Can take only 1 or 2 Radio channels?

Similar Questions

• Windows 7 64 bit, asus motherboard that can take 32 gigabytes of ram, windows only see 16

  Windows 7 home 64-bit

  ASUS maximus formula v

  32 GB of ram motherboard that can take

  Windows only using 16?

  Intel 3rd gen I5 3570

  Intel SSD 120

  WD velisaraptor 150

  Upgrading Windows 8 will be Windows 8 Pro, so will support no doubt at least 192 GB. You could wait for that and pay only $39.99.

  http://windowsteamblog.com/Windows/b/bloggingwindows/archive/2012/07/02/upgrade-to-Windows-8-Pro-for-39-99.aspx

• Primary WRT1900AC & comments networks on the same Radio channel

  Hi - Newbie here.

  The main network and the network of comments on my WRT1900AC occupy the same 2.4 GHz radio channel, regardless of the selection of a channel or using AUTOMATIC channel selection.  I want to change this scenario so that the primary network would occupy a channel (say, Ch. 11) and the guest network would occupy a different channel (say, Ch. 1).  I fell in my attempts.

  Change channel from the main network (for example, Ch. 11-Chapter 6) goes well, as checked the WiFi Analyzer application on a separate shelf.  For each network channels remain separated (Pri @ Ch. 6 & Guest @ Ch. 11) for about 2 seconds, then the guest network dutifully follows the Canal of the primary school where the two, then, reside (Pri & comments @ Ch. 6).  This second 2 delay leads me to believe that the two networks can be separated with success and coexist on two different channels, but only if the adjustment is made.

  I use the latest update of Firmware (Version 1.1.8.161917), and almost everything works perfectly.  I haven't checked for a situation similar to the 5 GHz band, but imagine that a cure for 2.4 GHz could be translated to a 5 GHz problem if it exists.

  Please do not hesitate to me flood with your knowledge.  Thanks in advance.

  Did a live chat with an environment of "agent" tonight, and, after some initial stumbles and a bit of the discussion on the issue, the agent said that "it's like that" and that the user doesn't have the ability to change the channel for feedback network.  Only I could answer that, unfortunately, Yes, the user makes, but in order to change the channel of Guest network, you had to change the channel of primary network.

  So, for now, 'that's it!

  Guess I'll have to wait for firmware open stable source to be released so that I can flash and dig a little deeper into the router.  Until then, I'll just scratching my head about the counterintuitive to have practice two networks on a radio band occupy the same channel, possibly generating interference of the internetwork.

  Thanks FurryNutz for your patience and your help.

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• HP ENVY M6 1310sa: what is the maximum RAM can take a 1310sa?

  According to the title: what is the maximum RAM can take a 1310sa?

  If you have indeed the m6-1310sa laptop, then 19 GB installed as a pair of modules of 8 GB will bring in 16 GB memory. Also what says the manual.

  Unless you like surprises (no boot), only to install an identical pair of guaranteed compatible memory from a memory well known manufacturer modules. (Kingston, Crucial, Corsair and al.) Do not mix strips memory of different capabilities, configuration or manufacturers. Remove the original strips and replace them with upgrade modules.

• I have attached a few photos taken in Ireland, you can take a peek

  Thanks to all who helped me with my problems of lens. I got the Peterson, book and read it carefully. I enclose a photo taken in Ireland last year. Can take you a look? Used my 5DM 3 with lens EF 24-105mm 1.5.

  OK, now I understand you are looking for criticism...

  To my way of thinking, there are two or three parts of how I criticize.  Additionally, when you ask for criticism on the public forum, expect honesty (nobody would do you any favorite if they were dishonest in the hope of not to hurt feelings).  Then promise to melt.

  If an image is entered in a contest, the judges would not necessarily time to properly evaluate each image.  They are looking for 'timeout value.  Here's what that means: imagine you're flicking your way through a magazine... looking at the picture after after.  They are all "nice"... but then you come across something with impact.  It forces you to stop and linger for a while on this image instead of simply continue to turn the page.  This 'pause' is what I mean by 'value to stop '.  You can shoot a photo fo a sunset Sun, but we have all seen thousands of sunsets so a sunset is unlikely to get anyone's attention (it should really be an amazing sunset).

  Normally, I'm looking for bases...

  -What is the upgrade to the point?

  Is technically correct exposure (not over-exposed or underexposed)?

  -And then there is a variation on this... the exhibition is also artistic attractive?  Have you used a narrow depth of field to help some element of the image stand out and blur the background & foreground?  Have you used a shutter speed to create motion blur and involves a feeling of movement in a photo?  These are examples of ways to be not only "technically" correct, but artistically and creatively engaging.

