Can we ignore the issues and come back later?

When you take the exam of the DCA, we jump and then come back to them later questions.

I know that you cannot mark for review later.

Thanks for the tips.

Several tasks relating to the review are independent of each other, so you could make their task with any order of your choice. But other tasks are related for you wouldn't be able to do a task later successfully if you have completed a task earlier.

For example - you can have 1 task to change some rules a cluster your DRS, but could have jumped the previous task in which you had to create the DRS cluster.

Tags: VMware

Similar Questions

  • How can I keep the story to come back later after that I erase it?

    Even if I select remove history whenever I use Firefox, I noticed that my story shows up again after a few days. It shows even a week or more of previous history sometimes. There is another user for my computer. They ask that my story will be pulled up again and again, just to prove they know what sites I visit? What is going on? I just don't want my story made available to anyone other than me. I don't want any antecedent kept at all.

    more specific, see the options to access the options menu...

  • HP15 ab029tx: window update 10 problems should return to 8.1 windows using recovery and come back later

    My computer hp 15ab029tx laptop came pre-installed with win 8.1. I've recently upgraded to win 10. However, after upgrading, I found the following issues. I installed the latest version of the bios and all drivers are up to date on hp site.

    the problems are.

    1. edge flicker browser. Sometimes I use chrome so ok.

    2. autonomy is by 2 hours earlier, that's around 3: 00.

    3. laptop gets very hot. I found coolsense does not. There is no setting of tdp in the power profile. TDP settings was present in windows 8.1.event viewer is full of errors of health active hp, intel dptf, etc.

    error dptf Intel

    Intel (r) platform dynamic and thermal environment: Requested (8.1.10600.150) TYPE: ERROR

    DPTF Build Version: 8.1.10600.150

    DPTF Build Date: June 26, 2015 11:46:12

    Source file:...... \.. \.. \Sources\Policies\PolicyLib\PolicyBase.cpp @ line 693

    Function: PolicyBase::releaseControlofOsc

    Message: Impossible to release the OSC: failure when executing _OSC:

    DPTF Build Version: 8.1.10600.150

    DPTF Build Date: June 26, 2015 11:46:12

    Source file:...... \.. \Sources\Manager\EsifServices.cpp @ line 473

    The enforcement function: EsifServices:rimitiveExecuteSet

    Message: Error returned by the function interface IBSE services call

    Member: NoParticipant

    Domain: NoDomain

    IBSE Primitive: SET_OPERATING_SYSTEM_CAPABILITIES [93]

    Instance of IBSE: 255

    IBSE return code: ESIF_E_UNSUPPORTED_ACTION_TYPE [1202]

    　

    Policy: Policy critical [0]

    Active health HP errors

    COM exception running a command GET Casl EmbeddedController.AuditLog.JSON = return value from the BIOS, which indicates a value of invalid command. : one or more arguments are invalid (Exception from HRESULT: 0 x 80000003)

    4. several fonts of applications is blurred. I use 125% recommended implemented nationally as a 1080 p screen. all drivers intel & nvidia graphics are more recent.

    5. after sleep / standby wireless works irregularly unless I turn it on / off manually & special keys on the keyboard do not work until I restart.

    6. portable seems overall gloomy. (seems to be however performance tests indicate otherwise). Apps to take longer to open.

    So should I go back to earn 8.1 using recovery and wait for more late say 1 year when all bios and driver problems are sorted.

    My main problem is the short battery life and the laptop heats up.

    Concerning

    That's what I'd do - return to Win8.1.

    I have a laptop HP Dv6 Win7 running and the upgrade of Win10 has been a total disaster.  I restored using Win7 HP recovery media.  I'd rather have a BONE more old where everything works, only a new operating system where things do NOT work.

    As to wait a year, the FREE upgrade expires end of August 2016 - so after that, if you still want to upgrade, you will need to purchase a license - and, unlike with previous versions of OS, MS said nothing about the price for upgrade license, or even if such a license will be available then.

  • Coming out of the course or come back later

    Hello

    I was wondering if someone else has run into this problem before. We do not have an LMS system, so we distribute our e-Learning by the files on a disk that is shared in our training rooms. After a person takes the course leaves the course (and browser, or logs off the computer, etc.), the next person who comes to take the course of the first to land on the first slide of the 'Conclusion' section (we used several files to build the course, and then to compile the aggregate).

