MapInfo cannot access data after the upgrade to oracle 10.2.0.4

Similar Questions

• Cannot access portfolio after the upgrade to iOS 10

  I haven't seen this pop up on other forums yet, but my iPhone 6 Plus does not double tapping on my lock screen after that I upgraded to iOS 10.

  I went into the settings of the portfolio and Apple pay and made sure that allow access when it is locked is on.  Does anyone else know this?

  I'm having the same problem

• cannot access data for the ipad

  • I broke my touch screen of the iPad that it no longer responds when I touch it but everything else still works I connect my iPad to iTunes and it says to respond to my iPad, but I can't because the touchscreen does not allow me to unlock it (there is no access code). I fixed my screen twice by a part of the third and the third time, the touch screen started ghosts then I dropped it the screen cracked and now the touchscreen does not work. However, he always ghost sometimes, but rarely. All I want to do now is get my data off the unit. can anyone help?

  If you have connected the iPad to a computer, try to use the same computer, it shouldn't you Guest if you confidence before.

  On the alert to "trust this computer" on your iPhone, iPad or iPod touch - Apple Support

• Cannot turn off after the upgrade to 10.11.4

  I have a late 2012 3.4 ghz i7 iMac / 32 RAM 10.11.4 running (and other iMacs around the office): I can't stop. When I try a stop down (after removal of servers/TimeMachine, close all applications - even unplugging the ethernet cable) - it goes to a black screen with the "circle of rotation of lines." They will be 'spin' this weekend if I let him. Instead, I'll put the machine to sleep during the week and make a hard cock down via the power button Friday night.

  I think it has something to do with the upgrade to 10.11.4. I have reset the PRAM and tried also to start up in the 'hidden' startup disk and first aid running without result. Tried to find preferences for throw - unsuccessfully - Finder found "com.apple.finder.sfl" I should throw?

  Another change is that now I'm using a new Pegasus2 18 to RAID hooked up via "2016" MacMini and Apple server software (replaced my Apple XServe)

  Someone at - there a method I can use to stop? Thanks for your help!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• XP - cannot install updates after the upgrade to Quickbooks 2010

  I am running XP Professional.  Since the upgrade to Quickbooks 2010, I can not install three MS updates, and can I update Adobe Reader version 8 to version 9.  The MS updates remaining in my queue are:

  1 Microsoft.Net Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847)

  2 Microsoft SQL Server 2005 Express Edition SP3 (KB955706)

  3 update for .NET Framework 2.0 SP2 and 3.5 SP1 on the Windows 2003 and Windows XP x 86 service provider (KB983583).

  It has been several weeks now and today my TrendMicro PC-Cillin Internet Security 14 security check revealed that I have for very high Security - Bulletins-MS10-056 and MS10-060

  What can I do to fix these problems

  Assuming (by reference to one of the titles of any updates you are 'problems' with) you have Windows XP _ Edition with Service Pack _ 32-bit - here's what I suggest:
   
  Clean and fix the usual suspects

   

  Restart, and then log on as a user with administrative privileges.

  Difficulty your file or registry permissions...

  Ignore the title and follow the subsection under
  "Advanced Troubleshooting", titled,
  "Method 1: reset the registry and the file permissions.
  http://support.Microsoft.com/kb/949377
  * will take time
  * Skip the last step (6) - I hope you have SP3 installed.

  But if not - is not the time.

  You may see errors go even if you watch, count upwards.  NO.
  worries at the moment.

   

  Restart, and then log on as a user with administrative privileges.

   

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  SuperAntiSpyware
  http://www.SUPERAntiSpyware.com/

  Restart, and then log on as an administrative user.

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  MalwareBytes
  http://www.Malwarebytes.com/

  Restart, and then log on as an administrative user.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx

  You find nothing, you will only find cookies, you may think that it is a
  waste of time - but if do you these things and report back here with what you
  / don't think you do all that - you add more parts to
  the puzzle and all of the picture just may become clearer and your
  problem solved.

  Restart, and then log on as an administrative user.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Restart, and then log on as an administrative user.

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your drive C:\.  After you have saved in the
  root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'run.) --> Click on NEXT--> select 'I agree' and click
  THEN--> when it completed the installation, click "Finish"...

