Cannot access microsoft or windows update... message reads as follows: 403.u are forbidden: access is denied. I have windows XP pro and a Trojan horse

Similar Questions

• "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a Web site to send a msg email on Outlook/microsoft office 2003

  "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a website to send an email on Outlook/microsoft office 2003 Vista OS msg. My laptop came with Microsoft Office 2007 TRIAL version, but I already had Microsoft Office Pro 2003, so loaded on when I got it almost a year ago. My trial expired months ago... but never uninstalled cause 2003 worked. Then I wanted to do something in WORD and kept pulling up the 2007 trial and was confusing, so I sent the 2007 trial stuff to recycle bin, but not yet the uninstall. Since then all of a sudden I started to get this error msg. I can open OUTLOOK very well... BUT I don't even use OUTLOOK at all. I send from comcast.
  1. How can I get rid of this error?
  2. does anyone know how I can get my comcast open up when I go to a website to webmaster option instead of defaulting to outlook? And I already checked, "set as my default" is NOT enabled in outlook.
  Help, please!

  Hello

  Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Is Windows 8 Pro and Microsoft Office 2010 license Transferrable to new PC (during the withdrawal of the old PC)

  Hello

  I had bought Windows 8 Pro as part of the upgrade offer in 2012.

  My current desktop PC gives signs of imminent failure. So I intend to mount my own PC and all ignoring the old one.

  My question is if I can transfer the current licence to the new office.

  What is the procedure for the transfer of the Windows 8 Pro and Microsoft Office license to new PC?

  Thank you and best regards,

  UNNI

  Yes, you can transfer the two as long as they are copies of the retail sale and do not come pre-installed on the machine.

  To waive the license of the machine, you can just format the machine or uninstall the license of Windows 8.

  To proceed to reinstall Windows 8 on the new computer and restart phone.

  Please note:

  To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.

  You can reinstall of Office 2010 and also reactivate by phone:

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

• When Windows 8 Pro and Office2013 will be at Microsoft Action Pack subscription

  When Windows 8 Pro and Office2013 be to Microsoft Action Pack subscription?  Thank you.

  Windows 8 Pro should be available in.

  Regarding Office 2013, probably in mid-November.

• I need number phone to call microsoft for windows 8 pro for new machine windows easy transfer 8 home

  I need number phone to call microsoft for windows 8 pro for new machine windows easy transfer 8 at home. Victory 8 pro is a desktop computer that is no longer used and I just bought new laptop which has win 8 64 OEM. Can I do this?

  Press the Windows key + X

  Click System

  On Windows, click the link:

  Get more features with a new edition of Windows

  Click on the "I already have a product key link.

  Enter your product key and you will be promoted to the Pro.

  Go to reactivate by phone:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• I have Windows 8 Pro and I can't open my apps

  Original title: Windows 8 Pro

  Hi, I have Windows 8 Pro and I can't open my apps.  Whenever I try to open them, they go to the my office and stays on the bottom menu bar.  Is it possible that I can uninstall and reinstall Window Pro 8?  I am very frustrated and I tried to solve this problem for over a month now.  URGENT! Help!

  Hi Kamille,

  Thanks for posting the request in Microsoft Community Forums.

  It must be hard when things do not work as expected. We will analyze and identify the cause of the problem. Please answer a few questions to refine the question.

  1. What are the steps you tried to solve the problem?

  2. do you receive any error messages?

  3. What is the brand and model of the computer?

  4. deal with any issue when running Windows updates? You try to upgrade to Windows 8.1?

  5 is this problem specific to any application or applications behave the same way? What happens when you open the store?

  It is recommended to ensure that Windows Update works correctly so that the operating system is functioning normally.

  This problem normally occurs when there is some incorrect settings in applications. You can follow the procedure described here and check the results.

  Method 1:

  I recommend to run the troubleshooter app and proceed as described in the article.

  Solve problems with a soft
  

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  Method 2:

  You can scan SFC to check if there is any corrupt system files.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Response with status so that we can help you.

• video resolution down during or after the logon Windows 7 Pro and Ultimate

  After cranking up the logon screen change video resolution of 1920 X 1080 to 1280 X 720 and I have to reset resolution then everything is OK until the next time start us

  2 of my units make this one with 7 ultimate pro and 1.  With the help of Acer X233H
  I removed the stitch as suggested by some, but nothing helps!  Help, please

  Hello
   
   
   
  Remember to make changes to the computer before this problem?
   
   
   
  Follow these steps:
   
  Method 1: First of all, you can try to update the latest driver for your graphics card video card and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
   
   
   
   
  Method 2: As you are facing this problem on Windows 7 Pro and Ultimate, it might be possible that a program that is installed on both the computer cause this problem.
   