  What the composition?  You draw look me at something?  Doesn't it seem balanced?   Is the awkward cropping?

  I could go on with more examples, but the point is, I would look for a technically good picture and also an attractive artistic image that draws me in.

  While your image is nicefly focused and well exposed, what am I missing, it is a focal point of interest.    I guess you could say that these rocks are a focal point, but the framing is random and nothing especially attracts me to this topic.

  Shutter speed was fast enough to 'freeze' the movement of water and the water is dramatic (he's not a storm or huge waves, etc.)  In other words, is there anything of particular interest in the water.   If you want to evoke a feeling or an emotion of tranquility or peace, you could use a neutral density filter (for example 10 stop filter) and take a picture of long exposure (on a tripod) near evening, and also to the low level of water near and it blurs a look almost glass-like water (sometimes if the water is a little more active ", you get a misty look).  Use of a circular polarizer (CPL) can help to adjust the reflection of the water and make it easier to see the bottom in the water.

  You mentioned that you have the Peterson book (I assume you mean "Understanding exposure" by Bryan).  In this book, you will learn how to turn in "manual mode".  I think everyone should learn to shoot in manual mode and then learn how to decide when to use fast shutter speed speeds up rather than slow shutter speeds or openings close vs. openness for creative impact.  Once you know "how" to control your cmaera for impact, you can't use just 'manual' - I use almost all modes on my camera.

  There is a book that I like on the composition of Michael Freeman called "the photographer's eye: composition and Design for better Digital Photos.

  Take some time to read... then take a LOT of time to go shoot and practice.  Some people are strong supporters of "comes out and shoot".  I prefer to shoot with a goal... read something, then go try to apply this thing (instead of justing out aimlessly).   This is useful because you can come home, review your shots and decide how well you achieved your goal (doing things of goals that you can achieve with realism).

• To free up disk space, Outlook Express can compact messages. This can take up to a few minutes.

  Every few minutes the message:

  "To free up disk space, Outlook Express can compact messages.  This can take up to a few minutes. »

  It is irrelevant for two reasons:

  (1) I do not use Outlook Express and have therefore no messages to be compacted.

  (2) I have not free disk space as I am currently using only five percent of the very large disks.

  Is could someone please tell me how I get rid of this very irritating message.

  Try to reset the compact County in the registry:

  1. Start the registry editor.
  2. Open this key:

     \Software\Microsoft\Outlook Express\5.0 HKEY_CURRENT_USER\Identities\ {identity}

     where the identity is a string of letters, numbers, and dashes.

  3. The value of Compact Check Count to 0.
  4. Close the registry editor.

  For more information, see why you should let Outlook Express Compact Messages when it asks you .

  WARNING: Incorrectly editing the registry can damage your system and prevent Windows to start. Before you do, back up your important data, make a restore point and make sure that you know how to repair a damaged system. Boulder computer Maven
  Most Microsoft Valuable Professional

• When I paste a picture of the painting he takes only a fraction of the bridge.

  When I paste a picture of the painting he takes only a fraction of the bridge. I need the bridge to be smaller or the larger picture that when I post the picture he is not dating a lot of white on the right side... What should do?

  original title: paint

  If you tap the lower right corner of the canvas, you will see double arrows.

  Click and drag the smaller canvas before you save it.

  Also: Click on the Image in the Menu click on attributes and set the desired size.

  Also: Click on the Image on the Menu then resize/tilt

  Since you have Vista, you can use the tool to capture in all programs, accessories.

  The Snipping Tool is much faster than (ALT) print screen

  You can send directly to E-mail also and other good options.

• OSB vs. SOA - that one can take a max of burden in terms of traffic req/RESP

  Hello
  
  I have a few basic questions about the load capacity of the OSB and soa.
  1. is there a doc oracle indicating how much traffic OSB or SOA components (bpel, mediator, etc.) can take in terms of request/response / hour with some infrastructure?
  2 Diff in the legend of java in bpel, osb?
  3. What is the most stable product in such high load situation. Lake 2 req/resp / hour.
  4. is there a link between the number of javacallouts and the OSB and SOA performance.
  
  
  Kind regards
  Passionate about SOA.

  Hi Slim,

  Interesting challenge... As I said before, it is unlikely that you will find the statistics you want, this type of study is very special for a use case, the platform and infrastructure... There is no generic magic number...

