Cannot access portfolio after the upgrade to iOS 10

Similar Questions

• MapInfo cannot access data after the upgrade to oracle 10.2.0.4

  I meet a problem concerning MapInfo and Oracle. We use MapInfo Professional 7.8 and up the short Oracle 10.2.0.3
  We have updated our Oracle database to 10.2.0.4 and noted that MapInfo can no longer access the data. Tracing gives the following query fails.
  
  Select count (1) of the
  (select diminfo
  of all_sdo_geom_metadata
  where table_name = 'COUNTIES '.
  and column_name = 'GEOM '.
  and owner = 'TOMI')
  
  Oracle does not accept it.
  
  Old post on sound seemed dead since mid-2008.
  
  Does anyone know if Mapinfo and Oracle have done something about it?

  It's bug 7046751, and it seems that there is a patch available for it on top of 10.2.0.4.

  Siva

• Cannot make or receive phone calls after the upgrade to iOS 9.3

  Can't scream: cannot make or receive phone calls after the upgrade to iOS 9.3

  SOLVED

  Went into settings,

  Cell phone,

  Cellular data options,

  then change the setting to EnableLTE OFF,

  It's for my at & t att, iphone 6 s

  No joy for me.  I can't make calls, but I can not receive or use call forwarding.  So frustrating!

• My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?

  My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?

  I guess it is asking you to CREATE an access code. You can disable it later.

• Cannot make or receive phone calls after the upgrade to iOS 9.2

  Last night, I could make and receive phone calls. This morning I upgraded to iOS 9.1 to 9.2, and now I can't make or receive calls.

  Any call I make - other iPhones, to landlines, whether on my list of Favorites or not - says 'call X... '. "(where X is the name of the contact - X is omitted if I don't dial a contact). After a few seconds, the phone says "Call ended." and I get three quick tones.

  When they call me, it goes to voicemail once they hear 1 or 2 rings. I don't hear anything. The call does not appear in the 'recent' folder, but I received a voice message.

  I don't have to "do not disturb" lit.

  My iPhone is a 4 s, which can be a key because my wife has a 5. She has just upgraded and has no problem with calls. We are both on the Sprint network, using 'Ting' which is a dealer - so our actual provider's Ting. My phone says "Version 9.2 (13 c 75)", carrier "Sprint 23.0" and model MD377LL/A."

  I turned the phone on and off several times, and also to do a reset (now hold both power and home until the apple logo appears). neither helped. I double-clicked the original key and removed the phone application and all other applications, then restarted the phone application, which also helped.

  WiFi works.

  A related issue is to: IOS 9.2 update .

  OK, now it works.

  I think that what I had was specific to my carrier - as well as anyone with this problem likely needs to communicate with their provider!

  For Ting (Sprint), here's what I had to do:

  1. to connect to a Wi - Fi network

  2. dial # 873283 #.

  3. press the call key

  4. press "Start Service Update" and wait a minute or two.

  5. press on "Full Service Update" and wait a minute or two for the phone to reconnect to the Sprint network.

  6. once the upper line shows that Sprint is connected, I could make and receive phone calls.

  Greg

• iPhone 6 touch id cannot be added after the upgrade ios 9.3.5

  My iPhone6 more ' Touch ID ceased to operate after the sound ' iOS to 9.3.5. This never happened with the previous iOS updates. Soft reboot (button home + power until the display of the apple logo) didn't work. Turn off the two "use Touch ID" for Unlock iPhone & iTunes App Store, then reboot and or soft reboot didn't work. Tried to 'Add a fingerprint', but as soon as it has been exploited, it goes directly to the page saying: 'FAIL' unable to complete installation of contact ID. Back... I even deleted all to restore my backup who had an operation 9.3.4 iOS, but then, I realized that after the restoration, put also got iOS updated! (I'm back to 0). Please help if you have any other fix for this? Thank you.

  Restoring as a NEW phone using iTunes (do not use backup at all).  Adding 3rd party applications, try the contact ID.  If it still does not work, then you have a hardware problem and will need to bring the phone to Apple for the assessment.

