VCAC 6 can't see vSphere computing resources in my group of fabric

Similar Questions

• Can't see 2nd computer cannot join the group home

  I'm putting in place the home between my PC & my laptop group. I do work very well when my laptop is connected to my router, but when I go nothing wireless.

  The OP gave me full access to its machines and I have deleted/recreated homegroup, but neither machine was able to detect, no matter to what end I started. Networking has worked and homegroup troubleshooting went to the test but could not solve the problem. Given that the OP has a good knowledge of creation and access to shares, he now uses this mechanism.

• Can't see another computer for file sharing

  Hello
  I have 2 computers in my house, a PC running Windows 7 Home Premium x 64 and the other a XP Home Edition SP3 race, both connected to the Internet through a router TL-MR3420 and the adapter TP-LINK TL-WN822N. I have enabled the sharing of files on both computers and have no problem to display all of the files shared between each computer, so far.
  Whenever I try to view another computer via "Network" or "homegroup" menu on 7 (or my network places on XP), I can't see my other computer which is supposed to be there. So far, I've tried a few attempts to analyze and resolve:
  1 ping each other by IP - success.
  2 ping each other by the name of the computer - has failed.
  3. try to access to "- and " run - failed with error 0 x 80070035 - path not found network. ".
  4 run diagnose step above on Windows 7, she returned with a result: "the device or resource (my static IP XP) is not configured to accept connections on port 'The file sharing and printers (SMB)'."
  5 turn off the firewall on the computers and router.
  6. ensure that necessary services for file sharing are active.
  7. the reactivation of the wireless connection on both computers.
  8 change the name of the Working Group on both computers.
  9. run ipconfig/all on both computers.
  10 install this fix on my XP.
  Ipconfig, it seems my two computers showing the active DHCP on 'no', so I changed my network settings to "obtain an IP automatically" she turns to the 'yes' later. And "NetBIOS over TCP/IP", showing the different statutes on 7 that it is activated on XP it is disabled, even though I put it activated via the WINS tab on the XP network settings. Still do not solve the problem.
  I don't know if it means something, but I share also some folders on my 7 to my Tablet ES File Explorer app, it works as it should (as long as I use static IP address), but if I try to connect my tablet to shared folders on XP, it always shows error message on either:
  WiFi is turned off (it is)
  SMB server is out of reach of the network
  The ip address is not valid
  Blocked by the firewall
  SMB service is disabled
  I guess that Wifi, IP and firewall are not the problem, and I don't know about SMB, it's stands for Samba / file Printer Sharing? He has already checked on computer network settings.
  Any help would be greatly appreciated. Thank you.

  I solved this.

  I opened my XP, run these commands via cmd:
  netsh int ip reset resetlog.txt

  netsh winsock reset
  Restart the computer and then change my connection of cable wireless lan then back to wireless again.

• Can't see the computer network

  I have two computers running Windows 7 Home Premium 64 bit on my home network. In Windows Explorer under network, n ° 1 sees itself and n ° 2, but no. 2 can't see himself, i.e. cannot see no. 1.  Both can access the internet. The printer is connected to the N1 by USB (we had a lot of trouble at first with Wi - Fi so use cable for this).

  There is no RESIDENTIAL group because I understand there are IPv6 and our router does not support that. I tried the homegroup, but no. 2 could not yet see no. 1. We operate a wireless G network.

  On the computers on that network discovery is and file sharing and printer are on. Protected by password sharing is disabled.

  I saw some comments which may help to a registry cleaning. Could this be true?

  What Miss me? It left me speechless.

  Thanks for your help.
  G

  It's fixed!

  I found another thread in that says something about the zone of confidence in their firewall. I went and looked and BINGO! The name of the area was very different in the name of the wireless network. Now it's the same thing and I have reset certain actions and we are connected.

  Yay! I thank very you much for all your hard work with this in mind.

  Moreover, there is no element of network connections in the control panel in computers. Is that how it should be?

  Graham

• Can't see vSphere objects

  After the installation of LCM 1.0.2 I save the items in the inventory (model data warehouses, etcc...) and there is nothing there. I do not see again for a heirarichal for vSphere 4.0 structure. The selection pane is empty. I can use vCO client and navigate to the object in the view of the inventory without problem.

  Any thoughts?

  To use LCM with vSphere, you must save your vCenter with VMware Infrastructure 3.5 plugin, not the 4.0 plugin. When you do this, unsubscribe your vCenter 4.0 plugin so that you aren't caching the same server under 2 different plugins.

