Can you indicate several virtual private networks in the same Pool of IP on an ASA/PIX?

Similar Questions

• AnyConnect Client - connect to two different ASA virtual private networks at the same time?

  If I am already connected to a remote access using Anyconnect VPN, is it possible to connect to another on a different ASA?

  The option to connect is grayed out until I disconnect one. I don't see any way to launch another Anyconnect session!

  I can connect to one successfully by themselves.

  Neither one is "all traffic" tunneling, just a couple secure hosts for each of them.

  Thank you!

  I think that you can only connect to a VPN at the same time. So unfortunately not possible.

• (I am in China and on the front is partly in Chinese.) I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears.

  Dear Firefox support, I am in China, and the first page of my Firefox screen is partly in Chinese. I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears. I downloaded a new version 5, but the mandarin (and the associated statement bar) still come in Mandarin. How can I download a really English version?

  You can choose your language installation of this list: http://www.mozilla.com/firefox/all.html

• When and how can you synchronize browsers of two computers on the same account after the initial installation?

  I can't find any instructions on how to synchronize Firefox browsing data after the initial configuration is completed and the account is established. Everything that help guard reference section to be put in place, but not how to perform the synchronization operation after installation.

  Firefox syncs automatically, but you can force a synchronization by going to the Tools menu, and then click Synchronize now.

• can you use FaceTime with three devices at the same time.

  I need to be able to have a video conference with three people. A person will demonstrate a product whose other two will check to see that it is OK. Each person is in a different location. I can't find anywhere how to do this. Since it is an event of the time, I won't buy any conference high-end software. We will have a combination of iPhones and iPads.

  N ° but Skype should work.

• What are the solutions for remote use unauthorized computer via a virtual private network?

  Dell Dimension E310.  Windows XP. Professional.   "Media Center". 5 years old.  Stand alone computer.  Unsolicited 'demand' come across the screen for remote access.  Wallpaper, next to the clock, someone downloading of graphics file "Accelerator" without authorization.   Called internet provider.  They claim that they do not deal with the configuration of the virtual private network. Tech said there is more than one device connected to my computer!
  I went to "Computer management" and delete all except myself as a user and the administrator.  Obviously, too late as a person UNKNOWN has defined itself as "NT Authority\Authenticated Users".  Locked computer: would not recognize my password.
  Formatted drive / reinstalled windows.  Able to use the computer for "allocation of 7 days; my computer then froze again.  AT and T Tech indicates that UNKNOWN use of my computer and no recourse.  Are there solutions to the unauthorized use?

  Hello

  I suggest you post your question Forums Technet for assistance on this issue.

  Windows XP Service Pack 3 (SP3)

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Questions of Virtual Private Network (VPN) connection

  OK I did some research on the private network connections, and I have a few questions:

  • Is it true that a connection to a vpn is possible thanks to a transport to a Wi - fi (I want to connect to a network non - bes)?
  • As far as I know, you can connect to a vpn only if create you a vpn manually account via the phone options menu. Is it possible to programmatically create the connection without having to manually create the profile?
  • This connection can be established via a proxy server?
  • Any article or the sample code will be really appreciated

  BlackBerry Smartphones have supported integrated to connect through a VPN using WiFi.  Other transport routes are not supported out of the box for this.

  There is no way to programmatically configure a VPN.  Virtual private networks can be configured on a BlackBerry Enterprise Server and pushed to users.

  BlackBerry Enterprise Server is able to connect through a proxy server.  All of the BlackBerry Java API does not include API to manage proxy communications.

• What book to review Cisco Secure Virtual Private Networks?

  Hello

  I want to prepare for the Cisco Secure Virtual Private Networks (642-511) exam.

  Can someone tell me what is the book of CiscoPress recommended to pass this test?

  Thank you.

  Hello

  Well, Cisco offers a good game that allow you to a tour of the fast configuration of the VPN 3000 Concentrator, logon to:

  Cisco certifications-> games community-> Cisco Secure volunteer

  Sound of running a tour so that your actions are limited, but this will give you an overview of GUI.

  I hope this will help

• Difficulty accessing the virtual private network (VPN) to run on VMware Fusion

  I use Mac OS X 10.5.6 with VMware Fusion 2.0.1.  I am running Windows XP Professional 2002 with service pack 3 and the 5.0.01.0600 Cisco VPN client.  I couldn't connect to my home institution, even if the Mac has no problem making this connection on the same server using a client provided Cisco VPN.

  I tried bridged and NAT connections.   For packed I put the XP network settings to DHCP and of course, he is able to get on the internet.  It detects the VPN server, but the client does not let me enter a password.  Only a single character is accepted.  For the NAT settings, I used normal settings for the XP operating system I internal thought Windows communication would be tunnel by the VPN connection on my Mac.  But I can say that it does not work.

