Cannot access bios after installing the video card

Similar Questions

• long beeps after installing the video card

  Hello

  I recently bought a HP 500-223w.

  I wanted to install a power supply a video card.

  Here's the problem: everything works fine without the installed video card.

  If I install the video card then at startup it gives me a series of long beeps.

  I turned it off after the long fourth beep assuming they would UST go on and on.

  The power supply is more than enough to power the video card.

  The video card should not be bad, because I just moved it from another system. (system currently does not, bad mobo)

  I was wondering what the infinite long beep on startup?

  Thanks and regards, TJames.

  Hello:

  Product for your PC specifications indicate that it comes with Windows 8.1.

  To install a video card no HP on PC shipped with Windows 8 or 8.1, you must change both settings of the BIOS before installing the card.

  Please see this document for the BIOS to change settings...

  http://support.HP.com/us-en/document/c03653200

• Cannot access internet after installing the latest Windows Update

  * Original title: Question access to the internet after you have installed the latest update

  Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

  I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

  I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

  Can you please tell how can I install the update it will affect my ability to access the internet?

  Hi Victoria,.

  Please help me with the following suggestions:

  1. using modern Internet Explorer user interface or Desktop Internet Explorer?
  2. your computer is in a cable or wireless internet connection?

  3. What is the number of the kb article that is causing the problem with the internet after installing the update?

  4. are you referring to Windows Update (KB2919355) 8.1?

  Windows Update: Frequently asked Questions see (how know what are updates
  been installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Click on the link below to troubleshoot if the internet explore does not work:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

  I hope this helps. Answer please if you have any additional questions with Windows.

• Help! I lost his PC after installing the video card. The software installed its HDMI audio driver. How can I get sound on PC speakers?

  To watch TV on the big screen, I installed a video card with HDMI output. (Sapphire Radeon HD6450)
  The software installed its own device driver (AMD Hi definition audio) but disabled my PC speakers (and the headphone jack).
  (The sound is displayed on the TV very well, via HDMI, in which I can not type)
  I tried to re - activate the driver Legacy in the management of the computer, but the field enable is gray.
  The PC is a hp Pavilion a1630n
  It is essential for me to get a sound on my regular speakers to work on the PC.
  How?

  Hello

  You can check this link:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Cannot access Internet after installing the latest Windows updates

  Hello

  updated the last windows update and now can not access the internet even if I said I'm on internal appreciate any help in this matter.

  Have reset the laptop to an earlier date and no problem, but as soon as I download the update of windows, no internet access

  " Original title: blocked internet access"

  Hi Eugene,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the type of internet connection you use - wired or wireless?
  2. Do you get any error message when there is no internet access?
  3. What is the number of KB of the update, after which the internet disconnects?

  [To view your history of update:]
  a. Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on parameters, typing or clicking on Change PC, then type or by clicking on update and recovery.
  [ b. press or click on see your update history.]

  The question could arise if the specific update makes changes in the Windows network properties and the update package has been damaged. Other important reasons include the firewall from the security software, third-party software conflicts etc.

  In order to diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Method 1: Troubleshooting of connection Internet run.

  a. press the Windows key + W key on the keyboard.

  b. type Troubleshooting in the "search" tab and press enter.

  c. click show all on the left panel.

  d. click on Internet connection, will new popup window.

  e. follow the instructions on the screen.

   

  Let us know the results performing the Troubleshoot utility.

  Method 2:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X.
  2. Click prompt (Admin).
  3. Please enter the following commands and press ENTER after each one.
     NETSH INT IP RESET
     IPCONFIG/FLUSHDNS

  Restart the computer to check the issue.

  If the problem persists, refer to the following method.

  Method 3:

  Temporarily disable the security software and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most

  cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Vista hang up on start up after installing the VIDEO CARD of 680 GTX

  I have installed a 680 GTX graphics card in my system, now Vista will not start in normal mode, it crashes after loading bar, leaving only
  a white screen with a mobile mouse pointer. I can boot into safe mode, try uninstalling and reinstalling the latest drivers for the card, without change.