    We even tried to clear the cache of the browser history to solve the problem, but he persists. Is this something on the end of Captivate, an option somewhere perhaps to turn a feature off?

    I suppose we could try to load the flash drive on computers and get all .swf files to load in... but that would help?

    We get him to help solve the problems, too, but I wanted to check here everything first to see if anyone had any ideas. Thank you!!

    Kate

    Hello

    You use the Table of contents feature? If so, perhaps, you must disable the option 'Self Paced Learning' found by following this path:

    Project > Table of contents > settings button.

    Ensure the 'Self - Paced Learning' is unchecked.

    Dismiss all dialogs, and then re - publish the project so that the new settings are in the output file.

    Test!

    In my view, this option creates a persistent "cookie" which is read when the same file is then opened.

    Let us know how it goes... Rick

    Useful and practical links

    Captivate wish form/Bug report form

    Certified Adobe Captivate training

    SorcerStone blog

    Captivate eBooks

  • How can I get the sound to come back to my mac pro?

    I followed the 'aid' on getting no sound and I don't not what they say will be displayed on the output. Only Optoca; digital output port is

    Try holding the "Option" key and clicking on the speaker in the menu bar. Make sure your speakers are checked. In addition, it's silly, but make sure they are plugged in and turned on.

  • can I download the drive and install it later?

    can I download reader and install it at a later date?

    Sure. You can get the full installer from here and run it when you want to:

    http://get.Adobe.com/reader/Enterprise/

  • Why Firefox doesn't stop running when I turn it off? Every time I have stop and come back later, I get a message that Firefox runs, but does not and I have to restart my computer to access Firefox.

    When I quit Firefox, I get all stop messages, so I guess he stopped it as it should. But if I go back to my PC (within an hour or two) and click on Firefox mentioned, I get the message 'runningbutnotresponding' and invites him to restart my PC.

    See - Firefox crashes when you close

  • Taking a break during a course and come back later.

    I am trying to find a way to allow a student to stop in the middle of a course which includes some questions short quiz and return to their last location at a later date. Maybe I can use something like a "post-resultats" in the middle of the course, but I would need to know which system variables to post.

    Is it possible to add a "POST RESULTS" button on any slide, but he disguise as an "EXIT" button of course?

    AWSOME...

    This works.

    It makes sense that you would need to turn off the quiz Reporting If you want to be able to stop anywhere and return at a later date. Otherwise the sequence of data interaction for each slide as the student goes through each slide would be lost.

    So it seems likde I need to create my own tracking data of the interaction of each student. This part will take some work.

    Thanks for you help Avinash Agrawal.

  • What are the issues and how can I put the documents in the files?

    As usual; Oracle is absolutely horrible in providing any kind of basic instructions on the use of the products.

    I need to upload files to a structure (don't care if it's collections, folders, or in mason jars as long as it works) and be able version them and seize those I want.

    I managed to get a variety of things to work with the genericSoapService (cannot use the API in accordance with local policy), but everything I check in goes in (don't know where)

    I don't think I'm even asking the right questions because my web researchers increase irrelevant results.

    What are the issues and how can I put the documents in the files?

    I created a few files like this:

    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
   <soapenv:Header/>
   <soapenv:Body>
<GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
<Service IdcService="FLD_CREATE_FOLDER">
<Document>
<Field name="fParentGUID">C976021E28DD8B26FB2D437B5BF56B7F</Field>
<Field name="fPath">/RAFT/Appraisals/</Field>
<Field name="fFolderName">0111234567</Field>
<Field name="fSecurityGroup">RAFT_ADMINGrp</Field>
</Document>
</Service>
</GenericRequest>
   </soapenv:Body>
</soapenv:Envelope>

    Here's a sample call:

    The virtual path is/Appraisals/0111234567 /.

    The GUID for this folder is CBF8EF9C59F8A6C84EB31C68F0903399

    I see the reference to xCollectionID when I look for answers, but the data is not available for me (see the output below)

    When I run this it stores the file but the file does not appear in the folder.