  To help solve the problems, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  If the display works fine by disabling all third-party services, you follow the steps in the article to elimate the service that is causing the problem.
  Note: after a repair, put the computer into normal mode.  Follow the instructions in this article.

• Installed Windows 7 Pro and now its saying my key is not genuine?

  I installed a new copy of Windows 7 pro and after a few weeks he started telling me that my key is invalid.

  I ran your tool MGAD and received the following information:

  Validation code 50

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Windows 8 pro and windows 8.1 pro 64 bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller

  Hello

  I have a HP Pavilion GP A10 AMD laptop 2313-AX. The latest drivers from the HP website for windows 8 pro and windows 8.1 pro 64-bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller appear limited in my laptop, but in the same laptop connectivity when I start in Windows Server 2008 R2, both LAN and wifi works very well.

  Are there drivers available updated 2013 for these two hardware devices as dated?

  Are there universal or generic drivers that can act as a workaround?

  If so, please give me the URL for the same thing.

  Kind regards
  Sriram.

  Hi Steve,.

  I came across similar issues where the driver manually enabled users to solve the problem. Uninstall the current network adapter drivers and manually install drivers that you previously downloaded.

  a. press Windows key + R key, type devmgmt.msc, hit the Enter key to open the Device Manager.

  b. expand network adapters, right-click on the listed network adapter and select Update driver software.

  c. click Browse my computer for driver software, click Let me pick from a list of drivers for devices on my computerand then click on disk.

  d. in the dialog box to install from the disc, click Browse, locate the drivers, and then click Open.

  e. follow the steps described in the DeviceName update driver software dialog box to update the driver.

  Try these steps and let us know the results.

• Windows 8 pro and windows desktop tile 7

  I use Windows 8 Pro and whenever I click on a tile to program, it goes to the Windows 7 Desktop before opening.  After I close the program (e.g. Microsoft Excel), I have to manually return to the screen of windows 8.

  Thanks Ronnie, I got the Start Menu to understand now, but why it the screen of Windows 7 has to come.  When I click on a program in Windows 8 why cant he opened in 8 and close windows in windows 8 instead of opening on win 7 OS?

  Hi Mary

  It is difficult to explain.

  The Windows 8 Apps, such as the start screen and other applications, such as calendar, weather, maps and all the other apps that you install on the Store are programmed differently legacy Desktop Apps like MSOffice apps, Panel, a multimedia player, Manager of files, etc.

  When you open an application of Windows 8, it opens in a space full screen with none of the standard components that you see in a legacy windowed application, such as the 3 buttons on the top right (Minimize, Maximize, Close), a title bar or the components normal windowed app.

  A desktop application should open in a space with windows, which is represented by the office, so when you click to open a desktop application, you can see the desktop briefly it opens.

  The desktop of Windows 8 currently runs as an application of Windows 8. It is what allows the interaction between the start screen and the desktop.

  You can always use the Office to open these applications by pinning them to the taskbar, just as you did in Windows 7.

  I mentioned that the splash screen is the replacement for the Start Menu. If applications Desktop opens in the screen start, it would be like their opening on the top the Windows 7 Start Menu.  :)

  Concerning

• When we try to install all applications on the Cloud Office it crashes at 90%. If we run the application it works. If we try to update the application from the desktop cloud it hangs at 50%. We have already reconfigured MAC and re-installed the

  When we try to install all applications on the Cloud Office it crashes at 90%. If we run the application it works. If we try to update the application from the desktop cloud it hangs at 50%. We have already reconfigured MAC and re-installed the application of desktop application and cloud several times. The OS is Yosemite.

  Hello

  Please, try the following steps:

  • Log out of the desktop Adobe CC application. (https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html)
  • Set the "Read and write" permissions on the files of Adobe for all users in the following locations:
    • / Library/Application Support /.
    • /Users/ [user name] / Library/Application Support /.
  • Restart the computer.
  • Connect to the desktop Adobe CC application.

  Kind regards

  Sheena

• Firefox is compatible with the window Surface Pro and Win Phone 8

  Firefox is compatible with the window Surface Pro and Win Phone 8

  A user has posted here the other day that uses a Surface Pro 2 with Windows 8.1, then it should work basically the way it works on a desktop or laptop computer.

  Windows Phone, I don't think.

• CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

  Oscar

  Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

  The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

  You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

  You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

  If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).

• I downloaded Windows 7 Pro and secure download manager. When I click the button start nothing happens.

  I downloaded Windows 7 Pro and secure download manager. When I click the button start nothing happens. What do you think is the problem?

  original title: failure to launch

  Where did you downloaded it go?

  Looks like it was not Ms.