  I can say that the OSB is lightweight and scalable and I would be surprised if he would become a bottleneck if running in a well sized material... The bottleneck is usually to the external system. I also believe that if you add SOA Suite in the image you add overhead rather than to improve performance, you add SOA Suite if you need features such as audit, traceability, recovery and so on that you won't with OSB only... There is an old study on the link below, but I doubt applies to your case, it can be useful anyway...
  http://Biemond.blogspot.com.au/2009/06/OSB-ESB-performance-comparison.html

  Hardware sizing is always a challenge... I advise you to write a typical service and a worse scenario and use a tool such as jmeter to test how much flow you can get your infrastructure... Legends of Java and complex xml transformation transformation are points to emphasize... Use a cluster of OSB topology so you can easily add new nodes if necessary...

  See you soon,.
  Vlad

• Audio can be separated into two tracks of channel once it is already on the timeline?

  I've recently updated my old first 6.5 to the CS6. I have 4 hours of footage that shows my only audio in the Audio track #1. I do not see each channel separately. I need to change the audio channels separately.

  I just found out that I should have changed an audio setting for each prior clip to add it to the timeline in order to have audio channels display separately.

  Audio can be separated into two tracks of channel once it is already on the timeline? I hope of course. It could be done in the first former before Pro.

  Help, please. I look forward to a response. I'm on a tight schedule.

  I thank in advance anyone who can answer.

  Fill effects that are for you.

• Please help - I don't understand this: because iPad can contain only the content of five Apple ID.

  I give my son my iPad.

  I try to download Apps on it and I get the message: some of the files in the iTunes Store iTunes library were not copied to the iPad because iPad can contain only the content of five Apple ID.

  As far as I know there are only 2 Apple ID involved - my own and the one we did for him as a minor.

  If someone has had this problem and can you help me to overcome.

  It is typical that this situation happens the day before her birthday - I wanted to give him tomorrow all loaded with his own stuff. It five of its apps accepted last month when I first came with the idea and now...

  Anyone?

  This means what it means: iTunes Store items are tagged with the Apple that was used to buy ID. Apparently in this case, for some reason, over 5 ID are involved. Which could include accounts that are no longer used.

  In general, it is best to follow these steps before giving your iPad to someone else: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• How can I print only 1 page web/29 FF? With 29, you can change only the first field (1 of 5, 2 of 5, 3, 5, etc.) This means I can print only 5 pages,

  So I can not print just 1 of 5 pages. The default, 1-5, will display all 5 pages. The 2nd field cannot be changed, possible in previous versions of FF, 1 of 1. Therefore, I can print only all 5 pages, 2-5, 3-5, etc. WTF - I keep losing the print paper. I had printing edit add-on, but that doesn't seem to help. I've been through several versions of FF and do not like the format of 29.

  In fact, with the addon print change, if I click on the arrow down I get old print format options and can do.

• 2 slots for ram, or I can use only a single slot?

  Hello..

  IV ' e bought 8 GB of ram for my MBP 2012 has 4 GB of memory.

  But I totally forgot that she has 2 slots for ram!

  so you can use only a single slot? or I have to buy another ram?

  Thankss

  For best performance Mac need pairs of corresponding RAM modules, swap or buy more is recommended all things being equal. I would however expect sentencing of incompatibility performance much smaller than the benefit of the upgrade beyond 4 GB, so you could run with 8 GB in a slot and the original 2 GB in one for 10 GB total installed.

• Google Maps: pan and zoom controls are not displayed. 'PIN' markers can appear only once, and then disappear.

  Loading Google Maps, either directly, or where they are incorporated into other sites, orders pan and zoom are not displayed. Location markers 'PIN' can appear only once, but disappear after doing anything with the card. I'm on the last Windows XP and latest Firefox. This problem is long-standing and has remained the same during several different versions of Firefox and Windows updates. I tried "CTRL-0' no effect."

  Problem solved by 'Reset Firefox'. Before that, tried "Safe Mode", no difference. Not aware of the limits on the cookies or the memory usage. Controls on the left (Pan, zoom) for Google Maps were good here and in usual and sizing correct positions and could be found with the cursor and activate it, but 'ghosts' that were not display. Same problem if the content was maps or satellite pix. Reset solved the problem.

• When I switch to 20 of Firefox, I can open only 1 window of Firefox using Windows XP

  Using Windows XP with SP3
  If you use Firefox 7 I am able to open multiple windows of Firefox
  When I switch to 20 Firefox I can open only 1 window of Firefox

  How am I able to open multiple windows of Firefox using Firefox 20?

  Firefox (or Windows) display an error message if you try to open a second window?

  Or is the problem change the menu (orange button Firefox) compact in Firefox 20? In Firefox 20, new window is now a choice secondary on the new tab, as shown in the attached screenshot. Historically, I press Ctrl + n, I didn't notice that until that earlier.

  Edit: For the record, it is indeed Firefox 21 in the screenshot.