  I solved the problem by doing a restore of the system in safe mode, remove the old drivers with Driver Sweeper, then reinstall the drivers again. The card works fine now.

• Try to install the video card. Integrated graphics card does not! (PE T110 II)

  Hello

  I tried to install a video card in the x 16 slot PCIE (ASUS Radeon 5450 Silent). I read on the Board that this video card has worked for others with the T110 II.

  I turned off the computer and unplug the power cord.

  I installed the video card in the x 16 pcie slot.

  The VGA cable is connected to the integrated VGA.

  When I turn on the computer, my monitor receives no signal. I tried to access the bios to change the settings of the embedded video controller of standard to distributed. Unfortunately, I am unable to see anything on my monitor, it gets no signal. If I try to connect the vga graphics card it shows a screen black nothing else.

  The integrated graphics card works again once I remove the location PCIe video card. The integrated graphics card does not work while the video card is connected.

  I 2.8.0 bios version.

  I can hear the computer starts, but I don't see what is on the screen, I'm not sure if the bios is starting.

  Any help would be appreciated.

  Thank you

  Use the embedded video.

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• 6000 pro SFF: installing the video card on 6000 Pro SFF with BIOS 2.03

  I am in train to install a video card in my 6000 Pro SFF and find that when the new video card is inserted, neither she, nor my tip on video card working.

  Assuming that their must be a way to get the card to operate in the BIOS (2 786 v2.03), I'm going to the "Advanced" tab and find "PCI devices. Underside of the mentioned deviced is 'Controller VGA Intel'. Choice for this controller are the IRQ = 5, 10, 11, or disabled. Apparently, the default value is 5 because that's how it is now set.

  A little scared that if I put "Disabled", which will be not only the new video card does not work, but the video card on the motherboard won't work, too.

  Y at - it anyone out there that can tell me if you change the VGA Intel controller to disabled is the right way to install the new card, and that I only put my computer in a heavy paperweight by.

  You are welcome.  Thank you for the additional information.

  I don't think you have to do anything in the BIOS.  At least, I wouldn't do anything, until you have improved the PSU to see what is happening.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Does not start after installing new video card

  Hello, I have a desktop H8-1284, and the video card went a few days ago. So I bought a video card Geforce GTX 650, and after installing the card and the computer starts, it hangs just at the start of the HP logo screen. So I put an old geforce 8800, and she starts without a problem. When I try the new card Geforce GTX 650, the same thing, just hangs at the splash screen.  I checked the bios and it doent seem to be something there that can help wouild. My diet is 460 w, and the new map needs of 400 w, any help will be greatly appreciated

  Hello

  Most of the cards PCI-E 3.0 are retro-compatible with the PCI-E 2.0 slots.  However, in order to get the PCI-E version 3, you must use a processor Ivy Bridge.  Look at these specificationsfor a typical NVIDIA GTX 650.

• install the video card

  How can I disable integrated/onboard graphics on my hp 3500 pro using windows 7.  my system does not show a boot option disable security

  Most HP desktop PC BIOS turn off the graphics card integrated automatically when a video card is installed.

  UEFI PCs are a very different breed. Upgrade one video solution to others which specifies the option HP is quite difficult because of the strict limitations that the BIOS placed on upgrades.

  Yours is a work PC and not a class of consumer product.

  The NVIDIA GeForce GT635 2 GB and AMD Radeon HD8570 are only two video cards eventually sold with the PC model you own. Low profile cards models are likely to be the best way to go.

• Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

  After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black bands or model checker color scattered. It occurs especially when the child (like the Download Manager) passage of another application for Firefox or Thunderbird or when to switch to a window for Firefox. It affects the entire application or only some rectangular (region clearly who was redesigned due to change of application). Then repaint (such as switch between Firefox tabs) usually solves the problem. This is just visual, the behavior is not affected. The problem never happened to any other application so far. Any ideas? Any who have experienced the same problem? Thanks in advance.