• My guest can not see the host or cannot communicate with the network, networking is set to bridged, host operating system is Windows XP sp3

  Hello from Spain,

  I am running vmware workstation 6.0.2 on a windows xp sp3 with two virtual machines, a xp and a windows 2003 Enterprise edition. Non of my guests can't see the computer host or other computers on the LAN and host when I click on show "Entire network", "Microsoft Windows network" I see that the domain for which the guests but not the domain controller when I double click the icon of the domain. Networking is set to connected by a bridge to the NETWORK adapter connected to the LAN.

  Thank you.

  Hello

  No message in the post

  route print at the command prompt to the host and the guest and send report

  Prakash

• Can't see resource calculate in the vRA, even if the vSphere Agent log shows a cluster

  I'm debating on the issue of whether the question should be minimal vRA installation requires anonymous authentication in IIS?  Or am I crazy?  I let you choose how to respond.

  This is a new installation of minimal vRA 6.2.1 new identity applice, vRA device and a single server Win2012R2 for all roles of IaaS. Gentle and the pre - req check tool was happy before you install it.

  However, when I went to add an endpoint yesterday for the vSphere Agent, I installed, I get the following error in the logs of vRA:

  Exception occurred retrieving the work of VRM: request the HTTP is unauthorized with client authentication scheme 'Anonymous '. The server received authentication header was 'NTLM, Negotiate. " Inner exception: the remote server returned an error: (401) unauthorized.

  A minimal installation uses anonymous authentication?  The pre - req just had check tool has that disable and use Windows authentication with the suppliers of the following order: NTLM, Negotiate.  Hmmm..., well although perhaps I'll activate anonymous and restart the agent of vSphere and see what happens.  I restart the agent and now I only get an error on the authentication and the following of the vSphereAgent.log seems to say that the endpoint is communication and a cluster of back of the vCenter:

  [03/31/2015 10:22:08] [Debug]: Thread-Id: 10 - Ping sent successfully: [<? xml version = "1.0" encoding = "utf-16"? > < pingReport = "vSphereAgent-XXXXXX" CurrentVersion "6.2.0.0" = Nom_agent agentLocation = "VRAIaaSServer01" WorkitemsProcessed = "0" > < Endpoint externalReferenceId = "F86349A2-B8D7-4E17-9599-CC4F5C9E94B3" / > < nodes > < node = "ClusterName" type name = 'Cluster' identity="XXXXXX.mydomain.com/vCenter 5.5 Test/host/NOMCLUSTER" datacenterExternalReferenceId = "data center-21" isCluster = "True" managementEndpointId = "72195415-bdb6-4f7a-a3ac-92b9c4eca960" / > < / nodes > < AgentTypes > < AgentType name = "Hypervisor" / > < AgentType name = "vSphereHypervisor" / > < / AgentTypes > < / pingReport >]

  [03/31/2015 10:22:08] [Debug]: Thread-Id: 10 - Ping completed report

  However, when I navigate to compute resources under endpoint, vRA shows no clumps.

  What happens one? I'm going crazy?   Well, maybe, but actually part of the problem is that calculation of resources are not displayed when you think, until you go to groups - fabric groups and then check the clusters that you would like to use vRA.  Now when you navigate to calculate the select cluster resources will appear.  {shakes head and face Palm}

  The lesson is, so don't forget the section group of fabric with the addition or subtraction of compute resources.  In addition, it is perhaps orphan computing resources in the database.  The following KB may help solve this problem.  VMware KB: deletion of an endpoint in vRealize Automation fails with the error: the endpoint is used by comput #...

  Hope this helps some that can run into questions adding vCenter endpoint computing resources.

  Hey Sean,

  OK on one of my IIS servers

  At the level of the server host level anonymous authentication is the SSO is enabled

  Move forward in websites - Site by default - Windows authentication is the only thing allowed

  For the repository - anonymous and authentication Windows are enabled

  for the vcac - forms authentication is the only permit

  For the WAPI - anonymous and Windows authentication are enabled

  Who help me?

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I continue to receive reports of Norton that a download with the pre RadioWMPCoreGecko fix. followed by various suffixes like "19.dll" or 05, 06 08 etc... takes a lot of computer resources. Can you explain what it is, as I understand it, it is called by F

  I continue to receive Norton Security reports that a download with the pre RadioWMPCoreGecko fix. followed by various suffixes like dll '19.dll' or 05.Marco, 06 08 etc... takes a lot of computer resources. Can you explain what it is, as I understand it, it is called by Firefox.