  Best,

  GDG

• Use of data cell after the upgrade to iOS 10.0.2 has increased dramatically

  Hello:

  I noticed a HUGE increase in mobile data usage by my phone (iPhone 6s) after the iOS to 10.0.2 update.    I had not changed anything since before the update.  A few days after my phone iOS update my more than double to 15 days prior to the cell data update!   I went under a GB to 2.2 GB for two days.  I am only allowed 2.5 GB of my company.   Assist of WiFi was interrupted. I am connected to a wifi most of the time, all day at the office and at home in the morning and in the evening.  I haven't changed my phone usage habits nor have I down loaded new applications.   I also did all the stuff reset once I downloaded the update as turning on and off, hold down home and appears on the sides until that little Apple.

  I looked in the cell parameters section and noticed a few things that consume more data:

  Facebook: I had disabled cell Facebook use.   However, there was a large amount of data used. I also, by habit, only check Facebook when I'm at a known wifi spot as the House or the office.   It was less than a MB before and near a GB of data in 2 days.

  YouTube: Idem, had turned off cell phones and only look at the House.

  Maps - never used but the use of data.

  e-mail-HUGE amount of data used.  Normal use for me. in the past, the amount of data has been a MB.  Now it's 65 MG in 2 days,

  Siri - I do not use Siri as in "Hey Siri" or by using voice commands.  I use it from time to time to the voice on texts.

  AccuWeather.  Even.

  It's just as much as the apps that I use, the rest is electronic mail and stuff systems.   I uninstalled nearly all applications except for the few that I need as my ticket train and planning aps and mail want to stop this.   I won't send any imessages anymore.

  Quite an experience of something like that?

  Yes! I have iPhone 6 - after that the update almost all my data is gone for the month! I do not have Wifi Assist on and I only use data when I'm home and can connect to Wifi!

  I see my iPhone to connect to my Wifi then bounce to the cellular network. I have no problem with my home wifi network. This problem also occurs in the work. In addition, the network at work requires the password to the network - I type in iPhone tells me it's the wrong password, and then it connects. Then it disconnects after 2 minutes.

  I tried to reset the Wifi feature. Help!

• Cannot turn off after the upgrade to 10.11.4

  I have a late 2012 3.4 ghz i7 iMac / 32 RAM 10.11.4 running (and other iMacs around the office): I can't stop. When I try a stop down (after removal of servers/TimeMachine, close all applications - even unplugging the ethernet cable) - it goes to a black screen with the "circle of rotation of lines." They will be 'spin' this weekend if I let him. Instead, I'll put the machine to sleep during the week and make a hard cock down via the power button Friday night.

  I think it has something to do with the upgrade to 10.11.4. I have reset the PRAM and tried also to start up in the 'hidden' startup disk and first aid running without result. Tried to find preferences for throw - unsuccessfully - Finder found "com.apple.finder.sfl" I should throw?

  Another change is that now I'm using a new Pegasus2 18 to RAID hooked up via "2016" MacMini and Apple server software (replaced my Apple XServe)

  Someone at - there a method I can use to stop? Thanks for your help!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• After the upgrade to iOS 9.2, I have no service and my battery drains quickly

  I have an iPhone 6. I live in England.

  I have upgraded to iOS 9.2 two days ago and I saw two problems since:

  1. I can not get any mobile service. I see the 'no. Service' at the top left of the home screen when I try to search for the service. A Wi - fi connection still works fine. I turned my phone off and on again, and while it does not find service briefly, it goes quickly back to 'No Service'. I tried to enter the Mobile Carrier settings area and deactivate the options, turn it back on. Nothing has worked.
  2. My battery drains very quickly. It is 14:12 in the afternoon and I currently have 29% of battery. Usually I didn't have come down below 60% when I get home at 5 pm, because I do not use my phone very strongly. The Gmail application took 35 percent of my independence despite spending only 9 minutes on screen. My phone is hotter that it would normally be.

  I have heard that when a mobile phone search service repeatedly, it uses a lot of battery. This phone has been updated with the airplane Mode + Wi - fi since this morning - I did have this service at any time you are looking for today.

  People have recommended reset my settings, but I don't know what this will do to my phone, so I didn't, as whenever someone suggests it, it does not work for the afflicted person.