  Zbynek

  P.S. Here's the screenshots for the two problems:

  http://astrofoto.euweb.cz/tmp/black_stripes.jpg
  http://astrofoto.euweb.cz/tmp/color_boxes.jpg

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver that corrects these problems.

• Cannot become administrator after installing the drivers NIVIDA

  NVIDIA had administrator with "updatususer" and me standard user due to its update installed with the program. There are 2 others who are more residential standard which is also the administrator. I tried every 'net user administrator' I could find on youtube. I even tried one that makes you an administrator on a computer group. no luck.  There was a program on google when I tried to download it I was stuck saying I don't have permission to install it. others said something about installing another driver for the nvidia card.  It is another thing that I'll try if you can not help. I will install windows xp and reinstall windows 7 on top of that after removing the graphics card from nvidia, hoping that it will remove all the UNWANTED installed them. I know it's a lot of work and time. I am at a stand still don't know what to do.

  I tried restore could not said it must be an administrator. everything I tried says need to be administrator. I'll remove the graphics card and reinstalling windows 7.

  Your action is a bit premature. There are several other methods to call the system restore, for example pressing F8 on startup to start the machine in Repair Mode.

• Cannot access BIOS after own Win 7 installed on the new HD

  The machine is HP Elite E9240F. Here's what I did.

  1 replace the plant HD with faster player - went well

  2. clean install Win 7 on new drive - activate - went well

  3 reinstall the disc supplied with the box in the first place & format - went well.

  Now everything starts fine, and loads of Windows. NO problem BUT I cannot access the BIOS more. Not that I need at this time, but I would like to know that where I did it, I could.

  Repeated F1 or F11 at startup pressure will produce the black screen for the Windows Boot Manager.

  I removed the CMOS battery and retried - same results. I can access the blue screen when I select the boot sequence by pressing ESC but never can I go back in the system BIOS.

  Thoughts?

  All these systems are a bit different but F10 to enter the bios to me.  If it is your PC then F10 to enter the bios: http://support.hp.com/us-en/document/c01925486

• The program monitor is black, no video after installing the new card chart

  I bought a graphics card PNY Nvidia Quadro 2000 a few days ago, and since that it is been installed, I was unable to watch videos in my program, the source or the same reference monitor.

  Similarly, if I designate one of my monitors soley for video playback, the screen is all black, and as the timecode to advance my calendar I only hear.

  My project is using "The Mercury Playback Engine GPU acceleration" for first Pro CS6.0.1

  I went to use a graphics card with two graphics cards and installed a third-party monitor. I spent these days around trying everything I could think of, I even uninstalled and reinstalled the first.

  Hardware specifications:

  Windows 7 ultimate (64 bit)

  HP Pavilion h8-1230z

  AMD-FX8150 Ghz 8 core processesor 3.59

  16 GB OF RAM

  PS 600W

  EVGA Nvidia GeForce GTX 550Ti

  PNY Nvidia Quadro 2000

  I use a PCI x 16 for the Quadro 2000

  I use a PCI x 1 adapter w / x 1 - x 16 slot for the 550Ti

  Could be the problem?

  More information

  Vectorscope, all scopes, YC - waveform Display modes all work.

  I downloaded the latest Nvidia drivers for both of my cards.

  I did not receive messages error or had problems in After Effects CS6, as video playback works fine in my other adobe applications.

  Since you have very recently purchased the Quadro, try to return it and replace it with a nVidia GTX 670. Approximately equal to the price, but the GTX 670 is much faster and it supports up to 4 monitors, so you can remove the Ti 550 and sell.

  I guess your problem is configuring dual video card that use different drivers. Double video cards is possible, even if PR can use the main map, but drivers must be the same for both cards and this is not the case.