacturer of the motherboard or store local tech for more information on the broken slot.

• Cisco TelePresence Manager 1.7 with EWS 2007, Timezone and purpose of the meeting of the problems

  After having successfully configured the CTMan MS EWS CASE 2007 1.7 I am stumbling on two errors/bugs very subtle and boring between these two servers.

  1. the time zone in the confirmation e-mail sent by CTS Manager to the meeting returns

  501225

  Summary

  Unresolved zone mapping

  The problem lies in the information CTMan by EWS thrust. According to the text in the zone tags, CTMan maps time zone accordingly or it does not. It's really incredibly annoying.

  For example:

  Standard time this gets the mapping OK

  (UTC + 02:00) Harare, Pretoria it is not mapped OK

  (GMT + 02:00) Harare, Pretoria it is not mapped OK

  South Africa standard time , that it becomes mapped OK

  Update the file timezonemap.xml in the telepresence Manager would be a nice gesture by Cisco to avoid these horrible bugs.

  2. the subject meeting is always the same as the organizer of the meeting.

  In other words, the subject gets crushed by the meeting of the chain of the organizer for each scheduled meeting. I don't know how much of this is the fault of CTMan, because the resulting XML has this topic in the tags all wrong.

  Someone at - he dealth with these issues in the community?

  Any thoughts?

  Hello

  For the #1 question. I checked the file of zone mapping has the whatever you specified in version 1.8. From 1.7.2 the time zone (GMT + 02:00) Harare, Pretoria is present from the fix for CSCtj95619, but the time zone (UTC + 02:00) Harare, Pretoria is missing.

  For question #2, is due to a setting on the end of the Exchange. The mailboxes for the room have the DeleteSubject and AddOrganizerToSubject the value true properties.  Follow this guide #7 step to correct the problem:

  http://www.Cisco.com/en/us/docs/Telepresence/cts_manager/1_7/Admin/ctm_instalMS.html#wp1097531

  Step 7 Set the "DeleteSubject" and "AddOrganizerToSubject" properties in room mailbox calendar to False. This sets the parameters for the meeting to be displayed on the IP Phone.
  For Exchange 2007: a. Set-MailboxCalendarSettings -Identity TelepresenceRoom9 -DeleteSubject $false b. Set-MailboxCalendarSettings -Identity TelepresenceRoom9 -AddOrganizerToSubject $false
  
  

  Thank you

  Paul

• MAPI service

  On myTecra, I get a message saying in Dutch at irregular times:
  Window title:
  Onherstelbare doing beheerde MAPI service
  Text window:
  Five hell

  Translated into English:
  Window title:
  An irreparable error managed MAPI service,
  In the test window
  Unknown error

  Who can tell me what this means? Thank you.

  [email protected]

  Hello
  as far as I know is MAPI "Messaging Application Programming Interface".

  It is a transport protocol for e-mail programs.

  Would it be possible that you are using Microsoft Exchange, Lotus Notes, Sun Internet Mail, Outlook or something else?

  Good bye

• I3 4130 map graphics and Power supply

  Hey guys, I have an i3 4130 with 8 GB of ram,

  http://support.HP.com/us-en/document/c04119419

  Of course, this processor and ram are good for the game, as I have seen online videos of people playing bf4 and crysis 3. I also want to play these games and cs: GB and dirty bomb and dragon age.  I don't really like playing high heat, the middle is fine for me.  I really want to get a r9 x 270 BC, they are in a large part to the best buy right now.  I will also buy a 650W power supply to go with it. My boyfriend is a geek and can install it for me. I took action, and I can fit such a graphics card or the gtx 660, in my case. [cards that are 10 x 4]

  However, I saw in another post that my motherboard has a connector 4-pin. Is this bad? The website says that my motherboard can support up to an i7 uprade!... So why not other new powerful pieces such as a GPU or a power supply.  I get that HP does not have computers for games. Why would they do a motherboard that can run an i7, but not an equally powerful GPU. I get that HP does not have the gaming PC, but those of office. However, it is the PC in my family study, so I'll try to make it work.

