Can you keep programs running even if switch you users?

Similar Questions

• Can I install programs when logged in a limited user account?

  Windows Vista Home Premium, 32-bit

  Vista SP2

  I connect through a limited user account. But if I need to install a program. I seem to be able to do by typing the admin password when prompted

  If I install something, so lets say java and I make it from the account of limited user, but with the password admin, what negative results, if any, may come from it?

  What to remove programs, is it ok to leave the limited with the password for the admin user account >?

  Windows Vista Home Premium, 32-bit

  Vista SP2

  I connect through a limited user account. But if I need to install a program. I seem to be able to do by typing the admin password when prompted

  If I install something, so lets say java and I make it from the account of limited user, but with the password admin, what negative results, if any, may come from it?

  What to remove programs, is it ok to leave the limited with the password for the admin user account >?

  As long as you are in possession of the admin password, you can install, Uninstall, change settings etc, in a standard user account (limited user account).
  There is no (negative) disadvantage of doing.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Why I can't command show running on cisco switch

  On a single switch, I found that some commands because they show execution or copy running-config tftp: on cisco switch WS-C2960X-24TS-L does not work it see more below. How I can use the command then show generally. Thank you.

  Building1_FAA_6F_SW3 #sh run
  Building configuration...

  Current configuration: 100 bytes
  !
  ! No change since the last restart configuration
  !
  boot-start-marker
  boot-end-marker
  !
  !
  !
  !
  !
  !
  end

  ---------------------------------------------------

  Building1_FAA_6F_SW3 #copy running-config tftp:
  ^
  Invalid entry % detected at ' ^' marker.

  OK, so the information you provided in your latest messages confirm that the privilege level you get via telnet/vty is different from the one you get via the console. This is due to the configuration of AAA which applies to the vty ports but not on the console port.

  So if you want the same rules apply to the console port, then you must configure the port console for AAA as well.

  If you don't want these rules then you need to remove the AAA configurations. The best way to remove these is by typing 'no new aaa - model' However, careful not to lock you out of the unit. Make sure you have local accounts with the privilege level 15 and you also know the active password/secret.

  I hope this helps!

  Thank you for evaluating useful messages!

• There is a program running in the background on my computer. It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.

  I tried several times to get a solution to this problem.  There is a program running in the background on my computer.  It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.  My computer has been analyzed by microsoft help and support was in my computer several times, and accomplished yet nothing worked.  Sometimes my mouse freezes every few seconds until it is maddening.

  original title: hopeless

  It seems that you have tried a number of bugs so far without success. Here are some suggestions of what I'm going to try:

  You mentioned a background current program, if it helps:

  Perform a clean boot to determine if background programs interfere with your game or program
   http://support.Microsoft.com/kb/331796

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Don't forget to follow step 7: reset the computer to start as usual in the link above to return the computer to normal startup.

  I would also check the updates for your video card driver. Find the latest Windows Vista drivers for your specific computer model with the support site for your computer manufacturer. Be sure to get the right drivers for your specific version of Windows Vista, for example, 32-bit or 64-bit.

  If your mouse is a USB model, it can be useful to check the latest drivers for your motherboard (chipset) Vista to the support site for the manufacturer of the computer. Also, since you're here you can check for the other updated drivers for your system, i.e., audio, LAN (network), etc.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have the graphics card Intel integrated, you can check on the website below:

  Update utility graphics card Driver Intel
   http://www.Intel.com/p/en_US/support/detect/graphics

  If you have a dedicated graphics card, you will need to check with the card manufacturer, the two most often used are linked below:

  NVIDIA driver downloads
   http://www.nvidia.com/download/index.aspx?lang=en-us

  AMD (ATI) drivers & Software graphics card
   http://support.AMD.com/us/GPUDOWNLOAD/pages/index.aspx

  If you have not done so, see the support site of the manufacturer of the mouse for the Vista updated drivers, known issues with your specific models or known solutions.

  An element that may cause unpredictable problems that are extremely difficult to identify are (live RAM) memory errors, Windows Vista has a built-in for system RAM check utility:

  How will I know if my computer has a memory problem?
   http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  How to use the Windows Vista memory diagnostic tool
   http://www.bleepingcomputer.com/tutorials/using-Vista-Windows-Memory-Diagnostics-tool/

  To perform a more complete test is the use of Memtest86 but is more complex, includes the creation of a CD bootable for the test, it is not really something for difficult burn an .iso file downloaded to a blank disc (available in the free download link) and then boot from the CD.