  Is there anywhere I can check the reports of bugs with the 9.2 release? I feel like there is a problem with it, but I don't see anything on the internet to suggest that.

  See if this article helps you: If you can not connect to a cellular or cell - data Apple Support Network

• XP - cannot install updates after the upgrade to Quickbooks 2010

  I am running XP Professional.  Since the upgrade to Quickbooks 2010, I can not install three MS updates, and can I update Adobe Reader version 8 to version 9.  The MS updates remaining in my queue are:

  1 Microsoft.Net Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847)

  2 Microsoft SQL Server 2005 Express Edition SP3 (KB955706)

  3 update for .NET Framework 2.0 SP2 and 3.5 SP1 on the Windows 2003 and Windows XP x 86 service provider (KB983583).

  It has been several weeks now and today my TrendMicro PC-Cillin Internet Security 14 security check revealed that I have for very high Security - Bulletins-MS10-056 and MS10-060

  What can I do to fix these problems

  Assuming (by reference to one of the titles of any updates you are 'problems' with) you have Windows XP _ Edition with Service Pack _ 32-bit - here's what I suggest:
   
  Clean and fix the usual suspects

   

  Restart, and then log on as a user with administrative privileges.

  Difficulty your file or registry permissions...

  Ignore the title and follow the subsection under
  "Advanced Troubleshooting", titled,
  "Method 1: reset the registry and the file permissions.
  http://support.Microsoft.com/kb/949377
  * will take time
  * Skip the last step (6) - I hope you have SP3 installed.

  But if not - is not the time.

  You may see errors go even if you watch, count upwards.  NO.
  worries at the moment.

   

  Restart, and then log on as a user with administrative privileges.

   

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  SuperAntiSpyware
  http://www.SUPERAntiSpyware.com/

  Restart, and then log on as an administrative user.

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  MalwareBytes
  http://www.Malwarebytes.com/

  Restart, and then log on as an administrative user.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx

  You find nothing, you will only find cookies, you may think that it is a
  waste of time - but if do you these things and report back here with what you
  / don't think you do all that - you add more parts to
  the puzzle and all of the picture just may become clearer and your
  problem solved.

  Restart, and then log on as an administrative user.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Restart, and then log on as an administrative user.

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your drive C:\.  After you have saved in the
  root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'run.) --> Click on NEXT--> select 'I agree' and click
  THEN--> when it completed the installation, click "Finish"...

  Restart, and then log on as an administrative user.

  Visit this web page:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ... and click on the "Microsoft Fix it."  When asked, select "RUN."
  both times.  Check the box "I agree" and click "next".  Select the check box

  
  to "Run the aggressive options (not recommended)" and click "next".  Let
  He finish and follow the instructions until it does.  Close/exit and
  reset when it is.
   
  You should now perform a full CHKDSK on your system drive (C :)...)

  How to scan your disks for errors
  http://support.Microsoft.com/kb/315265
  * will take time and a reboot

  You should now perform a full defragmentation on your system drive (C :)...)

  How to defragment your hard drives
  http://support.Microsoft.com/kb/314848

  
  * will take time
   
  When is the last time you checked the updates for your motherboard
  chipset drivers, device/video card drivers, sound card / drivers
  and the credit card network / device drivers?  You can do now.
  The easiest way is to visit the website of your computer manufacturer
  If it's something like Dell, HP, Lenovo, gateway, etc.  There, you can
  Find the support/downloads/drivers section and look for the drivers
  for your computer model.  I suggest you obtain these updates.

  Uninstall applications from any third party firewall (ZoneAlarm, etc.)
  and use the built-in firewall of Windows only.

  Log in as a user with administrative rights and open Internet Explorer
  and visit http://windowsupdate.microsoft.com/ and select to make a
  CUSTOM scan...

  Whenever you are about to click on something in these pages - web
  first of all, press on and hold down the CTRL key while you click on it.  You can
  release the CTRL key after clicking on each time.

  Once the scan is complete, select that ONLY updates of high priority
  (deselect all others) and install it.

  Reboot again.

  If it worked - try the web page - selection not more than 3-5 a
  time.  Reboot as needed.

