Can we reach our editors?
Hello
is it possible that we can contact people who wrote a review for our application?
I have some criticisms with 3 stars who are critical of the direction of the racket. Well, I just upgraded and added a new method of control, but I don't think that reviewers will return to appworld and change their review if nobody tells them that it is still possible.
I agree that the rating system is not ideal at this time.
But I do not think that the star rating persists if you refuse the review.
Tags: BlackBerry Developers
Similar Questions
-
Can not reach the internal network on the VPN
Hello
So I've been setting up an ASA5510 to the best of my knowledge to allow the VPN to our internal network access and its riches. IPSEC is configured correctly.
When connected I get an IP address from the VPN subnet with success, but I can't reach all internal hosts (failed pings). Also, I noticed that my default gateway uses a VPN subnet IP address.
I have followed the guide Wizard and configuration Online but am still in the dark... it's all a bit new to me!
I'll post the config if you need to see.
Any help would be appreciated!
Hi, just a few things I noticed. What group are you testing with? The tunnel of split for the two groups should be a standard ACL, well it doesn't have to be, but it is generally. I suspect that it doesn't because the ACL is defined in the wrong direction. You can therefore remove the first line of the RemoteVPNAccess of the ACL or replace it with a standard ACL. I recommend using a standard ACL.
Also applies similarly to your nat not and inside the ACL, they should be allowing the subnets the to address of the pool. So you can delete the second line of the ACL sheep and ' inside_access_in access-list extended ip 10.10.200.0 allow 255.255.255.0 everything ' inside ACL.
Also any tunnel or use a tunnel of split ACL but not both and also try to remove the filter from vpn, we can get to that after we have connectivity.
-
I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please
Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor. Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.
-
I bought the iphone 6 to find her icloud is locked. I tried to contact the owner, but I can't reach him. are there opportunities to take the step of activation? Thank you.
Hello
You describe Activation Lock, which prevents the unauthorized use of the iPhone if it is lost or stolen.
This can be disabled either by:
- The former owner, grabbing their Apple ID and password of the device.
- The previous owner, removing the iPhone in their list of devices to locate my iPhone via iCloud.com.
In both cases, be sure to follow the instructions in the first article below.
If you can not organize or either of these actions, then you will not be able to use the iPhone. There is no way around this security feature.
More information and instructions:
-
Can save us our system drive on Dropbox?
Hello!
As the title says, "can save us our system drive on Dropbox?
Thank you!
Better to backup to an external drive using the Time Machine application in your Applications folder.
-
Trusteer report running on the computer, but FF v 30.0 for Mac OS won't load so I can't access our bank account. Support of Trusteer continues to tell me it is a browser problem.
Thank youJohn99,
Thanks for the reply, it seems that Trusteer is slightly behind updates of Firefox browser. I was talking about support Trusteer at the same time that Mozilla and got this response from Trusteer and it works now. Seems they have a newer version upwards on the website dated June 2014.
Thanks for the help!Trusteer:
We recommend that you uninstall the current version of the report, use the Terminal to remove the old report files and then install the latest version of the report.You can uninstall report by following these instructions:
http://www.Trusteer.com/support/uninstalling-rapport-Mac-OS-xOnce the report is completely uninstalled, remove its remaining files as described here: http://www.trusteer.com/support/remove-folders-mac
At the end of this procedure, you can download update of the report can be found in this link:
http://www.Trusteer.com/support/rapport-installation-linksPlease be sure to restart your computer once the latest version is installed and let us know if the problem has been resolved.
-
I can't reach the order on Amazon. I get a connection message has been reset
I can't reach the order on Amazon. Can I not move freely to my account. I tried to sign up with other names and addresses of e-mail, but also without success. I disabled anti virus (Avast) and the Windows Firewall, clean cookies etc. I spent some time with Amazon and my server (PlusNet) tries to solve this problem. It also occurs with Internet Explorer and Safari.
The problem lies within my own computer, but does not appear to affect any site other than the Amazon. Reset the connection message is common, what is normal or not I don't know, but when retrial normally goes away when you surf elsewhere
I can access it on Amazon using computers from a neighbor.
Have you tried to read this article
https://support.Mozilla.org/en-us/KB/error%20loading%20Web%20sites#Interrupted_or_reset_connection
-
Satellite Pro C650 can't find our DHCP server
Hello
We just recived 8 new Satellite Pro C650 and care about their image.
When connect us to our network via a cable and boot on LAN of the laptop can not find our DHCP server and so of does not obtain an IP address.If we connect to an another laptop\workstation in the same Manor, it works very well.
All the settings are correct in the BIOS.
Any ideas.
Hello
First of all, you should check if the settings of TCP/IP to connect to the local network.
Network-> properties-> LAN (local area) connections-> TCP/IP-> propertiesHere, you should check if the options for the IP address, DNS are set to obtain automatically.
