Can what recovery disks I start with?

Similar Questions

• What recovery disk?

  I have a laptop CQ71 who crashed and requires a "startup device. He was initially loaded with Windows Vista but since being upgraded to Windows 7.  Should what recovery disk I use?

  I'll take a look at NewEgg offers so you can see the required type.

  Ok..

  On this page at NewEgg.com I sort their offers to show only the interface internal IDE and type of external connection USB you need. They have used to be much cheaper, but no manufacturer product more devices with IDE interface for the market.  It is preferable to use types that come supplied with a power supply external adapter por. In this way,. that you do not point out the usb ports on the pc to which you are connecting.

  Best regards

  ERICO

• Re: Recovery DVD tool starts with error message

  Hello.

  Can someone tell me why when I run "create a dvd recovery tool" message appear with "cannot find the partition recovery...". » ???
  It's a whole new Satellite A660 - 1 c 3 bought and opened today.

  This happen if the recovery image is removed or deleted.
  When you buy the new model of notebook and start for the first time preinstalled image must be installed first.

  So if you are capable of operating system pre-installed usage it means you had a notebook with the recovery image on it. I put t know what you did but fact is this structure partitions or the backed up data are changed.
  Have you changed anything in the tool of management of disk (develop partitions, change the ability of the partitions)?

• What recovery disk belongs to which laptop?

  Hello

  We have several laptops from Toshiba (Satellite A100, A200, U300, L300, Tecra M9) and several recovery disks. All recovery disks look alike (the only difference is a code starting with GMR400. How will I know the drive I have to use with a given mobile? Is it possible to tell one of the others? Or I can use any disc with any laptop?

  Thanks for your help

  Hello AMB

  Unfortunately I can't help you much about it because those numbers don't mean a lot to me. Also, I believe that no one here can help you with this stuff. What you can do is to contact nearest Toshiba authorized maintainer and ask for help. They have access to the database of Toshiba and I think they can help you.

  The fact is that you cannot use any disc with any model of Toshiba laptop. Saved on the recovery disk recovery image is created for certain model only and recovery image contains specific drivers for the specific model laptop (depends on the hardware platform).

  Bye and good luck!

• Should what recovery disk I use?

  My laptop came with a recovery disk game three, each disc to say 1, 2, 3. But then he also came with a fourth disc that says disc 1:1. Disk are exactly the same and have what it is saying that should be used first or whatnot, so I have no idea of what we I need to make the recovery.

  The three discs are:

  Media 670066-B21 HP

  Media 670067-B21 HP

  Media 670068-B21 HP

  And the 1:1 disc is:

  Media 700639-B22 HP

  Hello:

  Most likely, you need start Recovery with disk 1 of 3 and the support disc is an additional disk.

  If you are prompted during the recovery process, if you have an additional disk answer Yes.

• What Max BreakPoint to start with?

  I'm a bit new to Muse CC 2015. I use the old version which had no break points.

  I'm trying to figure out how much break to design for.

  I begin with the following:

  1366
  992768
  480

  I start with the 1366 and design everything first and work down.

  I have 3 monitors

  2-19 "res 1280 x 1024

  21 "res wide 1680 x 1050

  I see on the 21 "wide.

  Then when I saw the site in a browser and look on the 19 "it looks great but when I move it to the 21" wide everything is irrelevant. Is it because my height max that I design is 1366?

  So what should be my screen to start with max width?

  URL here at a smaller size, bike monufacturer logos are placed good but opening on the largest screen Monte everthing!

  SNOWCHECK

  Thank you

  theDogger

  See Adobe Muse FAQ

  Also, what are the best dimensions to design a layout in the same Adobe Muse FAQ document

• Embedded audio player doesn't work with Firefox in a laptop computer, but works fine on a PC. How can I fix? It started with the new design of Firefox.

  This problem apparently only occurs with the audio player built into http://www.theskepticsguide.org/ . I tried other embedded audio players from other websites and they work fine. In the Firefox installed in my laptop, no matter what I do it does not play the SGU podcast. When I try to click on the download option it says "Video cannot be read because the file is corrupted. However, I can play and download the podcast without any problem with Firefox installed in my PC, which is the exact same version that is in my laptop, so I don't really know what could be the cause.

  I remember that this was not the case before the new design of Firefox. I tried the solutions proposed on this problem before asking this question. I checked that the plugins are up-to-date. I removed all the addons and plugins, and this did not help either. Firefox reset with no luck. Also tried a fresh install of Firefox and it didn't work. I used the laptop without synchronization first, and then synchronize with no difference. Flash is up to date and there is no apparent problems there.

  Maybe it's a codec missing or damaged? I wouldn't trust codecs from sources other than Microsoft for this purpose, since Firefox tries to use Windows to read the file.

  If you decide to give up and around the native player for a plugin, these changes of settings usually work for this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste media and make a pause so that the list is filtered

  (3) [except XP], double-click on media.windows - media - foundation.enabled to change its value from true to false.

  (4) double click on media.directshow.enabled to change its value from true to false.

• What recovery CD to use with Satellite Pro L20?

  We have several Toshiba laptops in use in our society. I need to restore a (a Satellite Pro L20) to factory settings. However, although I have kept all the recovery CD, most of them have labels which do not mention which model they are intended to be used on. On some of them I wrote the model number on the label by hand, but I did not do that for the L20. I know from experience that if I receive the wrong recovery CD, I have to put dozens of drivers and utilities individually, in order to find the right one would save me a lot of time and stress.