  Another way is for ma to get the GTX 750, because this card has a minimum required 300w power supply.

  http://www.Newegg.com/product/product.aspx?item=N82E16814487024

  However, a person in another forum said that HP uses cheap power supplies and will not have enough tension on the 12v rail. is this true?  If this way works, I definitely don't go this way as it is easy... also no need external with this map of power cord. However, if my power supply does not have enough Volts on the 12v rail, so I'll just take the graphics card I want and needed food.

  It's really frustrating me because I played some very old games [rtcw, and] with friends on teamspeak at night and my integrated graphics card could handle, but now they are turning on modern games that I can't play and I reallly want to understand this before you go and spend a lot of money. Thanks for any response.

  Andrew, welcome to the forum.

  andrewmorgan98 wrote:
  

  Hey guys, I have an i3 4130 with 8 GB of ram,

  http://support.HP.com/us-en/document/c04119419

  Of course, this processor and ram are good for the game, as I have seen online videos of people playing bf4 and crysis 3. I also want to play these games and cs: GB and dirty bomb and dragon age.  I don't really like playing high heat, the middle is fine for me.  I really want to get a r9 x 270 BC, they are in a large part to the best buy right now.  I will also buy a 650W power supply to go with it. My boyfriend is a geek and can install it for me. I took action, and I can fit such a graphics card or the gtx 660, in my case. [cards that are 10 x 4]

  However, I saw in another post that my motherboard has a connector 4-pin. Is this bad? The website says that my motherboard can support up to an i7 uprade!... So why not other new powerful pieces such as a GPU or a power supply.  I get that HP does not have computers for games. Why would they do a motherboard that can run an i7, but not an equally powerful GPU. I get that HP does not have the gaming PC, but those of office. However, it is the PC in my family study, so I'll try to make it work.

  Another way is for ma to get the GTX 750, because this card has a minimum required 300w power supply.

  http://www.Newegg.com/product/product.aspx?item=N82E16814487024

  A: I definitely recommend that you try the EVGA GTX 750 Ti.  I read a lot of good things about it.  It does not all the connectors extra power on the power supply.  Regarding the PSU in HP computers is lousy, the fact is that they install the power supply that is compatible with the OEM components.  Even if their computer can be upgraded, they design that enable out of the box.  You can try with the current 300W PSU, but if it does not work, I suggest you buy a power supply at least 500W; 600W would be even better for futute upgrades.

  However, a person in another forum said that HP uses cheap power supplies and will not have enough tension on the 12v rail. is this true?  If this way works, I definitely don't go this way as it is easy... also no need external with this map of power cord. However, if my power supply does not have enough Volts on the 12v rail, so I'll just take the graphics card I want and needed food.

  It's really frustrating me because I played some very old games [rtcw, and] with friends on teamspeak at night and my integrated graphics card could handle, but now they are turning on modern games that I can't play and I reallly want to understand this before you go and spend a lot of money. Thanks for any response.

  You can see my answers to your questions above in orange.  As suggested, the GTX 750 it should work for all the games you mentioned.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Calendar - Exchange

  Hi guys and girls!

  I had my Exchange calendar in calendar of apples for the years applications, but it has recently stopped synchronization events and Exchange. I tried "everything", including by creating a new user account on another Macintosh computer to see if the problem is with my user profile - but it's not. I use the calendar version 8.0 (2092.3) on OS X 10.11.4 (15E65).

  From what I see in the Newspaper CalendarAgent, there seems to be a problem with the analysis of data from the Exchange Web Services. Newspapers, it seems that some calendar events is containing 'incorrect' data or a new attribute not supported by the application of schedule (Type not found in EWSCalendarItemType for IsMeetingPollEvent). My iPhone is still able to synchronize calendar events to and from the same Exchange account without problems. In addition, I can mention that I use Office 365

  Is there any else here who have experienced similar problems or some advice for me how do you know what causes this error?