    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
     <soapenv:Header/>
<soapenv:Body>
<GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
<Service IdcService="CHECKIN_UNIVERSAL">
<Document>
<Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</Field>
<Field name="dDocType">Document</Field>
<Field name="dSecurityGroup">Public</Field>
<Field name="dDocAccount"/>
<Field name="dSecurityGroup">RAFT_ADMINGrp</Field>
<Field name="xFHACaseNumber">0111234567</Field>
<Field name="xFHADocumentType">Appraisal</Field>
<Field name="dDocTitle">tuesday2document.txt</Field>
<File name="primaryFile" href="whereami.txt">
<Contents>dGhpcyBpcyBteSBkb2N1bWVudA==</Contents>
</File>
</Document>
</Service>
</GenericRequest>
</soapenv:Body>
</soapenv:Envelope>

    Returns:

    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
   <env:Header/>
   <env:Body>
      <ns2:GenericResponse xmlns:ns2="http://www.oracle.com/UCM">
         <ns2:Service IdcService="CHECKIN_UNIVERSAL">
            <ns2:Document>
               <ns2:Field name="reserveLocation">false</ns2:Field>
               <ns2:Field name="IdcService">CHECKIN_UNIVERSAL</ns2:Field>
               <ns2:Field name="dSecurityGroup">RAFT_ADMINGrp</ns2:Field>
               <ns2:Field name="dpTriggerField">xIdcProfile</ns2:Field>
               <ns2:Field name="dDocType">Document</ns2:Field>
               <ns2:Field name="scriptableActionErr"/>
               <ns2:Field name="xPartitionId:isSetDefault">1</ns2:Field>
               <ns2:Field name="xWebFlag"/>
               <ns2:Field name="dDocCreator">C03999</ns2:Field>
               <ns2:Field name="dDocAccount"/>
               <ns2:Field name="xClbraUserList"/>
               <ns2:Field name="dLocation"/>
               <ns2:Field name="xWCPageId:isSetDefault">1</ns2:Field>
               <ns2:Field name="dWebExtension">txt</ns2:Field>
               <ns2:Field name="isNew">1</ns2:Field>
               <ns2:Field name="IsQueryObjectPersistent"/>
               <ns2:Field name="xWCTags"/>
               <ns2:Field name="LockedContents1">dDocName:WCC_Cluster-001208</ns2:Field>
               <ns2:Field name="dClbraName"/>
               <ns2:Field name="dCreateDate">10/7/14 8:58 AM</ns2:Field>
               <ns2:Field name="xClbraAliasList"/>
               <ns2:Field name="dActionMillis">72487502</ns2:Field>
               <ns2:Field name="StatusMessage">Successfully checked in content item 'WCC_CLUSTER-001208'.</ns2:Field>
               <ns2:Field name="dIsPrimary">1</ns2:Field>
               <ns2:Field name="isInfoOnly"/>
               <ns2:Field name="dActionDate">10/7/14 8:58 AM</ns2:Field>
               <ns2:Field name="xWCPageId"/>
               <ns2:Field name="xLibraryGUID:isSetDefault">1</ns2:Field>
               <ns2:Field name="dDocID">1216</ns2:Field>
               <ns2:Field name="dPublishState"/>
               <ns2:Field name="xFHACaseNumber">0111234567</ns2:Field>
               <ns2:Field name="doSorting">0</ns2:Field>
               <ns2:Field name="primaryFile">whereami.txt</ns2:Field>
               <ns2:Field name="dRevisionID">1</ns2:Field>
               <ns2:Field name="xExternalDataSet"/>
               <ns2:Field name="scriptableActionFunction">determineCheckin</ns2:Field>
               <ns2:Field name="UseForwardOnlyCursor"/>
               <ns2:Field name="noDocLock">1</ns2:Field>
               <ns2:Field name="dID">1208</ns2:Field>
               <ns2:Field name="xWCTags:isSetDefault">1</ns2:Field>
               <ns2:Field name="xPartitionId"/>
               <ns2:Field name="xComments:isSetDefault">1</ns2:Field>
               <ns2:Field name="dInDate">10/7/14 8:58 AM</ns2:Field>
               <ns2:Field name="dDocOwner">C03999</ns2:Field>
               <ns2:Field name="dUser">C03999</ns2:Field>
               <ns2:Field name="isDocProfileUsed">true</ns2:Field>
               <ns2:Field name="scriptableActionParams"/>
               <ns2:Field name="dpEvent">OnImport</ns2:Field>
