Can Tecra A10 - 11K - I switch to the SSD

Similar Questions

• Can I use Tecra A10 OS disk to install the OS on Tecra M10?

  I have a tecra A10 complete with Windows Vista Business installed (and saved in an image using Easeus Todo backup file

  However I also have access to a Tecra M10 entered without an operating system, although the sticker COST (product key) is the same for a windows Vista Business.

  My question is: would my Windows Vista Business backup work A10 on the M10 (i.e. would it load hard disk M10 and then to work properly)

  If someone can advise on this subject I would be grateful if you please

  Best wishes
  Ian

  At first, I must say that Toshiba recovery image created separately for each laptop model and it is 100% created to work on the specific model. Why?
  Each laptop model has different hardware platform and all the drivers, tools and utilities for some models are part of the recovery image. These recovery images are also tested.

  Generally if the two models have the same hardware platform (hardware) it can be used.

• Re: Tecra A10 - 12O - how to buy the 64-bit version of Vista?

  Hello!

  I bought Tecra A10 - 12O with 4 GB of ram.
  My Tecra shipped only with Windows Vista Business 32-bit so I can use only 3, 2 GB of memory.
  I got to know that Microsoft allows me to use the 64 bit instead of 32 bit version - legally.
  I have to buy 64 bit media much chipper as the new Vista box.

  Here is the link to the Polish Microsoft page where I could order 64-bit media [http://www.microsoft.com/windowsvista/1045/ordermedia/pl-pl/default.mspx], of course, if this page would accept my product key.

  Microsoft says I can get 64 bit Toshiba media.
  I can't find Toshiba Web information pages on how to get the media. Polish Toshibas service says that it is not possible.

  Does anyone know how to buy that media?

  concerning
  Tomek

  Hello

  If you want to use the Vista 64 bit OS, then you will need to buy a full license Vista 64-bit.
  The 32-bit Vista preinstalled on your laptop is only the OEM licenses and the serial key belongs to this operating system preinstalled.

  See you soon

• Tecra A10 - fake error messages and the date of

  Hello, Toshiba Tecra A10, PTSB0A-002001 under XP pro,

  I get the wrong date & error messages on my cell phone when I get out my laptop for long periods off without charge, so I guess that the Cmos battery is not good, so I ask: what is the cmos battery number and where can I get one?

  Thank you

  Hi joe75,.

  Before you exchange the CMOS battery: leave the AC adapter plugged in for at least 24 hours. During this procedure the CMOS battery recharges and the laptop should be able to store the correct date & settings repeatedly.

  Check this box!

• Tecra R840 - need help for installing the SSD

  Hello

  Sorry, again, but I really need help with that?
  My new ssd (arriving in a few days) is a Plextor M5P which is 7 mm thick! My Tecra R840-16J have a thickness 9.5 mm HDD and what I've seen is no caddy!
  I would be grateful all the tricks for installing the ssd drive in my Tecra!

  Thanks for your time,

  Paulo

  Hello Paulo

  As far as I know that some models are available with drive HARD and some with SSD these models with SSD have small SSD support. SSD is fixed by 4 screws in this medium.

  I put t really know how to help you now. Maybe you should contact the nearest Toshiba service provider and ask for help. I think they can check the part number of this door - or maybe order one for you.

• HP 15: Switch to the SSD

  I want to change the SSD hard drive, but I'll always be able to use the version of windows OEM?

  I heard that the key is on the BIOS?

  Hello:

  You should be fine as long as the hard drive you buy is not much smaller than the one supplied with your laptop, and you plan to use the disc/card reader of recovery than you did when you got your PC.

  Or, if you have OEM W8.1 installation media.  The product key automatically fills a valid operating system installation.

  I'm about to do it myself.  I bought a HP 350 G1 in February with a 500 GB hard drive and I bought a 240 GB Intel SSD 535.  It was delivered, but I don't him have not yet received.

  I hope that the recovery disks that I made will work on the 240 GB hard drive.

  But the first thing I'll try to see if I can just put the last backup system image I did in Windows on the new SSD, so I can't do a thing to update or reinstall programs, files, etc.

  However, I have the chance to have a real HP W8.1 Pro OEM installation disc where the recovery disks do not work.