  2016-03-30 22:18:54, 148 CalendarAgent [273]:-[Analyzer SOAPParser:0x7ffac9c78b80: didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in EWSCalendarItemType for IsMeetingPollEvent (t:IsMeetingPollEvent)

  2016-03-30 22:18:54, 150 CalendarAgent [273]: [com.apple.calendar.store.log.persistent.operation] [CalOperationQueue (x-coredata://6B930445-81D3-4742-9444-9C116007A94D/ExchangePrincipal/p7): CalExchangeSyncFolderItemsOperation: 0x7ffac9dd5520 > failed with the error Domain = CalExchangeErrorDomain Code =-11 "Kalender kan inte uppdatera aktiviteterna I kalendern 'Kalender'. '] [UserInfo = {NSLocalizedDescription = Kalender kan inte uppdatera aktiviteterna I kalendern 'Kalender'., NSLocalizedFailureReason = Ett fel intraffade nar dina changes skulle skickas till Exchange-servers.}.]

  Best regards

  Henrik Back

  Hello

  I can confirm that this seems to be a problem of Office 365 with Mac OS X 10.11/10.10 and the initial work, I did it seems to be a problem of the letters/Exchange user mailbox - it doesn't look like you can set on the client side, it must be done on the side of the Office 365. (Maybe they made some backend changes that broke compatibility with Mac OS X calendar).

  I did a test by removing the user and re-create and reimport all their data, it works but it's a tedious process to link everything, I raised it with our local suppliers of the AU (Telstra) to get them to study and work on that. As a test side I emptied the entire calendar and put in a single event - it breaks then the calendar app so it does not seek to be data/event either, so seems to be more user/mailbox linked.

  Philippe

• ProBook 4520 s - exchange of the wireless network card

  Hello everyone.

  I think the exchange of the wireless network card in my Probook 4520 s, due to the low flow.
  So I searched for a while a 5 Ghz supporting the card and found out that I am only able to get in the "white" cards list working. Then I looked at this page:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c02487851 & jumpi...

  These cards can be any, that have been used in 4520 s. Mine (according to the Device Manager) is the Broadcom 4313 802.11b/g/n. This thing only supports 2.4 Ghz. Now, I looked at the list for a 5 Ghz supporting the card. I think that the 802.11A/B/G/N WLAN Intel HMC 572520-001 minicards can operate on 5 Ghz, because I read, that A appears only with maps of 2.4/5 Ghz. I read too, that maps of 2.4 / 5 GHz have 3 antennas, but on this card I only the slots for 2. Is this good? And this card would go into my 4520 s?

  Greetings,

  Colony

  Hi, colony:

  You are right about your statement about the cards being described as A/B/G/N dual-band.

  The best thing to do is look at Chapter 3 of your service manual.

  You can only order one of the cards listed as supported and it MUST have the HP reference on it or it won't work.

  I see only two possibilities for you...

  The 6200 Intel and Broadcom 4322.  Make sure you also get the part # that corresponds to what country you live.

  If your current Broadcom card has integrated Bluetooth, you will lose your Bluetooth capability if you order an integrated HP bluetooth module and probably the cable too.

  None of the dual-band cards have embedded bluetooth.

  Link to the service manual.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02439213/c02439213.PDF

  Then, you can order a card on the link below.

  If you do not live in the United States, you can change your country at the top of the page to yours.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6857BCBBC4CD4470B9282F130A563697

  Paul

• Card problem NETWORK M30, exchange of memory + HDD replacement

  Hello
  The first problem is with the network card in my laptop. It seems to work OK in windows (it looks fine in Device Manager, I can change settings etc) but it doesn't recognize any cable. I must say that I have enough experience on the networks. I tested the two straight through and crossing of the cables that work in other systems. I connected to a switch with a straight through cable, but don't see the network card. No. led flashes on the card (before he did)... nothing. It says "disconnected network cable" on the status bar. If I use a usb instead, with the same parameters and cable network card, everything is I checked the card using a cd live linux. It can identify the map, but I can't ping it and of course it is not regognise no cable.
  I'm 99% sure that it's a hardware problem. It is covered by the limited warranty of 2 years, right? The main question is: is the card integrated on motherboard of the laptop? Should I change motherboard too, in order to correct the network card?