  This DLL can be part of a Firefox extension.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Satellite A200-12 x PSAECE: can't see the STRANGE in my computer

  Hi all

  After using my toshiba recovery cd, I lose the CD/DVD-ROM drive, what's wrong?
  The laptop works fine, except that on this issue, I can't see the drive on my computer and equipment, and if I press the eject button I have no answer to the reader, even the amber does ' t see the light.

  I have Toshiba A200-12 x PSAEC (PSAECE) with Windows Vista 32 bit.

  Hope someone can help me please!

  Thank you

  Hello

  I think that Akuma means remove the STRANGE of the Bay of notebooks, then plug it in again.

  In any case, in my opinion you should first check if the reader of CD/DVD (ODD) was recognized in the BIOS, and maybe you can also try to boot from the CD/DVD drive to check the functionality.

  If it will work, the connection is ok.

  In this case, I would recommend removal of the upper and lower registry filters.

  Check the MS doc for more details:
  http://support.Microsoft.com/kb/270008/en-us

  Good luck

• Satellite M50-182: control computer hardware - can't see CPU temp

  Hello

  I have the Satellite M50-182.

  I installed the computer Hardware Control 1.10 Beta 02.

  I can't see my CPU Temp.

  Can someone help me.

  Thank you

  I do not know the program you are describing, but you might want to download the latest free version of the analytical tool of Everest Home Edition to OldVersion.com

  When you run it look under computer/sensor. It will show you your time CPU and then you will at least know if the program or the sensor that is not working properly.

• How can I see/display of the internal usb devices installed on the computer in my computer?

  I can't see the drive letters removable usb in my computer.  However, the removable usb drive letters are visible in disk management.  What can I do to display the letters of removable usb drive in my computer screen?

  Hello

  1. are you not able to see the readers or only the drive letters?

  2 corresponds to the letter displayed when the USB is connected

  I suggest that you try to rename the drive and check if it helps.

  I also suggest that you follow these steps and check if it works

  a. open the location of the computer and click organize.
  b. now, select folder and search options and click on the view tab in any drive
  c. now select the option "show readers, files and hidden folders. Click Ok

  I suggest that you send a screenshot of the screen that you refer to help you better.

  Use capture tool to capture screenshots

  http://Windows.Microsoft.com/en-us/Windows7/use-Snipping-Tool-to-capture-screen-shots

  See the link below to find out how to post screenshots or other photos in the forum discussions.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• C: drive turned into raw and now I can't see file display options etc on my computer.

  Original title: instability of the system.

  I have xp s3. I had trouble with my main drive lately. Previously, I had my shot raw c drive and I can either logon in safe mode. I used checkdisk by my slave hard drive someone to another disk and it comes back with a few interface problems. Yet once the obtained c drive turned into raw and now I can't see file display options etc on my computer. I tried to use to start the system restore but not its use before and now. I have avira for antivirus and Registry Mechanic only. Is there a way I can fix my windows without formatting evrything?

  Hi Windflash,

  I had a similar problem also and it turns out that the hard drive is dead. You can probably do is to connect the hard drive to a working another computer & use data recovery tools to recover files from it but usability will always be a question.

  Data recovery is an another stressful job as for me it took 3 days to recover data to a 500 GB drive.

  After which I tried to format it own it but has not as well so I poured the reader.

  You can try my snack suggestions if your drive starts to work again I strictly recommend you to use it as a primary drive.

  Let me know if it helps.

  [If this post was helpful, please click "Yes" under "Was this helpful option?". If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• in my home network xp laptop in 'My network places' can't see the two other vista computers portable altought they can see computer laptop xp

  in my computer laptop network xp home in my network places can not see the two other vista computers portable altought they can see xp laptop computer and access this computer laptop xp shared docs, laptops 2 vista can see eachother so working group name is on all computers the same portable 3, all are connected etc. What can I do to see the portable 2 on my computer vista laptop xp

  Hi wiking17,
   
  Follow the suggestion given in the article below to resolve this issue:
   
  You can't see the other computers in the workgroup on the network on a Windows XP-based computer
   
  Additional reference on:
   
  Troubleshooting of network domestic

• I installed a second hard drive and unpartittion after, now I can't see even if the computer is recognized.

  After I installed a second hard drive as a slave, he was installed susefully. I formatted but it was partittion. I don't like partittion hd, I unpartition it through computer management and management system and it worked. now, I don't see when I open the computer icon when I check the bios is there when I check through management system is there when I have trouble shooter from there he says works fine, but I can't see through the computer icon it shows not everything, but the second hd.

  How can I put the secondary hd icon in the main icon of the computer?

  Mr. GordonBP

  Thank you very much, it worked. you were right and I learned a lesson more.

  Yes, your answer was very helpful.