  Each recovery CD has a number (for example GMR400626EN1), so it should be possible to identify the good CD of it, but I can't find the info on the Toshiba web site.

  Is there a list that corresponds to the reference numbers for the models of laptop recovery CD?

  Hello

  This info is certainly not available on the Toshiba support site. What you can try is to contact the partner of service authorized in your country. They have access to the database of Toshiba and I'm sure they can help you.

  If you need addresses and phone numbers please check https://eu.computers.toshiba-europe.com support & downloads search for an ASP.

  Bye and good luck!

• How can I fix error that starts with Ox0000007E?

  When I try to start my computer, I sometimes get the error Ox0000007E (Oxc0000005, Oxe628D36, Ox887937D8, Ox887934D4).  I have a PC HP Pavilion Media Center m8300f (HP).  The operating system is Windows Vista.  What do these errors mean and how can I fix.

  Thank you

  Hello

  Please re - install your chipset drivers.

   
  See the link below link.
   
  How to fix bluescreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233
   
  It may be useful

• I can the recovery disk to find t (windows 8)

  How I can do factory reset for my envy 15 touchscreen smart j021 tx but I can t find the system recovery partition

  Hello

  Have you tried to create a set of instructions:

  http://support.HP.com/us-en/document/c03481733

  Kind regards.

• How can I get the Green Start with Vista button?

  The Green Start button was there, but suddenly changed button round Vista. Is there a way to change this?

  Thank you

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Can what power supply I use with p6740f for the HP model computer?

  I'm looking to update the video cards and realize I also have to upgrade the power supply.  I can't tell if my processor is PCI, PCI Express, etc...

  Could you recommend some ish 500 watt supplies that would work in my computer.

  Thank you very much.

  mdb299 wrote:

  I'm looking to update the video cards and realize I also have to upgrade the power supply.  I can't tell if my processor is PCI, PCI Express, etc...

  Could you recommend some ish 500 watt supplies that would work in my computer.

  Thank you very much.

  MBD, welcome to the forum.

  The video slot is a PCI Express x 16.  You should not buy a video card that is larger than 8 "long.  Otherwise, it should not be in space.  I like XFX, BFG, EVGA, Sapphire and PNY in that order.

  I like the OCZ and Corsair PSU.  They are very good manufacturers.  Their products will provide a clean and stable power supply for your system.  I suggest to measure the existing PSU and comparing them to the one you choose.  This will eliminate the purchase of a power supply that does not fit in the space.

  Please let us know if this solved your problem or not.

• How can I get rid of 'start with mobile Lightroom' text in LR 5.4?

  Everything seems fine in LR 5.4 unless I have the text above where my progress bars to display. It's dispupting my workflow.

  I don't see a checkbox in the prefs to remove it. Any idea how I get rid of this ad?

  Well, I clicked on the little triangle and one of the choices was to revisit my old custom plate.

  Wish it could be made more obvious...

• Aspire S3 - will not start with the disc of recovery USB USB ports.

  I try to use a USB drive to recovery W8 (made with the acer recovery management) in my S3-391.  The computer starts not with a USB key into one of the ports.  When turned on, the computer will display the "Acer" screen, then the screen goes black, then the "Acer" screen is displayed again, and then the screen goes black again.  It buckle like that until I hold down the power button for a hard cock.  Pressing F2 or delete only put the BIOS or something.  The computer starts well W8 and BIOS without anything connected to the USB ports.  I'm still under BIOS v. 2.07, but I don't know if that has anything to do with it, since I can't do the BIOS with USB in. I've never updated a BIOS but I'm decently computer and could probably google my way through it, if you think it will help.

  Everyone knows that or something like that?

  Thank you.

  Well, I'm happy that we're sorted with the recovery disk!

  With respect to the SSD, I found this.

• Info satellite A210 171 what do I need before using the recovery disk?

  Hello

  I have 1 recovery disk that came with my equium, have not used before.
  It says on the back of the envelope of recovery disk 'insert the first diskette.

  I guess there should be a second?

  Also this info I need to provide during the installation process? as serial number?
  All I have a black and white sticker that is on the side of the box, it came in, but it was so long ago.

  I'm having a lot of problems with windows install does not and many others.
  Windows updates do not work either and I tried to correct those, but a clean reinstall of the operating system has been recommended.
  Now, at this point nothing will install because windows setup will not work.
  So I think I wil lhave to try a clean install, but I do know that the cd player works.

  I got a great run on this laptop, little slow today for my needs, but all very good product, purchased in 2007.
  With a clean OS and 4 GB of ram that could last for years, cannot afford a new right now.
  I really tried to avoid using a disc of recovery in the past, as I have never had problems until now.

  Thank you

  Post edited by: sounds

  > I have 1 recovery disk that came with my equium, have not used before.
  > On the back of the envelope of recovery disk, it says 'insert the first diskette.
  > I guess there should be a second?

  I m wondering why you get this disc with your laptop, why? Because I do not have the recovery disk, but I had to create one using the Toshiba recovery disc creator software
  But my laptop is more recent that your A210 might be the reason why you have this drive

  I have created a recovery disk and I needed two-disc DVD, I think it depends on the size of the image file

  > Also what information I need to provide during the installation process? as serial number?
  This is not necessary because your system has already been activated.

  But I recommend you backup your personal data, because the recovery disk would format the whole HARD drive and you will lose the files.

  PS: you should read other threads in product recovery forum!