  The optional software updates are generally safe - although I recommend
  against the 'Windows Search' one and all of the "Office Live" those or
  "Windows Live" which for the moment.  I would like to avoid completely the
  Optional hardware updates.

  Seriously - do these things.  It's like antibiotics - do not skip a single
  step, don't leave because you think it will be ok now - review
  until the end, until you have done all given in the order shown.  If
  you have a problem with a step to ask and let someone here, you get
  Thanks to this step.  If you do not understand how to bring one back
  and ask here on this step and let someone guide you through it.

  Then - actually - that everyone here knows if it worked for you - or if
  you have more questions.

  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Game Center App has been removed after the upgrade to iOS 10.1

  Hello

  Since I've updated by phone (iPhone 5 s) iOS 10.1 I see no Game Center app in my apps list.

  How can I get it back?

  Thank you

  Hello Srikanth1520,

  Thank you for using communities of Apple Support.

  I see after update your iPhone to iOS 10, you don't see the Game Center app in your app list. I understand, I use Game Center too much and want to help you with this.

  In iOS 10, Game Center as removed from the home screen. You can still access the Game Center profile and let invites players nearby by following this path: settings > Game Center.

  All the best.

• After the upgrade to IOS 9.3.2 my screen freezes

  After upgrading my 6 + iOS 9.3.2 my screen freezes and does not respond.  Currently running applications continue to run, but I can't interact with them.  If I go back to the phone later, the problem disappeared, but I don't know how long it took.  Then the problem comes back.  Even after a factory reset, with none of the applications running, my screen will freeze.

  scottfromlucas wrote:

  After upgrading my 6 + iOS 9.3.2 my screen freezes and does not respond.  Currently running applications continue to run, but I can't interact with them.  If I go back to the phone later, the problem disappeared, but I don't know how long it took.  Then the problem comes back.  Even after a factory reset, with none of the applications running, my screen will freeze.

  When you say factory reset, did your restore as new or from a backup?

  If restore you to the new and the problem persists, I make an appointment with the genius bar and take your phone to Apple and looked at him.

• Cannot access drive after the replacement of material

  I had some hardware problems with my computer recently.  I don't know who that resulted, but the card mother SATA controller and boot hard drive were damaged and had to be replaced.  I replaced the motherboard with the same exact model and the boot disk with a large (300 GB) version of the same model.  All data stored on a RAID1 different set (Mirrored) which does not seem to have been damaged.  The RAID1 set had permissions to full access from the account administrator «MainUser»  There was also an active guest account who did not have access to this drive.

  After replacing the drive start-up and the motherboard, I restalled Windows XP 32 bit operating system using the same CD of installation, login names and password that were used previously.  However, I can't access the data reader.

  I can see the drive in Windows Explorer.  I was able to change the drive letter to the old letter.  When I try to rename the drive I get the message Invalid Volume Label "You do not have sufficient rights to perform this operation."  When I try to explore the disc I get the message post work "R:\ is not accessible.  Access is denied. »

  Motherboard: Asus M2N - SLI Deluxe
  C:\ Boot disk: WD Raptor 300 GB
  R:\ Data drive: RAID1 (mirror) WD 750 GB

  How can I have access to the whole drive RAID1?

  You will have to take possession of it . Or download the file here .

• Vista one network does. -Cannot access network after the first time it is connected

  I have a network of 4 XP machines 1 XP Pro machine 1 Vista machine at home and a home server system. Everything works fine except the machine Vista seems to be able to access the network once and after that it will be impossible to see the other system or access in any way. Anyone has any idea what exactly is happening?

  This article addresses an issue where the XP computers do not appear in the Vista network map:http://support.microsoft.com/kb/922120.  It can solve this particular problem.

  As far as the server goes, which is beyond the scope of this forum. Please repost in Windows Home Server Forum:http://social.microsoft.com/Forums/en-US/category/WindowsHomeServer/ , where experts in these servers will be happy to help you connect to it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My 5s iphone battery dies on a call after the upgrade to ios 10

  My iphone battery drains when a call after updating to ios 10? Why this is happening? battery decreases even in navigation... Please give me a solution!

  Try to configure your phone according to these http://www.apple.com/batteries/maximizing-performance/ tips