               <ns2:Field name="xExternalDataSet:isSetDefault">1</ns2:Field>
               <ns2:Field name="dDocLastModifier">C03999</ns2:Field>
               <ns2:Field name="DocExists"/>
               <ns2:Field name="dConversion">PassThru</ns2:Field>
               <ns2:Field name="StatusCode">0</ns2:Field>
               <ns2:Field name="xStorageRule:isSetDefault">1</ns2:Field>
               <ns2:Field name="dStatus">DONE</ns2:Field>
               <ns2:Field name="dOriginalName">whereami.txt</ns2:Field>
               <ns2:Field name="dRevClassID">1208</ns2:Field>
               <ns2:Field name="idcToken"/>
               <ns2:Field name="dRevLabel">1</ns2:Field>
               <ns2:Field name="dDocName">WCC_CLUSTER-001208</ns2:Field>
               <ns2:Field name="xWCWorkflowApproverUserList:isSetDefault">1</ns2:Field>
               <ns2:Field name="xStorageRule">webasset</ns2:Field>
               <ns2:Field name="localizedForResponse">1</ns2:Field>
               <ns2:Field name="dPublishType"/>
               <ns2:Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</ns2:Field>
               <ns2:Field name="dFormat">text/plain</ns2:Field>
               <ns2:Field name="scriptableActionType">3</ns2:Field>
               <ns2:Field name="dDocTitle">tuesday2document.txt</ns2:Field>
               <ns2:Field name="dpAction">CheckinNew</ns2:Field>
               <ns2:Field name="primaryFile:path">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
               <ns2:Field name="refreshMonikers"/>
               <ns2:Field name="xWCWorkflowAssignment"/>
               <ns2:Field name="isEditMode">1</ns2:Field>
               <ns2:Field name="refreshSubMonikers"/>
               <ns2:Field name="xFHADocumentType">Appraisal</ns2:Field>
               <ns2:Field name="changedMonikers"/>
               <ns2:Field name="dRevRank">0</ns2:Field>
               <ns2:Field name="StorageRule">webasset</ns2:Field>
               <ns2:Field name="xWCWorkflowApproverUserList"/>
               <ns2:Field name="xComments"/>
               <ns2:Field name="dAction">Checkin</ns2:Field>
               <ns2:Field name="isDocProfileDone">1</ns2:Field>
               <ns2:Field name="xWebFlag:isSetDefault">1</ns2:Field>
               <ns2:Field name="dRawDocID">1215</ns2:Field>
               <ns2:Field name="xLibraryGUID"/>
               <ns2:Field name="StatusMessageKey">!csServiceStatusMessage_checkin,WCC_CLUSTER-001208</ns2:Field>
               <ns2:Field name="xIdcProfile:isSetDefault">1</ns2:Field>
               <ns2:Field name="dWorkflowState"/>
               <ns2:Field name="dProcessingState">Y</ns2:Field>
               <ns2:Field name="dDocCreatedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
               <ns2:Field name="dDocAuthor">C03999</ns2:Field>
               <ns2:Field name="dOutDate"/>
               <ns2:Field name="dIsWebFormat">0</ns2:Field>
               <ns2:Field name="scriptableActionFlags">12</ns2:Field>
               <ns2:Field name="isCheckin">1</ns2:Field>
               <ns2:Field name="RenditionId">webViewableFile</ns2:Field>
               <ns2:Field name="dExtension">txt</ns2:Field>
               <ns2:Field name="VaultfilePath">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
               <ns2:Field name="prevReleaseState"/>
               <ns2:Field name="isStatusChanged">1</ns2:Field>
               <ns2:Field name="dReleaseState">N</ns2:Field>
               <ns2:Field name="dWebOriginalName">WCC_CLUSTER-001208~1.txt</ns2:Field>
               <ns2:Field name="xWCWorkflowAssignment:isSetDefault">1</ns2:Field>
               <ns2:Field name="dDocLastModifiedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
               <ns2:Field name="dFileSize">19</ns2:Field>
               <ns2:Field name="xIdcProfile"/>
            </ns2:Document>
         </ns2:Service>
      </ns2:GenericResponse>
   </env:Body>
</env:Envelope>

