Can't sleep or stop working after replacing HD

Similar Questions

• Audition 2.0 has stopped working after replacing my hard drive. How to fix or get new serial number?

  I used Audition 2.0. After the hard drive of my PC broke and was replaced, and all the data re-installed, hearing would not start: I received a message that says "the software has already been installed on another computer and would not work. I followed the instructions on-screen to generate a new serial number, but the site was no longer supported so I was unable to get a new serial number. Consultant Adobe told me to uninstall and reinstall, I tried, but hearing could not be reinstalled. I got a message saying that my serial number was not a true SB.

  Can someone help me?

  Double post

  The Adobe Audition 2.0 Setup program does not recognize the original serial number

• CS6 license has stopped working after replacement of default motherboard

  We have worked with CS6 on Windows 10 pro. Motherboard died and was replaced by the manufacturer. After changing to the new motherboard while all other components of the computer (CPU, hard drive, etc.), CS6 went to trial. I need to activate the CS6 found on the new motherboard. How should I proceed?

  Contact Adobe technical support via chat and ask them to reset your activations.  Then activate the trial using your serial number.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• OfficeJet 6310 tricolor cartridge (93/95) stops working after replacing the cartridge of black and white (92)

  OfficeJet 6310.  Brand new problem.  This morning my 92 black (right) went dry and as soon as I replaced it the printer said my tricolor is bad.  With the 95 the printer now shows "left cartridge needs to be replaced" and with the 93 the printer now shows "cartridge not intended for this printer."  There is no point at all.  Restarting, cleaning the contacts and heads, nothing seems to work. The cartridges are HP OEM fresh out of the blister, no refills.  I used the 93 both cartridges lights 95 alongside 92 black for a few years.  Foreigners have infected my printer.  Anyone have any ideas?  Someone two days ago posted basically the same problem with their so 5740 printer.

  Message edited by Frustration1029 on 12/09/2009 07:48

  1. remove all the cartridges and turn the printer off

  2 unplug the printer and wait a minute

  3 press and hold the # and 9 while plugging in the power cord from back in.

  4. wait a few seconds, and then press the power button.

  5. the display should read 'Full Reset to Null'

  6 only install the color cartridge.  Close the cover

  7. wait for the machine to ask for black cartridge, then open the cover and install black cartridge.

  8. close the lid

  9 alignment page be printed automatically.

• Portege Z10t-a - intermittiently touchpad stops working after mode 'sleep'

  Hello

  I have a protected Z10A and the touchpad and keyboard intermittiently stops working after the mode 'sleep'. I can't wake up, or restart without re-booting.

  I did the update to the keyboard firmware docker as advised in a thread on January 2014, but this did not help the problem.
  This computer is 2 weeks.

  I was download site and updated all the drivers and updates.
  The computer works perfectly except for this problem.

  When the Tablet is in standby, the white led flashes, and it is when everything works fine, but if the light for some reason any does not Flash but still turned on, then it will not start and I have to restart the tablet.

  I have disabled hibernation in the options mode, but still no help.

  Any help would be appreciated.
  Thank you
  mm

  Hello

  I m wondering if the option (in BIOS) called Wake-Up on the keyboard is turned on.
  To restore the functioning of the computer from sleep mode, press the power button or any key on the dock of the keyboard for a short period of time. But the keys on the keyboard can be used if the option is enabled.

  Note: when the laptop is in Sleep Mode, the power indicator of will blink white. If the light flashes white, the computer laptop isn t set mode sleep!

• Touchpad gestures stop working after sleep Windows *.

  This is the best advice ever! I tried and immediately was saved! Thank you!!

  For laptops Asus on Windows 8 - actions no longer work after sleep on touchpad
  

  
  

  Manual method

  • Open the Task Manager, look for the "Asus Smart gesture Center" process Complete the task.

  Script method

  • Script: Create a .bat somewhere file with the following code:
    Taskkill /IM AsusTPCenter.exe /F

  When you run the bat file, it will kill the process.

  Both: when to end the task, that it seems that the other process from Asus running it will detect it and start it, allowing the multi-doigt touch again.