  Memtest86
   http://www.Memtest86.com/

  I hope that something of the above can help lead you to a solution.

  Kind regards

• I have indesign CS5.5, no subscription. I need to try a new version, but I don't want it to replace my old version. If you are running a trial version, you can always keep your old version? I don't want to start my trial unless I kno

  I have indesign CS5.5, no subscription. I need to try a new version, but I don't want it to replace my old version. If you are running a trial version, you can always keep your old version? I don't want to start my trial unless I know that I can keep the other oldest. Thank you

  Yes, you can run the test without changing your existing installation of CS5.5.

• Data Execution Prevention keeps popping up even after controlling for him. How can I stop this?

  So, I turned off data execution prevention for Windows Installer, because I installed a game and he appeared always, but it keeps appearing, even here, and it is disabled! What should I do?

  original title: DEP keeps appearing!

  Hello

  · What is read the popup?

  · What service pack is installed on the computer?

  Data Execution Prevention (DEP) is a security feature that can help prevent damage to your computer from viruses and other security threats. Harmful programs can try to attack Windows by attempting to run (also known as execute) authorized the code from the locations of memory system reserved for Windows and other programs. These types of attacks can affect your programs and files.

  DEP can help protect your computer by analyzing your programs to make sure that they use the system safely memory. If DEP notices a program on your computer using memory incorrectly, it closes the program and notifies you.

  A detailed description of the feature Data Execution Prevention (DEP) in Windows XP Service Pack 2, Windows XP Tablet PC 2005 Edition and Windows Server 2003: http://support.microsoft.com/kb/875352

  Also run the tool diagnostic memory on the computer, you can check the link below: Windows Memory Diagnostic: http://oca.microsoft.com/en/windiag.asp

• ZBook17: How can I keep my laptop switch mode 'sleep'

  How can I keep my computer to switch into mode 'sleep'. At the moment, the screen turns off in a minute about. I adjusted all the settings of power, but nothing seems to help.

  I regret that none of these steps seems to fix your problem, it's frustrating. Here are some more that you can try to see if the problem is resolved or changes in some way:

  1. Installation/update antivirus application and definitions, then run a virus in Windows scan check that no virus or malware
  2. Disabling hybrid sleep in Windows
  3. Disabling the requirement for password during the resumption of the mode standby
  4. Try a different power source

  If you need instructions on how to perform these tasks, see the following document:

  http://support.HP.com/us-en/document/c03383935#AbT2

  Thank you!

• Re: Screen keeps going blank even if Equim M70 is still running

  My screen keeps going blank even if the computer is still running.
  Last night, I managed to make it work again for 20 minutes while it was not plugged in, but as soon as it was plugged it erased.

  Today, even when he was not plugged in after 20 minutes the screen starts to Flash and then deleted again.

  Any help?

  > Today, even when he was not plugged in after 20 minutes the screen starts to Flash and then deleted again

  Hmmm... to me it looks really good mine a bit a hardware problem if the screen starts flashing, then erased.
  Maybe there's something wrong with the screen itself or with the other party as FL inverter.
  FL inverter is responsible for part of the screen backlight control.

  In my opinion, these two parts must be checked!
  But I doubt you can do that without additional aid by the ASP technician and so I recommend to ask a technician for assistance.

  Concerning

• I like to keep a true-false program run

  Hello!

  I'm new to labview, and I began to practice. I would like to create a small program that generates a random number from 0 to 100, and the user can enter a number of his choice, then the program says if it is equal or not. I'm almost done with it, my problem is that I run the program, it generates a number, indicates if the number in numerical order is equal to the random number, and it stops. So if I change the number in the control, nothing happens, but if choose to run the program continuously, it generates numbers of every moment.
  So my question is, how do I keep the program running, without changing the random number, so that the user has time to enter its own number?
  Thanks in advance!

  I joined my program.

  You need to place the code in a while loop. Add a stop button so that the user can tell the program when to stop.  Also put a wait function (ms) in the loop with 100 to 200 ms delay if the loop does not turn millions of times per second while you wait for the user to enter a number.

  When you get more advanced with LabVIEW, you want to learn how to use the structure of the event for programs like this.

  Lynn

• How can you know what drivers and programs are essential and those that can be deleted without harming my computer?