  The second "problem" is a memory module. I checked with utility of a toshiba who said that the ram is faulty. Toshiba service sent me information for the Exchange since 09.11.2004 with the State shown above:
  Current status - Description
  Announcement - gathered information on the unit and the customer and the service center was informed. The unit did not here yet.

  Can someone help me with this? I'm looking for when the module will be available? I can't be based on a faulty ram memory!

  And one last question. I would like to change my hard drive for a faster. I can change it myself or it will cause a problem with the warranty?

  Thank you for your time.

  Hi sub,.

  You're right about the guarantee. Your machine is trembling warranty of 2 years. If the network card is faulty it can not be changed separately. You need to change the motherboard. Be careful with warranty. Do not change the only hardware components. You can lose it.

  In your case, there are a few hardware problems. In my opinion the best way is to contact the after-sales Service of Toshiba partner. Visit this link
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
  Good bye

• Toshiba 32BV702B - supports 1:1 pixel mapping

  It does support this feature? If so, how.

  I'm sure he does, I studied the topic at some length before you buy it, but it seems to be a pretty elusive feature.
  Some say that when running on a pc, there must be some resolution with a certain refresh rate, and then the option is available.

  Please advise, I asked support support too.

  What do you mean by pixel mapping?
  How does this function?

• Customers and the Microsoft exchange 2003 Server

  I have a Microsoft exchange Server 2003 with 5 clients. whenever I join a new computer to the domain the n the new computer will see existing mapping all drives but cannot see the field and the other computers but other computers can see the new computer in the network. What can I do to be able to see my new client station network? Firewall window is also off. Thank you.

  I suggest that ask you in one of these Microsoft forums:

  Forums of previous Versions of Exchange .

  Thank you.

• HP Jet 13-c002dx: the maximum size of the map of adapters support

  I'm sorry to repeat a question already asked the existing question was marked as "resolved", but has not answered the question.

  The question was: what is the maximum size of the microSD, supported by this device? The answer, in so many words, was, 'well, it really works with the adapters of 64 GB card. I have not tested with the 128 GB card, so I don't know. »

  The original question still received no reply, which was what is the maximum size supported. What is 64 GB? Or is this 128 GB? (And the limitations of size due to hardware, software, or both together? Format SDXC UHS-1 the so-called supports more 128 GB, even if perhaps not for micro size?)

  Best Buy could not find this information. I was not able to find a certain answer online either.

  I bought a map of UHS - 1 128 GB adapters and don't want to remove the package unless I know WITH CERTAINTY that the device will support it. Otherwise I'll lose $80 + $. At the moment, with her, sealed in the package, I can always take back and exchange it for a smaller card.

  Thanks for your help.

  I just, I couldn't believe that this little piece of information that is important has not been printed in the user's Guide. Worse still, no one seems to know the answer - not the Geek Squad at Best Buy (for which I pay), not here on the forum or in the HP Solutions guide. Finally, I appealed to someone higher in the chain (I won't say how, because I don't want their flooded of calls!), because it really was an oversight in the User Guide. Less than an hour, I received a phone call and was corrected thanks to a support person.

  Thank you, HP! I think that they won't really the extra mile to help me solve this problem.

  Therefore, the maximum size that this HP 13-c002dx stream will support 64 GB. I took the card of 128 GB unopened back to Best Buy today and I bought the 64 GB.

  (Advice to people looking for a computer/phone/Tablet Accessories: do your homework before shopping at Best Buy.) They will tell you anything to make the sale.)

• All user accounts Windows XPrestricted open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder

  Hello

  you have a problem with my Windows laptop that left me speechless.

