Cannot access computers running Windows XP Pro on wireless network.

Similar Questions

• Connection cricket MSGM8 phone USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, but cannot find drivers

  Original title: badminton MSGM8 phone to the USB port on my laptop to pis draft.exe

  connecting a phone to cricket MSGM8 USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, trying to locate the software for Qualcomm CDMA Technologies MSM, but can not find the drivers, any fix?

  Hi ChristopherStout,

  (1) what is the complete error message you receive?

  (2) is limited only to Cricket MSGM8 phone?

  Method 1: Run the fixit available in the article below and then check if it makes a difference

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 2: If you provided drivers\software disc from the manufacturer of the computer, go ahead and install it.  You can see the steps outlined in the article below

  How to troubleshoot unknown devices listed in Device Manager in Windows XP
  http://support.Microsoft.com/kb/314464

• My computer with Windows 7 Home updated for Firefox v34.0.5 but my two computers that are running Windows 7 Pro have not yet updated beyond Firefox v34.0. Something wrong?

  See info above. I re - run the update process at least 10 times on the two machines running Windows 7 Pro (most recently this morning), and whenever the two machines running Windows 7 Pro (one is 64-bit, one is 32-bit) say that Firefox v34.0 is "up-to-date". I checked Mozilla.org, which States that Firefox v34.0.5 was released in mid-December, but he said nothing about whether this update was only for some OSs. I also ran several scans antivirus from different vendors on two machines running Windows 7 Pro and all scans show no problems.

  Please advise is there are different versions of Firefox for Windows 7 family or Professional Edition, or if I'm having a problem. If I'm having a problem, please tell us how I can correct.

  We changed how updates were deployed to a test, that's why you were probably the 34.0.5 on a computer and 34.0.0 on the other. The only difference between them is that 34.0.5 defines yahoo as the default search. You don't need to worry because of the different versions (who both were released at the same time BTW)

• Cannot install KB974674 (restoring backups made on Windows XP on computers running Windows 7)

  I tried to install KB974674 (restore backups in Windows XP on computers running Windows 7) on my laptop with Windows 7 starter (in Dutch), then a pop up shows saying there is an error, unspecified, 0x80004005. I just want to put the backup I did on my XP computer files (the backup contains files with the extension .dat), with windows on my new laptop backup and the backup on my external hard drive does not appear in the backup of windows on my laptop. I thought that this update would help me.

  The real solution is to use Windows Easy Transfer.

• Satellite A200 - 1 3 - readers of the need to run Windows XP Pro SP3

  Hello

  I need help to find the disks required to run Windows XP Pro SP3 PT - PT on my Satellite A200 - 1 3.

  Due to the extremely poor performance of Windows Vista, I did a downgrade of the operating system and I've managed to install the SP3 Windows XP Pro PT - PT, but some components does not (Ethernet, network, WiFi, Audio, Modem, video VG compatible) as they shoud due to the lack of correct readers for XP.

  I tried to find the spec of my machine then trying to find the right drive in the components manufacturer sites in the Toshiba site, but it turns out be a mission impossible because it seams to have a detailed description on all machines A200 except A200 - 1 3.

  If you can help me on this topic, I would be grateful. Thank you.

  Why you don't use an advanced search option here in the forum to get similar questions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57916

• BIOS 4.03 for workstation xw9400 running windows 7 pro 64-bit

  None does not know where and how can I update the bios on a running windows 7 pro 64-bit xw9400 (HP does not list in the drivers section?) currantly only got bios V3.13 and im sure it should be on atleast v4.03?

  see you soon

  Oh well all good now, worked to followed her the road to iso cd and managed to update the bios to version 4.03.
  
  Once again thanks for the support...
  
  Concerning
  Chardsky...

• need drivers pci for toshiba satellite M45-S2653 running windows xp pro 2002 SP2

  need drivers pci for toshiba satellite M45-S2653 running windows xp pro 2002 SP2

  Find it here:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=product%20Support

  Good luck.

• I am trying to install a Lifecam HD-3000 on my computer running Windows XP - Pro

  I am trying to install a Lifecam HD-3000 on my computer running Windows XP - Pro. I am getting passed for pillar to post saying updated software is available, which, when I download it, informs me that I already have a new update on my computer. Anyone knows how I can get the mended thing to work?
  The error I get sent it to me to HTTP://support.microsoft.com/kb953691 which is apparently nonexistent. Since the MSN page, I see that many others have the same problem. Is there a solution?

  Kay

  Hi Kay,

  1. from which site are you trying to download? Or the computer prompts you with the message you are trying to download?

  Follow these steps and check if the problem persists.

  Step 1:

  I suggest that you download and install the drivers from this link.
  http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-3000#support

  Step 2:

  Reinstall the mouse drivers, and check if the problem persists.

  Follow the steps in this article.

  http://support.Microsoft.com/kb/283658

• Is there an ETA for carrying portable computers of Windows 8 Pro?

  I am looking for a new laptop and I want to know:

  Is there an ETA for carrying portable computers of Windows 8 Pro?

  Official launch of Windows is on October 26, 2012. You can have notebooks with WIndows 8 from this day there.