  Restart, and then log on as an administrative user.

  Visit this web page:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ... and click on the "Microsoft Fix it."  When asked, select "RUN."
  both times.  Check the box "I agree" and click "next".  Select the check box

  
  to "Run the aggressive options (not recommended)" and click "next".  Let
  He finish and follow the instructions until it does.  Close/exit and
  reset when it is.
   
  You should now perform a full CHKDSK on your system drive (C :)...)

  How to scan your disks for errors
  http://support.Microsoft.com/kb/315265
  * will take time and a reboot

  You should now perform a full defragmentation on your system drive (C :)...)

  How to defragment your hard drives
  http://support.Microsoft.com/kb/314848

  
  * will take time
   
  When is the last time you checked the updates for your motherboard
  chipset drivers, device/video card drivers, sound card / drivers
  and the credit card network / device drivers?  You can do now.
  The easiest way is to visit the website of your computer manufacturer
  If it's something like Dell, HP, Lenovo, gateway, etc.  There, you can
  Find the support/downloads/drivers section and look for the drivers
  for your computer model.  I suggest you obtain these updates.

  Uninstall applications from any third party firewall (ZoneAlarm, etc.)
  and use the built-in firewall of Windows only.

  Log in as a user with administrative rights and open Internet Explorer
  and visit http://windowsupdate.microsoft.com/ and select to make a
  CUSTOM scan...

  Whenever you are about to click on something in these pages - web
  first of all, press on and hold down the CTRL key while you click on it.  You can
  release the CTRL key after clicking on each time.

  Once the scan is complete, select that ONLY updates of high priority
  (deselect all others) and install it.

  Reboot again.

  If it worked - try the web page - selection not more than 3-5 a
  time.  Reboot as needed.

  The optional software updates are generally safe - although I recommend
  against the 'Windows Search' one and all of the "Office Live" those or
  "Windows Live" which for the moment.  I would like to avoid completely the
  Optional hardware updates.

  Seriously - do these things.  It's like antibiotics - do not skip a single
  step, don't leave because you think it will be ok now - review
  until the end, until you have done all given in the order shown.  If
  you have a problem with a step to ask and let someone here, you get
  Thanks to this step.  If you do not understand how to bring one back
  and ask here on this step and let someone guide you through it.

  Then - actually - that everyone here knows if it worked for you - or if
  you have more questions.

  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• iPhone 6 touch id cannot be added after the upgrade ios 9.3.5

  My iPhone6 more ' Touch ID ceased to operate after the sound ' iOS to 9.3.5. This never happened with the previous iOS updates. Soft reboot (button home + power until the display of the apple logo) didn't work. Turn off the two "use Touch ID" for Unlock iPhone & iTunes App Store, then reboot and or soft reboot didn't work. Tried to 'Add a fingerprint', but as soon as it has been exploited, it goes directly to the page saying: 'FAIL' unable to complete installation of contact ID. Back... I even deleted all to restore my backup who had an operation 9.3.4 iOS, but then, I realized that after the restoration, put also got iOS updated! (I'm back to 0). Please help if you have any other fix for this? Thank you.

  Restoring as a NEW phone using iTunes (do not use backup at all).  Adding 3rd party applications, try the contact ID.  If it still does not work, then you have a hardware problem and will need to bring the phone to Apple for the assessment.

  Best,

  GDG

• SANHQ report of the firmware is up to date after the upgrade

  I just updated our SAN we receive alerts about readers being obsolete.  The upgrade was successful, but I still get alerts on this issue.  for example:

  • [ID: 3.7] Review: Firmware disk disk 23 for STB-PS4100 member is obsolete. Connect on-site support Dell EqualLogic customer to https://eqlsupport.dell.com/secure/login.aspx and download the current drive firmware and instructions. Support of important disc information: number of model-ST900MM0006, revision of the Firmware LE08 and number series-S0N1XN8B

  Anyone have any idea why this is happening and how to fix it?

  Thank you

  You are looking for a tree in the evil forest ;)

  Download

  or simply click on PS Firmwares, scroll down a bit and extend "Recommended PS Series hard drive Firmware". You will see a cover and download *.tgz and a *.pdf. Download the *.tzg and take a look at the PDF How do to download the tgz and begin the process of updating command line (once again... EQL Groupmanager does not help).