    CBF8EF9C59F8A6C84EB31C68F0903399

    Replace fFolderGUID by fParentGUID

  • Why can not download adobe CC? I click on 'buy now' and it takes me to a page that says "Please come back later", but your site status says it should work normally

    Why can not download adobe CC? I click on 'buy now' and it takes me to a page that says "Please come back later", but your site status says it should work normally

    Hello

    Use the following link to download the creative cloud app

    https://creative.Adobe.com/products/creative-cloud

  • If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored.

    Original title: computer viruses.

    If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored.

    Hello

    to be Safe side scan always media files are on before you reinstall your data

    using drives flash etc is a well known to transfer viruses, etc.

  • My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

    My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

    My lightroom was great before the crash to work and I have a lot of work still pending.

    You will need the catalog file and all your images. If you have also stored your images on which crashed HDD you will need to copy them as well.

    The default location of the LR catalog file is in your user name folder in the folder on the ROOT of the drive users

  • CAN´t access my files on creative cloud. "Temporarily unavailable page. We will be back soon. "' We are working quickly to resolve the problem and apologize for the delay." Check back later or visit our website for updates of status. In addition, you can

    Hello

    Since a few days I tried to access my files on web creative cloud without success. I ve had this message only:

    "Temporarily unavailable page. We will be back soon. »
    "We are working quickly to resolve the problem and apologize for the delay."
    Check back later or visit our website for updates of status.
    In addition, you can get help in forums of the creative cloud.
    Thank you for understanding! »

    (I used Google Translate)

    Help someone?

    Not sure if you've managed to solve this problem yet or not. I do not no what are the contents of your proxy script, but it's something that you (or your company) you have to solve.

  • Sending information to the issuer and confidential form to a database

    I have an application form for an air show, can be seen here www.hollisterairshow.com/volunteerapp.php and when the user clicks on submit their information is added to a MySQL database and the user is redirected to a "thank you" page, this works very well and may be sufficient "such what." Try it if you want!

    I would try to improve it a little bit in two ways:

    1. View information of the volunteers submitted on the "thank you" page and/or
    2. Give the user the ability to send by e-mail a copy of their information on their own (it includes days they expect to be available, favorite activity etc.)

    The information that the user submits also includes personal information such as email address, phone number and mailing address and are therefore not accessible by anyone other than the issuer and administrator of aeronautics or me. I have a password protected to secure the area for the administrator to access all the info and it works fine. The primary key of the volunteer table is a "volunteernumber" which is a numeric field that is incremented by 1 automatically when recording is written in the table.

    So my concerns are:

    1. How to move the volunteernumber back to "thank you" page so that it is not visible to the user (if I used a URL parameter the user could see that they were, say, volunteers number 29 and it wouldn't take a lot of skill to change to a different number of volunteer and see someone other info)
    2. I think I read somewhere that the sending of an e-mail message can open me up to malicious attacks - not very likely, but still possible

    I would really appreciate a pointer in the right direction. I use DW CS4.

    Thank you

    Tony

    tonybabb wrote:

    -could there be a problem of formatting here or if I made another mistake?

    To use a session variable, page should start with session_start();.

  • Computer shuts off and comes back over and over again trying to open a session

    Original title: when I turn on the computer and the connection, it will compromise the destop and then shuts off and comes back, over and over again. I have run and remove detections from virus and bug, but it still does not work. Help
    Can I delete something so that my computer turned on? After f8 button the window xp from microsoft to address blue lights with a list of things to do in which nothing has allowed so far.

    Hi bonnieb1941,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    3. How have you tried to run the virus and bug checks?

    4. is this the machine is disconnected and re-login in back or just reboot?

    Step 1:

    If the machine is in continuous loop, then try to disable the auto restart in case of system error and let us know the error code.

    a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

    b. Select disables automatic system failure reboot when the Windows Advanced Options menu is displayed and press ENTER.

    Check the link for more information:

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2:

    Also, try unplugging the external devices connected to the system and check if the system boots normally.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for