• Key ESC Office keyboard does not work on desktop running Windows 7 Pro 64 x

  Key ESC Office keyboard does not work on desktop running Windows 7 Pro 64 x

  Now, it's a boring, which several other users have reported under different threads. Because I couldn't find a post with quite similar symptoms, I made my own topic.

  I am running Windows 7 Professional 64 x on an old one (Intel Quad-Core, 4 GB RAM, 524 GB HDD - in case, for reasons unknown to me, someone needs to know it...) , DellXPS system. Not more than a few weeks ago my home button keyboard unresponsive on this system.

  I did a lot of troubleshooting, but these measures have been carried out:
  * Tested keyboard on the other system, touch ESC WORKS on the other system
  * Reinstalled keyboard and USB drivers on the XPS system, ESC key does NOT WORK on the XPS system
  * Connected to a never-before-used USB keyboard, ESC key does NOT WORK on the XPS system
  * Opened and cleaned the keyboard, tested, Escape key WORKS, Don't DO NOT WORK on the XPS system
  * Tested in various applications: Desktop (Esc will close the start menu), Photoshop, Vegas, Notepad, games full screen OpenGL,Escape key does NOT WORK on the XPS system
  * Google for possible solutions, none found...

  Note: Highlights show where the ESC key does not work. I am troubled by the XPS system.

  In case you missed it my list of troubleshooting steps, the ESC key works on another computer of Windows 7 system.

  I have to still garble my self through the registry in the hope that someone might have an idea of the steps to follow before I lose a day to see the things that I honestly know squat. Please help if you can; What could be the issue/common application that separates this key in the Windows world and how could I solve this problem?

  Thank you in advance!

  For reference,.
  No major changes have been made since the keyboard unresponsive with the exception of:
  Updates to FireFox (including modules Ad-Block Plus, NoScript, which have also been updated).
  Windows Update
  A 10.x MB World of Warcraft patch/update on a keyboard AFTER week unresponsive

  Already installed the patches StarCraft II and World of Warcraft, which none touched my keyboard to my knowledge. I finished almost all of StarCraft II and had no problems...

  I know it's a bit old, but I was living the question myself.  Thought I had found the problem and it was fixed but then it happened again.  Came to find out (by closing a program and test the ESC key) it's because Photoshop.

  With the help of Photoshop, which could match the case you mention.  Not only that but I did a search ('ESC' does not not Photoshop) and stumbled on some answers/solutions workaround for it.  One is to use SHIFT + ESC ESC does not work.

  Hope this helps someone.  I fell it using my original research ("Windows 7" BSE "ESC" keyboard does not) and know that others are likely to see.  If you have not already learn the cause, in the year + since your original message, then voila.

• Update Windows 7 pro (10 users) network January 1, 2013. Now, for more than 4 users connect an access across the network apps stop apparently. Any thoughts?

  Update Windows 7 pro (10 users) network January 1, 2013.

  Now, for more than 4 users connect an access across the network apps stop apparently.

  Any thoughts?

  Hello

  Your question is beyond the scope of these forums. Please ask your question in the following forum.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Concerning

• Running Windows 7 Pro, 64-bit and all empty and none of them exe icons only opens.

  I am running Windows 7 Pro, 64-bit Service Pack 1 installed and when start I had dozens of white on the bottom bar task icons by saying that no files have been associated to the program.  I hit cancel and cancelled all out.  All the .exe icons (shortcuts) are empty, all the program under all PROGRAMS icons are empty, and nothing does not open.  My documents on the desktop will BE open in word or excel, but not from the shortcut.  The regedit.exe will work not or open.

  Does anyone have a solution?  It happened yesterday, I restored to 10 October and my computer worked, so I turned it off.  This morning when I turned on he did it again.

  Thanks in advance for you help.

  Jim

  You have changed the exe file association.

  Follow the instructions here and getting on for exe. http://www.dougknox.com/XP/file_assoc.htm

  Note: You have posted to a forum that is completely different to your question/problem category. Your question has been moved to a forum category that matches it's better.

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows

• need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Website of punch comes in properly next tab sites just wai

  need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Web site fisting comes in following correctly sites just waiting for the website tab help

  If it works in Windows safe mode, then you have a problem with other software, maybe a security software or a system driver that runs on your computer.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• "Use Windows to configure my wireless network. is missing

  Hello:

  There is NO connection of Belkin Wireless adapter flashes to pick up the signal.

  Whenever there is no link, I need click Belkins utility in the system tray at the bottom to obtain, however, it keeps not connected and takes only 10-20 minutes.

  Moreover, I found when I clicked, Belkin icon > properties > network and found there is no "use Windows to configure my wireless network.

  How do I fix this problem?

  Thank you for your help in advance.

  Hello

  I suggest to follow the steps in the below links and let them know the State of the question.

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  To set up automatic wireless network configuration:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  For more information:

  Follow the steps in the link to configure the adapter Belkin Wireless below:

  http://www.Belkin.com/support/DL/p75451_f5d8053.PDF

  If the problem persists, then I suggest you to contact the Belkin Support:

  http://www.Belkin.com/us/support

  I hope that the information above helps you.