  .

• User removed after the upgrade to Oracle 12 c

  Hello

  Recently, I tried to update my database to Oracle Database 11 g Release 2 (11.2.0.4 and 11.2.0.3). After completing the "database upgrade Assistant" running, I discovered that the user logged on to my diet has been removed and I can not access the system.

  During the upgrade of the "Upgrade database Wizard" process I couldn't remember see all which implies that the use could be deleted, pouvez please let me know what could I have possibly missed?

  Notice that I can have full access to the user sys and system.

  Thanks in advance.

  The upgrade doesn't drop not all database users.

  I guess you mean the database user (account) - as visible in DBA_USERS.

  Don't have you list the user names in DBA_USERS?

  What is the error you get when you try to connect?  Distinction case password would result by "ORA-01017: name of user and password invalid; logon denied error message", simply because the failure of the validation of password (even if the user exists in the database)

  Hemant K Collette

• Failed to start after the upgrade of Oracle 10.2.0.4 EM 10.2.0.1

  Hi all:
  
  On a mouth there, we went to 10.2.0.4 for Oracle DB. When I started EM, he showed from. But I can't open 'EM from the browser.
  
  I started the EM of the console, and instructions are given below:
  
  [oracle@myhost ~] $ emctl start dbconsole
  TZ set to ROCK
  Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
  Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
  https:// < myhost.domain >: 1158, em, console, aboutApplication
  Oracle Enterprise Manager 10 g Database Control from... began. < = seemed began.
  ------------------------------------------------------------------
  Logs are generated in the directory /u01/app/oracle/product/10.2.0/db_1/ < myhost.domain > _ < myhost >/sysman/log
  [oracle@myhost ~] $ emctl status dbconsole < = I checked em State immediately.
  TZ set to ROCK
  Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
  Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
  https:// < myhost.domain >: 1158, em, console, aboutApplication
  Demon of the MA does not run. < = he did not run.
  ------------------------------------------------------------------
  Logs are generated in the directory /u01/app/oracle/product/10.2.0/db_1/ < myhost.domain > _ < myhost >/sysman/log
  [oracle@myhost ~] $
  
  Our playform of the OS is Linux AS4.
  
  Could someone give me some advice? Thanks in advance.

  When you actually perform the upgrade? And what time zone do you use?

  More precisely, you are in a time zone that has changed over the last 4 years? For example, most of the North America ended up with a time change advanced new savings in a few years and makes the Enterprise Manager very angry.

  One suggestion I have is to delete and re-create the MA. The following commands will do the job after asking the huge pile of questions

  EMCA - deconfig dbcontrol db-rest drop
  EMCA - config dbcontrol db-rest create

  http://download.Oracle.com/docs/CD/B19306_01/EM.102/b40002/structure.htm#sthref73 describes the commands.

  Since you have the patch, you obviously have access to Oracle Support. I suggest you also, you open a SR.

• Cannot access drive after the replacement of material

  I had some hardware problems with my computer recently.  I don't know who that resulted, but the card mother SATA controller and boot hard drive were damaged and had to be replaced.  I replaced the motherboard with the same exact model and the boot disk with a large (300 GB) version of the same model.  All data stored on a RAID1 different set (Mirrored) which does not seem to have been damaged.  The RAID1 set had permissions to full access from the account administrator «MainUser»  There was also an active guest account who did not have access to this drive.

  After replacing the drive start-up and the motherboard, I restalled Windows XP 32 bit operating system using the same CD of installation, login names and password that were used previously.  However, I can't access the data reader.

  I can see the drive in Windows Explorer.  I was able to change the drive letter to the old letter.  When I try to rename the drive I get the message Invalid Volume Label "You do not have sufficient rights to perform this operation."  When I try to explore the disc I get the message post work "R:\ is not accessible.  Access is denied. »

  Motherboard: Asus M2N - SLI Deluxe
  C:\ Boot disk: WD Raptor 300 GB
  R:\ Data drive: RAID1 (mirror) WD 750 GB

  How can I have access to the whole drive RAID1?

  You will have to take possession of it . Or download the file here .

• How to recover data after the upgrade to Windows XP Home Edition?