In the advanced settings of TCP/IP in IP settings tab active DHCP must be visible.In addition, please check if all firewalls do not prevent the laptop to connect to the local network.
-
Can't reach the BIOS on Satellite L775
Hello
Since this morning and a failure of the upgrade to Ubuntu, I can't reach the BIOS. My laptop is the L775-13 Satellite.
The screen is frozen on Toshiba official screen.You have an idea?
Thank you
I assume that allows you to enter the F2 BIOS settings.
You can enter the advanced startup options with F8 menu or start using F12?The same problem again?
-
Hello community of Hp.
I have a problem with my PORTABLE HP PAVILION dv2500 PC.
A few months ago, everything is ok.
It can detect our wifi.
then yesterday I just know that it can not detect our wifi at home.
I mean that my laptop can detect our neighbors wifi. but it can not detect our own wifi.I already perform some troubleshooting method.
the first thing I did.
is that I perform a RESET of my modem.
because I think that the IP of my laptop has been block by my modem.
If, after that, it's the same. It can not detect our wifi.second is.
I reformat WINDOWS Vista x 64.
but it's the same thing.
It can only detect our neighbors wifi. but our is not.last thing I did was to change the ip address of my laptop.
but it did not solve my problem either.pls help me solve this problem.
Thank you.
and God bless you all.
more power for the team of hp with this site.
Please send me an email or comment here if you have an idea on how to solve my problem.
[Personal information]
Thanks again and best regards.Hi @BooJimBoo,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
I stumbled upon your post on the HP laptop and wanted to help you! I looked in your question about your Hp Pavilion dv2500 Notebook and problems with the wireless connection. Try to reset the router. Wait 30 seconds before plugging and unplugging the router to make sure, it resets completely. Here is a link for troubleshooting wireless connection, if you need. Section I fell better help is the key to security is changed 3. To establish a new connection to the wireless network, return to the network sharing Center window, select set up a connection to a network.If the problem persists, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels. You can contact your Internet provider.
Some say that this download will help fix this Microsoft Fix it.
Here is a linkto help as well.
Please let me know how it goes.You can say thanks for trying to help by clicking on the Thumbs Up below! .
Thank you. -
My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?
Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...
Tell us step by step, in detail what your actions.
Tell us a story
-with a beginning, middle and end. We need to figure out what you know and that you have lived.
If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?
Quoted by of Apple 'how to write a good question.
To help other members in answering your question, give as much detail as possible.
- Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
- Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
- Describe the problem and include all the Details on what seems to make it.
- The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.
For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question
"Keep it short and Simple"-take your time... but be thorough - CCC
-
Apple, I got profile - changing can be reached at the number
In my Apple ID number profile "can be reached in the" watch my sons phone number. How can I change to show mine?
Your Apple ID
4 manage your ID primary Apple, rescue, alternatives and notification email addresses - Apple support
-
original title: password, logon problem
I have a xp system and my friend installed with a password, I can't reach him is there anyway I can get past this issue? I can't even logon to my computer.
Hello
Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below. -
My 2 year old somehow gave a password on our computer and now we can get in our office. Without having to return to the default settings, anyone have a suggestion on how to solve this problem?
If you have a different user account with administrative privileges, Panel you can connect that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.
In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.
MS - MVP - Elephant Boy computers - don't panic!
-
How can I reach a complete file to send instead of having to attach each file separately
I need to send a complete file to someone. This folder has about 200 hundred files it contains. Is it possible that I can just reach the folder instead of having to attach to each file separately.
Right-click on the folder and To Sen. Compressed (zipped) file and send the file resulting in an attachment. The recipient can decompress.
That's assuming that the file is not a size that is too large for e-mail.
Bruce Hagen ~ MS - MVP [Mail]
Maybe you are looking for
-
Vista - Error Code: 0XC01A001D (after the installation of SP1)
question of 0xc01a001d after downloading vista sp1... If I don't have the windows vista startup disk so what do I do?
-
I have a continuous update to repeat its corupt, how to fix it.
Windows Update too wants to repeat the same update every day. When I click it a window opens saying its corupt. I can't find "dk Utility tool too ck disc.»
-
How can I unlock the computer permanently? I'm the only user at home.
Whenever I leave the computer it locks. How can I keep it unlock since I'm the only one using the computer? I tried the padlock logo in the start window, and it still crashes.
-
This action is only valid for products that are currently installed ERROR
I get the above error message everytime I try to open microsoft word, excel etc. and it also appears when I try to open Itunes/Quicktime. I tried opening other programs and they work all (acrobat, Media Player etc.) Recent changes made to your comput
-
Characteristics of S3048-on switch open circuit
Hello I am not able to find the list of the features of open circuit of the switch S3048-WE, I know he support Open - Flow1.3, except that I would like to know all the features of open circuit, it supports, as a match criterion, weather support netco