  My laptop came with W8.1 Pro demoted to W7 Pro.

  The recovery media that I made was to W7 Pro, but since I intend to switch to W10 anyway, if I have to use the installation of W8.1 on the new SSD disk, it will be fine for me.

  You can also see if doing your own installation of Microsoft W8.1 media will work with the product key in your laptop.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Can HP 17-J005EA I switch to a SSD

  Hi all

  How do I know who and what makes the SSD are compatible with this laptop *.

  My new laptop is amazing and I am very satisfied with the performance. But... I do not understand for a laptop for the price of... Well, we know the price, it did not have an SSD as drive and a HARD drive as your secondary HARD drive. Why HP had no 7200 RPM HARD drive instead of 5400 RPM I'll never know. 5400 RPM for a HARD drive in a laptop with a high spec is amazing.

  I would like to change the HARD disk from primary to a 240 GB SSD, but I am concerned about the warranty on the laptop. Everything I'm doing upgrades the main HARD drive to a SSD drive that would not only to improve the performance of the laptop. I built and now my own custom built for 15 years and only recently built drilling rigs a new rig custom which is a Coolermaster COSMOS II and I don't skimp on the custom versions as this matter is very expensive.

  I don't see there a problem with the upgrade of the HARD primary for one SSD drive to be honest, I am an experienced system integrator and I would like to put Windows Pro 8.1 on this SSD instead of the default win 8 STD. I created a PID and CFG files in order to bypass the built-in license key, so I can install Windows 8 Pro.

  Thanks in advance

  Enjoy Christmas and a happy new year to everyone at HP and the HP forum. You have been so helpful, and I really appreciate your help.

  Are you sure that your laptop has not already a disk configuration hard mSATA as memory cache?

  Use the HP Envy 17 Notebook Maintenance & Service guide to get the specs for one SSD that will work with your laptop.

  As far as brands go, it's your choice. I advise you to buy an SSD with a upgrade kit (usb to SATA cable & software of cloning). I suggest a brand like Corsair. They make and sell hard drives SSD as autonomous disks and Portable SSD upgrade kits. I have one of the kits and the upgrade went perfectly.

• Tecra S11 - 11 p stand for the SSD HARD drive

  Hello

  I have a question regarding the use of the intensity of the HDD and SSD.
  MyvToshiba HDD use 5V 800mA. The SSD I use takes 5 v and 1, 6a. That's double the amps used by the HARD drive.
  There will be problems with the power supply?

  > There will be problems with the power supply?
  Why?
  In the worst cases, the battery working time would be a bit shorter due to the higher consumption of the power of the SSD, but it doesn't have to be a bigger problem

• Can a boolean have a switch and the closed mechanical action?

  I have a Boolean value set to true creates a text file until it turns out wrong (switch when you press on). However, I also want this value to a time indicator reset when the Boolean value is initially pressed as true. Now if the Boolean is wired to the time indicator, time remains to 0.0 when it's true. But for now, I need to act as a lock when you press. How can I do to solve this?

  Thank you

  You can consider using the Boolean value to trigger an event.  Then put all the stuff you want to do in the case... detect even if this is the first press of the button...

  Hope that helps.

  Hummer1

• Tecra A10 won't boot to the top

  My laptop does not start at the top.
  When I plug in the power supply of the Green LED on the front of the palm rest (on the far left LED) flashes slowly.
  No other led is on at all. By pressing the power on button doesn't produce no effect.

  Please can someone tell what might be the problem with this laptop.

  "Maybe someone knows if the special 'sequence' of the flashing is listed as meaning any lease of particular problem."

  Your kind help in this matter would be appreciated.

  Thank you
  Ian

  Hello
  There must certainly be a hardware malfunction.

  > "Maybe someone knows if the special 'sequence' of the flashing is listed as meaning any lease of particular problem."

  Knowing that you can read the flashing code by using the following procedure:

  Short blinking means 0 and long, 1.
  The code can be something like 0001 0001

  Error code begins with LSB (least significant bit), the error code should therefore be read starting with the last piece. This means that the code: 0001 0001 appears as 1000 1000
  This code you need to turn it into HEX and you will get the error code.