  I prefer to use the NAT connection if possible as this seems the right way to do it and should be more simple.  Any thoughts?

  Jan

  I think that there is a good chance of your router only supports 2 connections to the same VPN at the same time, and that's why you can't have the Mac and the VM connected at the same time.  According to your needs I think you only need one or the other connected at a given time.  When the Mac is connected you can access VPN network resources by placing the virtual machine mode NAT network.  When the Mac is not connected, then run the VM in bridged mode and VPN with only the virtual machine.

  I run 2 Windows XP Pro SP3 machines virtual enough daily, each connected to a different VPN.  My Mac is not connected to a virtual private network (and does not need to).  This configuration allows to my Mac to access local network resources and the virtual machines to do everything that is required through the VPN.  I am running customer Cisco 4.6.x on a virtual machine and a client owner on the other.

• How to connect automatically to a virtual private network in Windows 7 to start upward

  How will automatically connect to a VPN in Windows 7 start upward as as I would like to set up a VPN connection to connect to my exchange account to collect & sync without having to manual when I start my laptop.  Thank you

  If you need to connect to a virtual private network in windows startup and that you do not want to have the thrust of the user to connect or enter the password follow these steps:
  (1) on the VPN connection screen, select 'save this user name and password for the following users.
  (2) select the "anyone who uses this computer" radio button
  3) click 'Properties' on the screen of VPN connection
  (4) on the 'Options' tab, uncheck the box:
  -Display progress while connecting.
  ' Prompt name and password, certificate, etc. ".
  (5) in Windows Explorer, navigate to C:\Documents and Settings\All Users\Menu Démarrer\Programmes\Démarrage
  (6) open a new Windows Explorer and navigate to control network connections
  (7) drag the icon of your VPN connection to the startup folder. This will create a shortcut

  Now at Windows startup, the spear and connect silently.

• How can you create/go ' into a network?

  How to create a network?

  How are you networked?

  How to create a password to a network?

  Hi Gordonlee,

  Welcome to the Microsoft Community and thanks for posting the question. After the description provided to create a network in Windows 7.

  Answering these questions that would help us provide a better solution:

  1. what type of network you want to create?

  2 what type of network you create the password?

  Try these steps and check:

  Method 1:

  Visit this link to create a network:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  For more information:

  If you have three to 4 computers on the same network, and if they are using Windows Vista or Windows 7, visit this link to create a House Group.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

   
  Homegroup from start to finish
  http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  Method 2:

  If you want to add a device to a network, visit this link:

  Depending on the operating system your computer is running, and if your network devices support newest technologies, the steps for adding a device or a computer to the network will vary

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Method 3:

  Visit this link and try the steps mentioned in it to secure a network:

  http://Windows.Microsoft.com/en-us/Windows7/making-your-network-more-secure

  If you have created a wireless network and you want to secure it visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-security-key-for-a-wireless-network

  See also:

  Why should I get my wireless network?

  http://Windows.Microsoft.com/en-us/Windows7/why-should-I-secure-my-wireless-network

  If you want more response information and we will be happy to help.

• You can run VM Clients on different hosts on the same VMServer?

  If I have a VM server on subnet 192.168.xxx.xxx

  I have customers

  192.168.xxx.xxx

  10.xxx.xxx.xxx

  on the same host?    My infrastrtucture is Server ESX 3 Cisco Catalyst 4000 as the layer 3 backbone switch.

  If these are logical networks on the same physical network, you can simply create a new portgroup, or use the existing one.

  If these are physical networks, you must create several vSwitch (for each network) and connect to the physical layer.

  If these networks are the VLANS on the same physical core, you must create several portgroup and tag to each VLAN.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• How do I create standard vSwitches in a HA cluster where the virtual machine switches to the same network?

  I have a lab put in place with 2 hosts 5.5 ESXi and vCenter.  I want to create a situation where each virtual machine must have a dedicated network card.  If I create vSwitchABC on host 1, what should I do on host 2?  Create vSwitchABC on that host too and connect it to the same physical switch?  Which will allow the host 1 failure and the virtual machine to arrive on host 2 on the network because the same vSwitch names?

  Thank you!

  Welcome to the community-Yes, you need to create a vswitch on host 2 has a virtual machine port group with the same name on host 1 connection on the same subnet as connected to the host - 1

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• Can you please tell me how to make the thicker arrows on the Pages.

  Can you please tell me how to make the thicker arrows on the Pages. Thank you very much. There is something incredibly simple to do, but I, having a disconcerting brain, am totally unable to understand. Please please help me. Thank you

  < re-titled by host >

  Try here > Pages for Mac: Add and edit forms