  To make the batch file:

  1. Open Notepad and copy/past this command:Taskkill /IM AsusTPCenter.exe /F
  2. Then click on save as and type .bat (remove .txt)
  3. Replace all files . the drop-down list and click Save

  That's all! Whenever the problem appears, double-click the file and it will fix it!

  Thanks to Teknokraten @ superuser.com for this solution.

  I am so grateful for your help! I had the same problem that my touchpad stop working after the mode 'sleep'. I had the problem over the years and no one could help me. And it worked! So thank you very much!

• iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

  Axiomer wrote:

  New speaker of iFixit.

  It is a problem.

  iPhones are not serviceable by the user.

  You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

• My mouse stops working after 30 minutes of inactivity. How can I fix this without having to reboot my PC?

  original title: MY MOUSE STOPS WORKING AFTER PC IS IDEAL for 30 minutes. How can I fix this without having to reboot my pc

  I hang the mouse up to the wrong computer

  Suggestions:

  1. If you use a wireless mouse, check the battery.

  2. use a different mouse and see if you have the same problem in the SAME conditions (idle for 30 minutes). If you have not, then your mouse may be defective.

• My CD/DVGW device stop working after iTunes was installed with Apple records.

  My CD/DVGW stop working after you install the program iTunes with Apple records. The letter (e) are attributed to him does not appear in computer (Windows Vista Home Premium), as it was before. Every time the PC is switched on or reboot, a message from Apple saying "AppleSyncNotifier.exe point of entry is not found. The procedure entry point sqlite3_prepare_v2 could not be found in the dynamic library SQLite3.dll. "The HP device proves that this CDROM works. iTunes has been removed, but the apple files are still there. Driver Detective advised to remove the filters from the registry. Only the filters 'less' appeared and has been deleted. This does not solve the problem. Should I delete all Apple records that have been installed with iTunes? This will damage other programs?  Reinstall the driver for this device does not resolve the problem.  !  yellow sign keeps appearing in the parity for this device handler. Systen restore does not a remote date just to put it as he was back. Can someone help, please?

  Hello

  Having too many competing programs from loading at startup CD/DVD can cause these problems.

  Deleted? Or did you correctly uninstall iTunes? Check with iTunes support for complete hair removal methods.

  ---------------------------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Arc keyboard stops working after a few minutes of inactivity

  The arc keyboard stops working after about 10-30 min to be idle. I can unplug/plug usb receiver or take out / replace batteries and still doesn't work. I have to restart the computer to make it work again. Any ideas?

  Thank you

  Hello

  Please update us with this information.

  I suggest you to update your computer with the latest version of the Microsoft IntelliType Pro for your keyboard and check if that helps.

  Keyboard Microsoft IntelliType Pro 8.2 for Windows - 32 bit software

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26949

  Keyboard Microsoft IntelliType Pro 8.2 for Windows - 64 bit software

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26950

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Re: Satellite A80-135 - during recovery, that it stops working after 10 minutes

  After trying to reinstall Windows from original restore DVD my A80 stop working after 10 minutes of this.

  I tried again several times and the problem is the same. Cannot complete the installation, because is shut down every time after 10 minutes or more.

  Do you have any ideea why this phenomenon happens?
  Thank you!

  Hello

  You should check if the same issue occurs with another disc maybe you could try to reinstall the OS by using the original CD of Microsoft Windows.

  If installation still decomposes at the same point and time then this could be related to a recovery disk scratched.
  On the other hand the laptop could shuts down due to hardware problem.
  As mentioned by Luke, the internal HARD disk bad might work too.

  Overheating could be another reason why the laptop is off.
  Maybe don t cooling modules work as it should and puts it in internal temperature high power off the laptop.

  But these are that some suggestions so it would be really interesting to know if you can reinstall the OS using another disc

• The mouse stops working after a few minutes

  Original title: my USB mouse ch

  My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?

  Hi Ann Juel,

  1. what happens when you connect the USB mouse to the computer? You get the error message?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. What is the operating system installed on the computer?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can connect the mouse to another computer and check. Also perform the methods provided.

  Also, try a different USB port and check.

  Method 2:

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Response with status so that we can help you.