  But in my opinion, even if you want to know what is causing this problem, especially it s any malfunction of the motherboard (maybe also part connected to the motherboard as a RAM module) and it means that the integer part must be replaced.

• Can Tecra A10 - I install 1 TB hard drive?

  Dear forum

  I think put a 1 TB of HARD drive in the laptop. Please anyone know this model can take any hard drive 1 TB laptop please
  Also this laptop can have 2 mounted hard drives please
  Best wishes
  Ian

  Unfortunately, this kind of info is not found on the official pages of Toshiba and there is not any official document on these upgrades so that you can hope that someone with the same machine may publish specific experiences.

  As far as I know this laptop model shipped with HDD of 250 GB max. Of course you can enhance it with the other HARD drive. I think that up to 500 GB should not be problematic.
  Let's see what other people will write about it.

  One more thing: what operating system you want to install on this new HARD drive? Original recovery image?

• Tecra A10 - 1GW (PTSB1E) - update of the firmware & chipset failed

  Hello!

  in fact, I have two problems on my laptop (32-bit) windows 7:

  Burning programs do not find my burner (called 'MAT * a DVD-RAM UJ880AS' Device Manager) and even the [update of the firmware | http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 5 & selSeries = 155 & selProduct = 809 & langua ge = 17 & selOS = 29 & selType = 50 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 12 & 1 7 = selectedLanguage & type = 50 & page = 1 & FROM = windows7 & ID = 68407 & DISO =-1 & driverLanguage = 42] cannot [find him | http://img705.imageshack.us/f/fehler2.png/]. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  Internal burning function Windows works _sometimes_ and disc playback as usual.

  Chipset driver updat doesn't work.
  The [error message: http://img827.imageshack.us/f/fehler1.png/] said 'requirements for the installation of this software is not met. the installation program is abandoned.
  I don't know, I chose the right driver.

  All attempts have been made under administrator rights and disabled antivirus.

  Thanks for help
  Tablerocker

  p.s.: the windows shortcut (just the shortcut!) + e works, too ([unknown error | http://img137.imageshack.us/f/fehler3.png/]). but I don't think it's a problem toshiba ;-)

  > Burning-programs do not find my burner (Device Manager named him "MAT * a DVD-RAM UJ880AS") and even the firmware does not find it. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  What is the status of the STRANGE in Device Manager?
  Are there any yellow exclamation marks?

  I recommend you remove/clear the STRANGE since the Device Manager.
  Then start the registry and delete the upper and lower registry key filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the device. Windows should recognize the STRANGE again.

  Regarding the driver chipset;
  The A10 - 1GW supports the Chipset mobile Intel GM45 Express.
  http://www.Intel.com/products/Notebook/chipsets/GM45/GM45-overview.htm

  If you use the driver from the Intel page, then you should try installing the chipset in Device Manager. This allows to force Windows choose the driver Intel

• Can Tecra A10 - 14 M - I add an Ericsson F3507G card?

  Is it possible to install a 3 G card into the second slot mini pci under the keyboard to enable umts also on the A10 - 14 M?

  To use the card, your machine must be ready for WWAN, means he must have him appropriates the antennas. Without antennas, the card would work or maybe showing very poor performance.

• Tecra A10-13 a - cannot disable the touchpad more

  Dear users,

  I hope that the question was not mailed before.

  Symbol of the touch and the launch is is more shown in the taskbar at the bottom of the screen. FN + F9 works to disable the touchpad.
  What verification Toshiba via programs, utility, the utility touchpad is no longer there (perhaps cc-cleaner has erased).
  How can I reinstall this feature or turn off my touchpad? I can't find it in the control panel or the other.

  Thanks in advance

  Michael

  Hello

  I agree with you: probably the driver for the touchpad has been cleared

  But there s no problem because you can download it from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  After installing the touchpad driver symbol in the taskbar should reappear and you should be able to turn off once again.

• As can a college student, I switch from the individual to the student regime? [was: Hi or hello]

  I am studying at the University for a long time: I'm doing a master's degree in education, but I had always paid at the standard price can arrange you that?

  If you do not speak English, I can speak french its my first language.

  You will need to get this cancelled plan & buy the new of the student.

  Concerning

  Stéphane