  Original title: completely clueless

  I'm totally clueless when it comes to computers, but I try very hard to learn. I am using the help section a LOT, but I can't seem to find an answer to the only thing that makes me crazy. How can you know what drivers and programs are essential and those that can be deleted without harming my computer? I have a very basic net accountant I learn on before I screw up a portable more expensive and I do a cleaning on my C and D drives to improve performance because it runs so slow but it tells me I have the drivers who slow down Windows. I would greatky appreciate any assistance from someone who has the patience of a saint and is willing to take the time to explain it to me, in terms laymans. Thanks in advance

  Drivers: you should know what you bought (in your machine) and what * you * want out of it.  If you want stability and things work properly - let alone the drivers.  If you want more performance check (and other games) in the drivers of motherboard chipset and video network from the manufacturers Web site... For more stability stick with the OEM website (HP, Dell, Lenovo - the assembler of the whole machine) and slightly more performance/push the limits (even if they want to work too - so still some stability) - access to websites of its components manufacturer.

  With regard to the programs: you can decide what you use and do not use.  If you are not sure, look it up (Google) or ask.

• Whenever I try to open the App Store it will remain open for more than 30 seconds before the close. Or it just restarts as soon as a home screen scroll above him. I can't keep it open long enough to even download an application.

  Whenever I try to open the App Store it will remain open for more than 30 seconds before the close. Or it just restarts as soon as a home screen scroll above him. I can't keep it open long enough to even download an application.

  Hello monorayfromportland,

  If you are unable to connect to the iTunes Store on your Apple TV, take a look at the troubleshooting steps below:

  If you cannot connect to the iTunes Store
  
  

  If you cannot connect to the iTunes Store on your Apple TV (4th generation):

  1. Make sure that your date and time are correct. Go to settings > general > Date and time.
  2. Check if your Apple TV software is up-to-date. To check the updates, select settings > system > software updates > software update.
  3. Make sure you have an active network connection. Go to settings > network.
  4. Check to see if other devices, such as computers or tablets, can connect to Wi - Fi and access to the Internet.
  5. Reset the wireless router by turning and then again.

  Take care.

• HP Jet 8: 8 HP flow can't keep not fresh, takes place at 0% even when it is plugged

  My HP flow 8 tablet has never held public office.  I leave it plugged in all night and the next day it is fully charged, but the charge only lasts 2 hours at the most, even if it is plugged I use it all the time.  He goes down to 0% and turns off.  I put aside for several hours to recharge.

  I'm looking for another Tablet, but the flow 8 HP serves all my needs except that it only lasts 2 hours before going to 0% while I use it, even if it is plugged in all the time.  I really hope to solve the problem, rather than having to buy a new tablet.

  Any suggestions?

  If you hold the low volume button while powering it will enter in the BIOS boot menu, you can press F2 to run diagnostics and there is a component for the battery test.  I think you are saying that the screen turns off after that two hours than even when the charger is plugged in, it does not seem that should happen.  If you have not already, try another charger.  If you plug the USB on another computer, which will allow to load also.  You can update the BIOS if you have not already too.

• Added a counter which keeps the total number of times where a loop has run, even if LabVIEW has been restarted.

  Hi all

  I am writing a VI to measure the data and insert into a database. The measures are controlled by a loop that runs once per minute. I want to give a unique to each measure identification number and store it too much in the database.

  To do this, I want to add a counter to this loop so that I can count the number of times that the loop is executed in total. It is, even if the VI, LabVIEW or even e PC is restarted, I want the counter to track the number of executions. If say the Edeka runs twice and then the VI is stopped and restarted, I want the number following on the counter to be three.

  Does anyone have an idea on how to do it? I'm gratefule for any help!

  Clara

  A suggestion. Can you write the last counter value in a txt file and read it all by running again the vi?

• Where can you find the dialogue or the button/box RUN?

  Where can you find the dialogue or the button/box RUN?

  What version of Windows are you talking about?
  Windows XP run must be visible in the right column of the start menu, but it is possible that your administrator disable its visibility.

  under Windows Vvista and 7 no longer has an execution command. Instead, all commands typed in the search programs and files (at the bottom of the start menu) box behave as if they have been entered in the dialogue of the race.

  for example, type "cmd" in the search programs and files, and then pressing on enter will immediately launch a command window.

• Should I delete the programs of 2004? How can you know what is safe to delete?

  Original title: remove programs

  I think I have a virus.  I see on my computer a few applications with and installed as of 2004.  The computer was purchased in 2007.  When I run it in safe mode, it works fine and all applications have a date of 2007 or newer.  Should I delete the programs of 2004? How can you know what is safe to delete?

  Hello

  This is not an indication of malware. Could be those are placed on the
  computer by the manufacturer of the system and that was the date that firstly, they prepared their
  for massive installation, or if they did not set a date and be used arbitrarily.

  =============================================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.