  I would really appreciate if someone could provide a solution or any ideas where to start fixing this, as I get close to return to the previous backup full system, but reluctant to do so as I have never done it before so I'm worried if it really works as supposed (Macrium and Ping).

  1. description of the problem

  All users of Windows XP (SP3) restricted accounts open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder, including My Documents.

  However, all accounts administrator work as before and also user accounts work like so usual, they are included in the Administrators group, with respect to the clicks of the workstation and records.

  In addition, the correct icons for 'Drive' and 'Record' are visible when connected as long as administrator but lacking when logged as long as user restricted when you check the file associations by "open the folder and then click on Folder Options in the Tools menu.» Click the registry file types list. »

  2 solution unsuccessful attempts

  2. google and tried the solution to manually change the registry entries from Microsoft: http://support.microsoft.com/kb/321186

  "
  Start the editor of the register (Regedt32.exe).
  Look for, and then click the default value under the following registry keys if this problem occurs with folders:
  HKEY_CLASSES_ROOT\Directory\shell
  If this problem occurs with drives:
  HKEY_CLASSES_ROOT\Drive\shell
  Click on edit in the Edit menu.
  Type 0 in the value data box, and then click OK.
  Exit the registry editor.
  "

  (Fixit associated meanings has also not working for some reason, says that the Windows Installer does not run, don't know if the same problem...)

  2B. and then also tried the fix "regsvr32 /i shell32.dll" at http://blog.chron.com/helpline/2005/10/double-click-opens-search-instead-of-folder/.

  After these steps, the registry under "Drive" and "Directory" information are as attaché at the end read somewhere there should be a "find" under lock and key, as I have, but don't know if the subkeys under 'Search' are what causes weird behavior.

  If anyone knows and could provide what the values for the registry values must be in a system that works, would be nice to compare to possible problems.

  Unsuccessfully, with what precedes, to solve the problem, but noticed through that:

  2 c. When you are logged in as administrator, I am able to see and modify the registry keys concerned with regedit, considering that when logged in as a regular user, I get an error that translates roughly as "the key could not be opened [consultation]?.» Error in opening the key. "for"Default icon"and subkeys 'shell' to 'Drive' and some subkeys under"shellex ".

  Oddly enough, this is also the case even if I "Run with" regedit as a user belonging to the Administrators group when logged in as a limited user.  Could be the mechanism of Windows registry access.

  Noticed that the small group 'Users' did not have access to "Drive". Grant read access, even as the "directory" and other registry keys next to them, for "users".

  Now see the values of registry as a limited user, but the problem persists. Do you really know what to try next, after spending hours Googling for answers.

  3 computer laptop environment and other factors

  3. don't know if it's related, but perhaps that coincides the time and the possible reason of sage:

  I had the problem two days ago described in "account Administor doesn't have access to some files and registry entries" to http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_27415496.html.

  Zone alarm free firewall prevented changing the key of HKLM\SOFTWARE\Microdsoft\Windows\CurrentVersion\Run.

  Which was fixed as in the article above tweaking of Zonealarm settings so that changes are allowed.

  3. the environment of the laptop:

  Acer Travelmate 8204 laptop

  Windows XP SP3 with virtually all updates of installed Microsoft.

  Recent issues (related?) with the .NET Framework 4 updates and the repair facility. FixIt against MS to install MS Update and the Application works and reveals no problems, but the settings from-> Panel-> Add or Remove Applications said that it cannot change or delete NET Framework 4.

  ZoneAlarm Free Firewall version: 11.0.000.057, prevented possible culprit get earlier access to the registry, uninstall?

  Norton Antivirus version recently installed 20.3.1.22, possibly in conflict with ZA or bug?

  content 'Repertoire' 3 c registry key.