  Original title: lost data

  My Windows XP program has been replaced by Windows XP Home Edition. Some data was not justified.

  Is it possible to recover the data?

  My Windows XP program has been replaced by Windows XP Home Edition. Some data was not justified.

  Is it possible to recover the data?

  First of all, please note that Windows XP Home Edition is an edition of Windows XP. So it makes no sense to say that your "Windows XP program has been replaced by Windows XP Home." Exactly what edition of Windows XP you have before it was replaced with XP Home?

  In the second place, who did the replacement, and exactly how it was? Was this an upgrade? A new installation? He did go in Windows or by booting from the CD XP Home?

  Thirdly, it was not justified to exactly what data?

  Fourth, it depends on your answers to the above questions, but in all likelihood, it says No Mo is quite right: If you do not have a backup of your data on an external, you're probably out of luck, and the data are gone.

  You can read this article on the backup that I wrote: 'Return to top your computer regularly and reliable' to http://www.computorcompanion.com/LPMArticle.asp?ID=314

• Vista one network does. -Cannot access network after the first time it is connected

  I have a network of 4 XP machines 1 XP Pro machine 1 Vista machine at home and a home server system. Everything works fine except the machine Vista seems to be able to access the network once and after that it will be impossible to see the other system or access in any way. Anyone has any idea what exactly is happening?

  This article addresses an issue where the XP computers do not appear in the Vista network map:http://support.microsoft.com/kb/922120.  It can solve this particular problem.

  As far as the server goes, which is beyond the scope of this forum. Please repost in Windows Home Server Forum:http://social.microsoft.com/Forums/en-US/category/WindowsHomeServer/ , where experts in these servers will be happy to help you connect to it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot update iTunes after the upgrade to Windows 10

  Any attempt to upgrade and/or uninstall to start a completely new download, which brings me to this error message:

  "the component you are trying to use is on a network unavailable resource. '"

  It seems that it does not find the iTunes files. Microsoft has been of no help.

  Start here: MSI missing errors. Look at the rest of the edge if necessary.

  TT2

• Device feature feature ceased after the upgrade of oracle MAF 2.2.1

  Hello

  My Google maps, messaging features stopped after that I upgraded the Oracle of the MAF from 2.1 to 2.2.1.

  

  Thank you

  Diattou

  For the plan, it could be number 2 in the problems here:

  MAF 2.2.1 Release notes

  How you connect to the server?

  You specify the server connection using http somewhere? You will probably need to change to be https instead.

  See migration notes here - https://blogs.oracle.com/mobile/entry/oracle_maf_2_2_1

• Access to the data after the managed service VOImpl in bean method call

  I use JDeveloper 11.1.2.4.

  I created a method to Interface customer and he calls you a managed bean.

  The method is exposed in the control of data and I have a links to it through links on the page.

  The method runs just a view of criteria for a row of data in the database.

  But, because the method does not have a return value, how could access the View object data.

  Here's the Service method and the method of the bean management;

  The service method: in PersonVOImpl.java - should result in 1 row:

  public void getPersonByCnViewCriteria (String cn)

  {

  ViewCriteria viewCriteria = this.getViewCriteria ("PersonVOCriteriaByCn");

  Reset a display criteria of values that may was resolved at design time

  viewCriteria.resetCriteria ();

  this.setCnBind (cn);

  this.applyViewCriteria (viewCriteria);

  this.executeQuery ();

  }

  Method in managed Bean: I have a linking operation method to access the Service method.

  
  

  It seems that the Service method is executed successfully.  But, how to access the data after the call?
  

  
  

  protected void getPersonByCn (String cn)

  {

  BindingContainer bindingContainer = this.getBindings ();

  OperationBinding operationBinding = bindingContainer.getOperationBinding("getPersonByCn");

  Map operationsParamsMap = operationBinding.getParamsMap ();

  operationsParamsMap.put (WorkFlowBean.PROPERTY_CN, NC);

  Object result = operationBinding.execute ();

  If (! operationBinding.getErrors () .isEmpty ())

  {

  }

  
  

      // How to access data after the call?
  

  }

  You should never use a class VOImpl or VORowImpl in a managed bean. If you have to use them, create Interfaces and use.

  I'm not too sure if it's good to return a view in a method object.