  HKEY_CLASSES_ROOT\Directory]
  "AlwaysShowExt"=""
  "EditFlags" = hex: d2, 01, 00, 00
  "ToolTip"="prop: DocComments.
  @=""

  [HKEY_CLASSES_ROOT\Directory\Background]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\ACE]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]
  @= "{D969A300-E7FF-11d0-A93B-00A0C90F2719}".

  [HKEY_CLASSES_ROOT\Directory\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 33, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Directory\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Directory\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Directory\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Directory\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EDSshellExt]
  @= "{29FF7AB0-BE34-4992-A30B-53A9D86EE239}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EncryptionMenu]
  @= "{A470F8CF-A1E8-4f65-8335-227475AA5C46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\IObit Malware Fighter]

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Washer]
  @= "{6EE51AA0-77A0-11D7-B4E1-000347126E46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\CDF]
  @= "{67EA19A0-CCEF-11d0-8024-00C04FD75D13}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\FileSystem]
  @= "{217FC9C0-3AEA-1069-A2DB-08002B30309D}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Monitor]
  @= "{7842554E-6BED-11D2-8CDB-B05550C10000}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\MyDocuments]
  @= "{ECF03A33-103D-11d2-854D-006008059367}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Nokia]
  @= "{416651E4-9C3C-11D9-8BDE-F66BAD1E3F3A}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Sharing]
  @= "{40dd6e20-7c17-11ce-a804-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\UltimateZip DragDropHandler]
  @= "{2F860D82-AF3C-11D4-BDB3-00E0987D8540}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {ef43ecfe-2ab9-4632-bf21-58909dd177f0}]
  @=""

  3D 'Drive' content registry key.

  [HKEY_CLASSES_ROOT\Drive]
  @= "Asema.
  "BrowserFlags" = dword:00000008
  "EditFlags" = d dword:000001 2

  [HKEY_CLASSES_ROOT\Drive\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 38, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Drive\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Drive\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Drive\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Drive\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\CWDDriveMenuHandler]
  @= "{CCEFA845-DCDB-4A2F-8BED-DBE87CD198EC}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\GizmoShellMenuExt]
  @= "{AF859436-B9BD-4154-B594-2B8D1F4295A6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Glary utility]
  @= "{72923739-5A47-40A3-9895-25AF0DFBB9E4}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\LavasoftShellExt]
  @= "{DCE027F7-16A4-4BEE-9BE7-74F80EE3738F}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ReflectShellExt]
  @= "{DEBB9B79-B3DD-47F4-9E5C-EA6975BAB611}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\SDContextExt]
  @= "{70F8E90E-353A-47AB-B297-C576345EE693}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Symantec.Norton.Antivirus.IEContextMenu]
  @= "{FAD61B3D-699D-49B2-BE16-7F82CB4C59CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {59099400-57-11CE - BD94-]

  0020AF85B590}]

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {D6791A63-E7E2-4fee-BF52-5DED8E86E9B8}]
  @= "Menu of portable devices.

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions]

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""
  "DriveMask" = dword:00000020

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ShellExt]
  @= "{0B0D0025-9D78-43BF-84EF-6F308AC4D0CE}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {B 7988, 573 - EC89 - 11cf - 9 c 00-

  00AA00A14F56}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  It seems that I managed to solve the problem on my own. Did two things:

  1 set the registry keys determine programs associated objects 'Répertoire', 'Drive' and 'File' to the default values by using the settings found here: http://www.dougknox.com/xp/file_assoc.htm

  HKEY_CLASSES_ROOT\Directory\
  HKEY_CLASSES_ROOT\Drive\
  HKEY_CLASSES_ROOT\Folder\

  2. If you want to have permissions for group 'Users' to read all these keys in the registry. For some reason any access worked only partly for standard users.

  Not sure who finally solved this problem, but after I had finished 1. and 2. for the purpose of 'Record', by clicking on 'My computer' and any folder works normally for all users of the computer.

  I suspect that some recent installation of program which adds actions associated with these objects messed up the registry. Suspects are Norton Antivirus and dbPowerAmp.

  Thanks for the suggestions for this problem!